☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (546 reviews) | ¿Hablas español? | Get Directions

MINISPLIT ACCESSORIES

Shop mini split accessories at Open To Public HVAC Parts in Dallas. We carry line set covers, wall mounting brackets, condensate pumps, drain line kits, and installation accessories for ductless mini split systems. Compatible with all major brands — in stock for same-day pickup.

Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7  |  Sat 10–3
In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.
All
Air Distribution ▼
AIR GRILLES & REGISTERSB-VENT (DOUBLEWALL)DUCT FANDUCTINGINSULATIONSHEET METAL
Electrical Components ▼
CAPACITORCIRCUIT BREAKERCONDUITCONTACTORCONTROL BOARDFAN RELAYFUSESURGE PROTECTORTIME DELAY RELAYTRANSFORMERWIRE
Equipment & Systems ▼
CONDENSATE PUMPEQUIPMENTEQUIPMENT MOUNTMINISPLIT ACCESSORIES
Filters & Air Quality ▼
AIR FILTERCHEMICALSUV LIGHT
Furnace & Heating ▼
GAS VALVEIGNITOR - FURNACE
Motors & Blower Parts ▼
BLOWER MOTORBLOWER WHEELCONDENSER MOTORFAN BLADEINDUCER MOTORMOTOR MOUNT
Refrigeration ▼
COMPRESSORDRIER - REFRIGERANTEXPANSION VALVEPISTONREFRIGERANTREVERSING VALVESERVICE VALVESIGHTGLASS
Switches & Sensors ▼
DOOR SWITCHDRAIN SAFETY SWITCHFLAME SENSORHEAT SEQUENCERLIMIT SWITCHPRESSURE SWITCH - FURNACEPRESSURE SWITCH - REFRIGERANTTHERMAL LIMIT
Thermostats & Zone Controls ▼
THERMOSTATZONE SYSTEM
Tools & Supplies ▼
1/4" SERVICE CAPADHESIVEBRAZING CONSUMABLESCEILING ACCESS PANELCOPPERFASTENERSGAS PIPEOILPLASTIC DRAIN PANPVCSERVICE DISCONNECTTOOLS
All parts 1,617Equipment & Systems 119Filters & Air Quality 106Air Distribution 276Furnace & Heating 51Refrigeration 90Thermostats & Zone Controls 23Switches & Sensors 168Electrical Components 277Motors & Blower Parts 161Tools & Supplies 349

Showing all 18 results

  • Low StockiCool B145812025F - MINISPLIT LINE SET
    ICOOL

    B145812025F – MINISPLIT LINE SET

    SKU · B145812025F
    $177.15

    Insulated mini split line set, 25 ft, with a 1/4 in. liquid line and a 5/8 in. suction line, pre-flared with flare nuts and jacketed in 1/2 in. closed-cell insulation.

  • Out of StockCP-MWP - MINISPLIT WEDGE CONDENSATE PUMP
    EVERWELL

    CP-MWP – MINISPLIT WEDGE CONDENSATE PUMP

    SKU · CP-MWP
    $91.01

    Everwell mini-split condensate pump with wedge design for tight spaces. Quiet operation, 65-foot max lift. Made specifically for ductless mini-split installations.

  • In StockEDG-2K-20C - CONDENSER WALL MOUNT BRACKET W/ CROSSBAR (1 - 2T)
    EVERWELL

    EDG-2K-20C – CONDENSER WALL MOUNT BRACKET W/ CROSSBAR (1 – 2T)

    SKU · EDG-2K-20C
    $59.59

    1-2 ton condenser wall mount bracket with crossbar by Everwell. Galvanized steel, holds mini-split or small condenser off the ground. Includes hardware.

  • In StockF017C - CONDENSER WALL MOUNT BRACKET (1 1.5T)
    EVERWELL

    F017C – CONDENSER WALL MOUNT BRACKET (1 & 1.5T)

    SKU · F017C
    $36.12

    1-1.5 ton condenser wall mount bracket by Everwell. Heavy-duty steel with rust-resistant coating and vibration absorbers. For mini-split outdoor units.

  • In StockF019C - CONDENSER WALL MOUNT BRACKET (2 3T)
    EVERWELL

    F019C – CONDENSER WALL MOUNT BRACKET (2 & 3T)

    SKU · F019C
    $36.60

    2-3 ton condenser wall mount bracket by Everwell. Heavy-duty galvanized steel with epoxy coating and vibration absorbers. Pre-assembled with hardware.

  • Out of StockLS14381230DMSF - MINISPLIT LINE SET (FLARED, 30FT)
    GOODMAN

    LS14381230DMSF – MINISPLIT LINE SET (FLARED, 30FT)

    SKU · LS14381230DMSF
    $133.25

    30′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Longer run for installs where the condenser is far from the wall unit.

  • Low StockLS1538-14X38 - INSULATED MINISPLIT LINE SET (FLARED, 15)
    EVERWELL

    LS1538-14X38 – INSULATED MINISPLIT LINE SET (FLARED, 15′)

    SKU · ls14381215dmsf
    $96.80

    15′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Ready to install — no flaring tool needed.

  • Low StockLS2538-14X12 -MINISPLIT LINE SET (25FT, FLARED)
    EVERWELL

    LS2538-14X12 -MINISPLIT LINE SET (25FT, FLARED)

    SKU · ls14121225dmsf
    $144.10

    Mini-split line set — 25 ft, 1/4″ liquid x 1/2″ suction, pre-flared ends. Insulated suction line. Ready to install on most 9,000-12,000 BTU ductless systems.

  • Low StockLS2538-14X38 - MINISPLIT LINE SET (FLARED, 25FT)
    EVERWELL

    LS2538-14X38 – MINISPLIT LINE SET (FLARED, 25FT)

    SKU · ls14381225dmsf
    $131.55

    Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.

  • Low StockLS2538-14X58 - MINISPLIT LINE SET (FLARED, 25FT)
    EVERWELL

    LS2538-14X58 – MINISPLIT LINE SET (FLARED, 25FT)

    SKU · ls14581225dmsf
    $182.64

    Everwell 25 ft insulated twin tube mini split line set with 1/4" OD liquid tubing and 5/8" OD suction tubing.

  • In StockLS300 - LINE SET TAPE (1.88" x 180')
    SHURTAPE

    LS300 – LINE SET TAPE (1.88″ x 180′)

    SKU · 102666
    $15.82

    Shurtape LS 300 UV-resistant line set tape. Built from OPP polypropylene film with acrylic adhesive so it will not delaminate, it conforms to the curves of a line set and holds up outdoors from -35 F to 210 F. Roll size per our stock record is 1.88 in. x 180 ft.

  • In StockLSCMS - MINI SPLIT LINE SET COVER (1 1.5T, CDS-2)
    EVERWELL

    LSCMS – MINI SPLIT LINE SET COVER (1 & 1.5T, CDS-2)

    SKU · CDS-2
    $63.53

    Everwell CDS-2 mini-split line set cover for 1-1.5 ton systems. Protects refrigerant lines and wiring from weather and UV. Clean, professional look.

  • In StockLSCMS2 - MINI SPLIT LINE SET COVER (2 3T, CDS3, 4x2.75x13)
    EVERWELL

    LSCMS2 – MINI SPLIT LINE SET COVER (2 & 3T, CDS3, 4″x2.75″x13′)

    SKU · CDS-3
    $81.48

    Everwell CDS-3 mini-split line set cover for 2-3 ton systems. 4″ x 2.75″ x 13′ length. Protects refrigerant lines from weather and UV damage.

  • In StockPWT14450 - CONTROL WIRE (14/4, 50)
    SOUTHWIRE

    PWT14450 – MINISPLIT CONTROL WIRE (14/4, 50′)

    SKU · PWT14450
    $80.36

    50′ mini-split control wire, 14-gauge 4-conductor. Connects the indoor unit to the outdoor condenser for power and communication. Stranded copper.

  • In StockU-12 - FLARE UNION
    UNIVERSAL

    U-12 – FLARE UNION

    SKU · U-12
    $5.01

    1/2″ brass flare union by Everwell. Connects two flared copper lines together. Used in mini-split, refrigeration, and HVAC line set connections.

  • In StockU-14 - FLARE UNION
    UNIVERSAL

    U-14 – FLARE UNION

    SKU · U14
    $4.38

    1/4″ brass flare union by Everwell. Connects two flared copper lines together. Common for mini-split liquid lines and small refrigeration tubing.

  • In StockU-38 - FLARE UNION
    UNIVERSAL

    U-38 – FLARE UNION

    SKU · U38
    $4.88

    3/8″ brass flare union by Everwell. Connects two flared copper lines together. Common for mini-split suction lines and refrigerant tubing.

  • In StockU-58 - FLARE UNION
    UNIVERSAL

    U-58 – FLARE UNION

    SKU · U58
    $5.44

    5/8″ brass flare union by Everwell. Connects two flared copper lines together. Common for larger mini-split suction lines and AC refrigerant tubing.

Call (214) 340-9421