SR1406-1W – SUPPLY REGISTER (14″ x 6″, 1-WAY, ADJUSTABLE)
14″W x 6″T 1-way supply register with adjustable vertical blades. Steel, white finish. Built-in damper to control airflow. Wall or ceiling mount.
This is where you can browse products in this store.
Showing 1–48 of 276 results

14″W x 6″T 1-way supply register with adjustable vertical blades. Steel, white finish. Built-in damper to control airflow. Wall or ceiling mount.

Rex Rack filter rack, 16×25. Mounts between ductwork and your air handler or furnace for horizontal installations. Holds a standard 16×25 filter. Built-in duct flange.

16″W x 25″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

Lennox cabinet corner post for air conditioner and heat pump outdoor units, 36 in. tall in a quartz gray finish.

8″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.

Honeywell F100F2020/U media air cleaner, 20×20. MERV 11 rated, captures particles down to 0.3 microns. 1,400 CFM capacity. Whole-house filtration upgrade.

24″ x 24″ return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

4-inch x 36-inch solid Type B gas vent pipe. Double-wall with aluminum inner liner and galvanized outer. ECCO Manufacturing 200402. Fixed 3-foot length.

5″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.

20″ x 20″ return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

Galvanized duct reducer, 6″ to 5″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.

EAFHG1425-2 filter base for gas furnaces, 14×25 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.

16.5″ x 19.5″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to cut noise and prevent sweating.

23.5″ x 11.5″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to cut noise and prevent sweating.

30″ galvanized flex duct saddle. Supports and cradles round flex duct to prevent sagging and kinking. Simple strap design for quick installation.

14″ x 25′ insulated flex duct (R6 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.

Galvanized duct reducer, 5″ to 4″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.

7″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.

16″W x 6″T 1-way supply register with adjustable vertical blades. Steel, white finish. Built-in damper to control airflow. Wall or ceiling mount.

8″ round ceiling diffuser with 360-degree airflow. Steel with white powder coat. Mounts in 8″ round duct opening. Great for bedrooms, hallways, and offices.

24″ x 24″ drop ceiling diffuser with 3-cone design for 4-way airflow. R6 insulated back. White steel. Lays into standard T-bar ceiling grid.

14″W x 20″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

16″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.

16″W x 6″T 2-way supply register with stamped steel face. White powder coat. Built-in multi-shutter damper for airflow control. Wall or ceiling mount.

EAFHE2020-2 filter base for electric air handlers, 20×20 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.

12″ x 12″ return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

12″W x 24″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

20″W x 30″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

20″W x 14″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

30″x48″ insulated metal sheet, 26-gauge steel with 1/2″ insulation liner (R-2). Use for building or patching plenums and ductwork. Cut to size with tin snips.

DiversiTech one-piece gray heat pump riser that adds 3 in. of elevation under heat pumps, condensers and air handlers – commonly used to lift a heat pump above the snow line so condensate ice does not damage the coil.

8″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.

6″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.

12″W x 8″T 2-way supply register with stamped steel face. White powder coat. Built-in multi-shutter damper for airflow control. Wall or ceiling mount.

Return air filter grille, 25 in. wide by 14 in. tall. Combines the return grille and filter frame in one assembly so the filter is changed at the grille face instead of at the air handler.

14″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.

18 inch x 3 foot galvanized snap-lock round duct pipe. Catalog number 10318, in stock in Dallas.

EAFHE2020-6 filter base for electric air handlers, 20×20 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.

9″ x 25′ insulated flex duct (R8 fiberglass insulation). Standard residential HVAC flexible ductwork for supply air runs. Quietflex brand.

20″W x 8″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

20″W x 6″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

14″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.

Rex Rack filter rack, 20×25 with access door on the 20″ side. Mounts between ductwork and your air handler for horizontal installations. Holds a standard 20×25 filter.

10″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.

10″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.

20″W x 25″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

Top grille for a condensing unit – the fan guard that mounts over the condenser fan.

20″W x 10″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.