This is where you can browse products in this store.
Showing 1–48 of 168 results
High limit switch for Carrier, Bryant and Payne equipment, recorded as a 3 inch style rated L230 degrees F. It provides over-temperature protection by opening the control circuit when the sensing element reaches the set point.
24V DPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Double-pole single-throw for controlling two circuits simultaneously.
Snap-disc furnace high-limit switch from the DL series; the number is the opening (cut-out) temperature in degrees F. It is a safety device that breaks the heating circuit when the plenum overheats, and a limit that keeps tripping points at restricted airflow or a failed blower rather than at the switch.
Carrier/Bryant/Payne rectifier board. Converts AC to DC for relay control in electric heat systems. OEM part HK61EA033, replaces older HK61EA003.
Rheem 47-22860-02 auto reset limit switch with built-in anticipator, opens at 110°F. Replaces 47-22860-06. OEM for Rheem and Ruud furnaces.
Supco SLS170 auto reset micro limit switch, opens at 170°F, closes at 130°F. Compact design with angled terminals. Universal fit for furnaces and unit heaters.
Carrier HH18HA452 manual reset rollout limit switch, opens at 250°F. Large base, micro size. OEM flame rollout switch for Carrier, Bryant, and Payne furnaces.
Rheem 47-104990-04 high limit switch, 3-inch insertion, odd base, opens at 150°F. Auto reset. OEM replacement for Rheem and Ruud furnaces.
Rheem 42-105601-29 furnace pressure switch, -0.20″ WC. OEM Rheem part that also cross-references to Carrier HK06WC090. Works in both Rheem and Carrier furnaces.
Carrier HH12ZB160 high limit switch, 3-inch insertion, opens at 160°F. Auto reset. Crosses to Trane SWT01257. For Carrier, Bryant, Payne, and Trane furnaces.
York S1-02435271000 furnace pressure switch, -0.50″ WC. OEM for York, Coleman, and Luxaire furnaces. Replaces 024-27576-000, 49L91, and C341750P01.
Carrier HH18HA499 auto reset limit switch, opens at 165°F, closes at 125°F. Large base, micro size. Crosses to HH18HA169, HH18HA508, 20162903. OEM Carrier part.
Goodman B1370819 furnace door safety switch. Kills power when the furnace access panel is removed. Prevents the blower and burner from running during maintenance.
Nordyne 626404R double-pole limit switch, opens at 145°F. Dual-stack design for Nordyne, Miller, and Intertherm furnaces. Also listed as 626404.
Supco SLS200 auto reset micro limit switch, opens at 200°F, closes at 160°F. Compact design with angled terminals. Universal fit for furnaces and unit heaters.
Amana 10735201 flame sensor with 90-degree bend and single mounting hole. Fits Amana, Goodman, and Janitrol furnace models. OEM replacement part.
Snap-disc furnace high-limit switch from the DL series; the number is the opening (cut-out) temperature in degrees F. It is a safety device that breaks the heating circuit when the plenum overheats, and a limit that keeps tripping points at restricted airflow or a failed blower rather than at the switch.
Temperature limit switch for Carrier, Bryant and Payne furnaces, recorded in our system as style MALB with a 200 degree F setting.
Carrier HH18HA416 manual reset limit switch, opens at 215°F. Large base, micro size. OEM replacement for Carrier, Bryant, and Payne furnaces.
Snap-disc furnace high-limit switch from the DL series; the number is the opening (cut-out) temperature in degrees F. It is a safety device that breaks the heating circuit when the plenum overheats, and a limit that keeps tripping points at restricted airflow or a failed blower rather than at the switch.
Rheem 47-25349-01 high limit switch, 3-inch insertion, odd base, opens at 160°F. Auto reset. Kit version (47-25349-01K). OEM for Rheem and Ruud furnaces.
Snap-disc furnace high-limit switch from the DL series; the number is the opening (cut-out) temperature in degrees F. It is a safety device that breaks the heating circuit when the plenum overheats, and a limit that keeps tripping points at restricted airflow or a failed blower rather than at the switch.
Goodman B1370133 furnace pressure switch, -0.35″ WC. OEM replacement for Goodman gas furnaces. Monitors inducer draft for safe ignition.
24V TPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Triple-pole single-throw for staging three circuits. Different timing than 42-23116-07.
Furnace high-limit switch from the MAL series. A limit is a safety control: its normally closed contacts open to shut down the heating circuit when plenum temperature climbs past the set point.
36-inch universal thermocouple for gas furnaces and water heaters. Stainless steel with universal adapter fittings. Fits most standing-pilot gas appliances.
Manual reset micro limit switch, opens at 130°F. Push-button reset after trip. Universal replacement for Supco SRL130 and Packard PRL130. Used in furnaces and heaters.
Carrier HH18HA148 auto reset limit switch, opens at 150°F. Large base, micro size. Crosses to 20162904S. OEM for Carrier, Bryant, and Payne systems.
24V DPDT heat sequencer (2 switches). Supco Q103. Controls a heating element and a blower motor on timed delays. Replaces 24A34-3.
Manual reset micro limit switch, opens at 350°F. Commonly used as a flame rollout switch. Replaces 47-22861-01, B1370154, SRL350. Fits Goodman/Rheem furnaces.
Goodman 0130F00508 dual furnace pressure switch, -0.55″ and -0.30″ WC. Two-stage switch for Goodman, Amana, and Janitrol furnaces with two-stage inducer motors.
Manual reset micro limit switch, opens at 260°F. Push-button reset after trip. Replaces Supco SRL260 and Packard PRL260. Universal fit for residential furnaces.
24-inch universal thermocouple for gas furnaces and water heaters. Stainless steel with universal adapter fittings. Most common thermocouple length for residential systems.
Carrier HH18HA505 auto reset limit switch, opens at 235°F, closes at 195°F. OEM replacement for Carrier, Bryant, and Payne furnaces.
18-inch universal thermocouple for gas furnaces and water heaters. Stainless steel with universal adapter fittings. Fits most standing-pilot gas appliances.
Air-proving (draft) pressure switch used on Goodman/Amana gas furnaces. It senses negative pressure produced by the inducer blower and closes to allow the ignition sequence to proceed, keeping the burner from firing if venting is blocked or the inducer is not moving air.
High-temperature limit switch for Goodman/Amana equipment, recorded as a disc-type switch with a deep back and an L120 degree F opening point.
Supco SHL522 high limit switch, 7-inch insertion, opens at 160°F, closes at 140°F. Auto reset. Crosses to Goodman B1370908/B13709-08. Direct Goodman replacement.
Snap-disc furnace high-limit switch from the DL series; the number is the opening (cut-out) temperature in degrees F. It is a safety device that breaks the heating circuit when the plenum overheats, and a limit that keeps tripping points at restricted airflow or a failed blower rather than at the switch.
Universal replacement high-limit control from SUPCO’s CAMSTAT L59 series, with a 7 in bimetal element extension.
24V DPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Double-pole single-throw configuration. Different timing than 42-23116-06.
Supco SHL513 high limit switch, 3-inch insertion, opens at 170°F, closes at 130°F. Auto reset. Crosses to Carrier HH12ZB170. Universal furnace fit.
Universal blower-door interlock switch. Mounted at the blower compartment door, its plunger keeps the circuit made only while the panel is in place, so pulling the door de-energizes the furnace or air handler.
Supco SLS180 auto reset micro limit switch, opens at 180°F, closes at 140°F. Crosses to Nordyne 626563 and 626614. Universal fit for furnaces and heaters.
Rheem 42-22692-06 furnace door safety switch. SPST normally open, push-button style. Shuts off the furnace when the access panel is removed. Also fits York.
Rheem FSC5002U pan-mount float switch. Mounts directly to the drain pan with a magnetic float trigger. Shuts off your AC if the pan fills up. Simple and reliable.
Supco SHL508 high limit switch, 3-inch insertion, opens at 190°F, closes at 170°F. Auto reset. Crosses to Carrier HH12ZB190 and Trane SWT01259.
Rheem 62-23543-01 flame sensor replacement. Fits Rheem and Ruud furnace models including RGPH and UGPH series. Aftermarket direct fit, listed as FLS301.