W51-12CJA1-02 – CONDENSER MOTOR (1/2, 1075, 15MFD)
TrueLine universal condenser fan motor, 1/2 HP, 1075 RPM single speed, 208-230 V, 48 frame, sleeve bearing, permanent split capacitor.
This is where you can browse products in this store.
Showing 1–48 of 161 results

TrueLine universal condenser fan motor, 1/2 HP, 1075 RPM single speed, 208-230 V, 48 frame, sleeve bearing, permanent split capacitor.

16″ aluminum 3-blade condenser fan blade. 23° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

Century 9722 condenser motor — 1/8 to 1/12 HP, 1075 RPM, 208-230V, 42Y frame, 5 MFD cap. Multi-HP with reversible rotation. 5″ diameter TEAO motor.

Century 4-in-1 condenser fan motor. Regal Rexnord publishes 1/8-1/15 HP, single phase, 60 Hz, 208-230 V, 1075 RPM, 1 speed, 48 frame, totally enclosed air-over.

1/3-1/6 HP 2-speed condenser motor, 825 RPM, 208-230V. Trane mounting configuration. Replaces Trane and other brand condenser fan motors.

Fasco D337 double-shaft blower motor. 1/8 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount. Fits wall heaters, fan coils, and small units.

Aftermarket inducer assembly for Goodman furnaces. 115V, 3000 RPM, 1/40 HP. Replaces B4059000S. Complete assembly with motor, wheel, housing, and gasket.

Aftermarket inducer motor for Lennox furnaces. 1/30 HP, 115V, 3000 RPM. Direct replacement for Lennox 24W95 and 31L55. Includes motor, housing, wheel, and gasket.

1/4 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Budget-friendly option for smaller furnaces and air handlers.

11″ x 9″ clockwise blower wheel with concave blades and 1/2″ bore. Cross-references Morrison BW54202. Galvanized steel construction.

Amana OEM draft inducer motor assembly. Includes motor, housing, and wheel. Replaces 20044403. Complete drop-in assembly for Amana furnaces.

1/6 HP 825 RPM condenser fan motor, 208-230V, 48-frame, 5 MFD cap required. Reversible rotation with overload protection. Fits Goodman, Trane, and more.

11″ x 10″ clockwise blower wheel with convex blades and 1/2″ bore. OEM Goodman part. Also replaces B1368000S and Carrier LA22ZA127.

Revcor hubless axial propeller fan blade: 3 blades, 18 in. diameter, 23 degree pitch, clockwise rotation.

10″ x 7″ counter-clockwise blower wheel with convex blades and 1/2″ bore. Universal aftermarket replacement. Galvanized steel construction.

Aftermarket inducer motor for Coleman/York furnaces. 1/150 HP, 115V, 3315 RPM. Direct replacement for S1-37319801821. Ball bearing motor for longer life.

OEM-style ECM motor and control module assembly used in Goodman/Amana gas furnaces and air handlers.

Aftermarket inducer assembly for Nordyne/Miller/Intertherm furnaces. 115V, 3000 RPM, 1/50 HP. Replaces 903111. Complete assembly with motor, wheel, housing, and gasket.

Genteq OEM replacement condenser fan motor, 1/10 HP, 208-230 V, single phase, 48 frame, totally enclosed air-over. Six-pole motor in the 1075-1100 RPM class.

PROTECH (Rheem/Ruud) OEM variable-speed ECM condenser fan motor, 1/3 HP, 208/230 V, 2.8 FLA, 48Y frame, ball bearing, thru-bolt mount.

18″ aluminum 4-blade condenser fan blade. 23° pitch, CCW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

Revcor R41803 condenser fan blade — 18″, 4-blade, 23° pitch, CW rotation, hubless. Cross-references Rheem 70-24281-04. Aluminum construction.

1/2″ to 5/8″ motor shaft bushing. Adapts a 1/2″ motor shaft to fit a 5/8″ bore blower wheel or pulley. Steel with keyway slot.

10″ x 10″ clockwise blower wheel with convex blades and 1/2″ bore. Direct replacement for Goodman B1368047A and Rheem RBW10215. Galvanized steel construction.

Century 9724 condenser motor — 1/4 to 1/6 HP, 1625 RPM, 208-230V, 42Y frame, 5 MFD cap. Higher-speed multi-HP motor with reversible rotation.

Goodman OEM draft inducer motor. 120V, 3000 RPM. Direct replacement part 0131G00000PS. OEM quality for Goodman and Amana furnaces.

Electronically commutated (ECM) condenser fan motor carried under the Trane/American Standard MOT- OEM part number series.

Genuine Daikin 4020638 indoor blower motor, 310 VDC / 40W, for FTXB24AXVJU ductless indoor units. Stocked in Dallas.

Revcor fixed-hub axial propeller fan blade: 3 blades, 26 in. diameter, 24 degree pitch, clockwise rotation, 1/2 in. bore, hub on the intake side.

Aftermarket inducer motor for Lennox furnaces. 120V, 3000 RPM, 1/60 HP. Replaces 85L49. Complete assembly with motor, wheel, housing, and gaskets.

Rheem AE-58384-81 screw shell motor mount kit, 4-arm. OEM replacement for mounting 48-frame blower motors in Rheem and Ruud furnaces and air handlers.

Ametherm SL32 1R030 inrush current limiter, 1 ohm / 30 A, for ECM blower motor control module repair. Part plus bench labor.

Aftermarket inducer motor assembly for Carrier furnaces. Replaces 349336-762 and 326628-762. Complete assembly with motor, housing, and wheel. Packard 66762.

Goodman B1086775SP condenser fan blade — 22″, 3-blade, 25° pitch, CCW rotation, hub on intake side. OEM replacement for Goodman and Amana condensers.

3/4 to 1/5 HP furnace blower motor, 115V, 1075 RPM, multi-speed reversible. Requires 15 MFD capacitor. Fits Trane, Carrier, and other 115V furnaces.

York OEM 1 HP double-shaft blower motor. 115V, 1100 RPM, 4-speed. Direct fit for York furnaces and air handlers. Replaces F48E34A48 and S83-536.

18″ aluminum 3-blade condenser fan blade. 27° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

Century 9723 condenser motor — 1/4 to 1/6 HP, 1075 RPM, 208-230V, 42Y frame, 7.5 MFD cap. Multi-HP with reversible rotation. 5″ diameter TEAO motor.

Packard EC Max electronically commutated direct-drive blower motor, 3/4 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.

18″ aluminum 3-blade condenser fan blade. 27° pitch, CCW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

18″ aluminum 4-blade condenser fan blade. 33° pitch, CCW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

11″ x 10″ clockwise blower wheel with concave blades and 1/2″ bore. Rheem 70-20602-01 cross-reference. Also replaces Goodman B1368000S and Carrier S1-02634501000.

20″ aluminum 4-blade condenser fan blade. 27° pitch, CCW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

Packard EC Max electronically commutated direct-drive blower motor, 1 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.

9″ x 8″ clockwise blower wheel with convex blades and 1/2″ bore. OEM Goodman part number B1368036S. Also cross-references Morrison BW33002.

10″ x 6″ clockwise blower wheel with convex blades and 1/2″ bore. OEM Goodman part. Replaces Carrier LA22RA101 and Lennox WHL00740.

Carrier OEM inducer motor. 115V, 3000 RPM. Replaces 1186529. Genuine Carrier HC21ZS122 for Carrier, Bryant, and Payne furnaces. Motor only.

22″ aluminum 3-blade condenser fan blade. 33° pitch, CCW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.