Furnace & Heating

Keep your furnace heating reliably with parts from our Dallas HVAC supply store. We stock gas valves, hot surface ignitors, flame sensors, limit switches, heat exchangers, pilot assemblies, and inducer motors. These are the components that fail most often when your heat stops working.Our technicians can help you diagnose the issue and find the right replacement. Check out our furnace repair tutorials for guidance on common heating repairs. Open to homeowners and contractors in Dallas-Fort Worth — no special license required.

All parts are in-store only — no shipping. Walk in with your old part or your furnace’s model number and get your heat back the same day.

Need help finding the right part?

We test parts at the counter and match the right replacement. Walk in or call ahead.

☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7 | Sat 10–3

In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.

All parts 1,617 Equipment & Systems 119 Filters & Air Quality 106 Air Distribution 276 Furnace & Heating 51 Refrigeration 90 Thermostats & Zone Controls 23 Switches & Sensors 168 Electrical Components 277 Motors & Blower Parts 161 Tools & Supplies 349

REFINEIGNITOR - FURNACE 28 GAS VALVE 23

Showing 1–48 of 51 results

In Stock
SUPCO
0130F00008 – IGNITOR (GOODMAN, AFTERMARKET, DIRECT, SSN084KS)
SKU · SSN084KS
$63.21
Silicon nitride ignitor for Goodman/Amana furnaces. 120V. Replaces 0130F00008. Direct replacement — no modification needed.
Low Stock
SUPCO
19W61 – IGNITOR (95V, LENNOX, AFTERMARKET, DIRECT, SSN21)
SKU · 75M21
$60.99
Silicon nitride ignitor for Lennox furnaces. 95V. Replaces 19W61. Direct replacement SSN21 — no modification needed.
In Stock
ROBERTSHAW
20165703S – IGNITOR (GOODMAN, AFTERMARKET, DIRECT, 41-602)
SKU · 41-602
$58.50
Silicon nitride ignitor for Goodman/Amana furnaces. Replaces 20165703S. Direct fit for GMS80703AN, GMS80805CN, and similar 80% models.
In Stock
UNIVERSAL
332505-751 – IGNITOR (CARRIER, AFTERMARKET, DIRECT, SSN086KS)
SKU · LH33ZG001
$63.21
Silicon nitride ignitor for Carrier/Bryant furnaces. 120V. Replaces 332505-751 and LH33ZG001. Direct replacement SSN086KS.
In Stock
WHITE-RODGERS
36C03-300 – FURNACE GAS VALVE (STANDING, FAST, 1/2″ x 3/4″)
SKU · 36C03-300
$164.37
White-Rodgers 36C03-300 standing pilot gas valve. Fast-opening, 1/2″ x 3/4″ NPT. Natural or LP gas with adjustable regulator. For older standing pilot furnaces.
Low Stock
WHITE-RODGERS
36C03-333 – GAS VALVE (STANDING, FAST, 1/2, SIDE TAP)
SKU · 36C03-333
$173.48
White-Rodgers 36C03-333 standing pilot gas valve, 24V, fast opening, 1/2 in x 3/4 in with side taps. Replaces Honeywell VR8200A2744 and Robertshaw 700-402.
Low Stock
WHITE-RODGERS
36C03-433 – FURNACE GAS VALVE (STANDING, FAST, 3/4″)
SKU · 36C03-433
$208.13
White-Rodgers 36C03-433 standing pilot gas valve. Fast-opening, 3/4″ x 3/4″ NPT. Natural or LP gas with adjustable regulator. For larger standing pilot furnaces.
In Stock
WHITE-RODGERS
36G22-254 – FURNACE GAS VALVE (1/2″ x 1/2″, 1-STAGE, FAST OPEN)
SKU · B1282628S
$108.83
Aftermarket 36G22-254 single-stage gas valve. Fast-opening, 1/2″ x 1/2″ NPT, 24 VAC. Direct replacement for Honeywell 624775R at a lower price. Huge cross-reference list.
Low Stock
WHITE-RODGERS
36J24-214 – FURNACE GAS VALVE (1/2″ x 1/2″, 1-STAGE, SLOW OPEN)
SKU · 36J24-214
$150.94
White-Rodgers 36J24-214 single-stage gas valve. Slow-opening, 1/2″ x 1/2″ NPT, 24 VAC. Massive cross-reference list covering most major furnace brands.
Low Stock
WHITE-RODGERS
36J54-214 – FURNACE GAS VALVE (1/2″ x 1/2″, 2-STAGE, FAST OPEN)
SKU · 36J54-214
$197.48
White-Rodgers 36J54-214 two-stage gas valve. Fast-opening, 1/2″ x 1/2″ NPT, 24 VAC. Major cross-reference covering Carrier, Goodman, Lennox, Trane, and more.
Low Stock
WHITE-RODGERS
36J55-214 – FURNACE GAS VALVE (1/2″ x 1/2″, 2-STAGE, SLOW OPEN)
SKU · 36J55-214
$210.32
White-Rodgers 36J Series two-stage, slow-opening combination gas valve for 24 VAC furnaces using hot surface ignition (HSI) or direct spark ignition (DSI). Pipe size is 1/2" x 1/2" NPT straight through with inlet and outlet pressure taps, and both an LP conversion kit and reducer bushing kit are included.
In Stock
UNIVERSAL
421-181 – IGNITOR (UNIVERSAL, 120)
SKU · 421-181
$40.42
DuraGlo universal hot surface ignitor kit, using a silicon nitride element with a universal mounting bracket and a 13 in. wire length.
In Stock
YORK
60-103901-02K – FURNACE GAS VALVE (1-STAGE, SLOW, 1/2″)
SKU · VAL09029
$109.01
Trane/American Standard VAL09029 single-stage gas valve. Slow-opening, 1/2″ NPT, 24V. OEM part number 60-103901-02. Cross-references 36J24-214.
Low Stock
RHEEM
62-24164-01 – SPARK IGNITOR (ROUND PIN, RHEEM)
SKU · 62-24164-01K
$36.64
Rheem OEM direct spark ignitor with round pin connector. Part 62-24164-01. For Rheem/Ruud furnaces with spark ignition (not hot surface).
Low Stock
RHEEM
62-24164-03 – SPARK IGNITOR (5/16″ QUICK CONNECT, RHEEM)
SKU · 62-24164-03
$37.51
Rheem OEM direct spark ignitor with 5/16″ quick connect. Part 62-24164-03. For Rheem/Ruud furnaces with spark ignition (not hot surface).
Low Stock
HONEYWELL
624775R – FURNACE GAS VALVE (1-STAGE. STANDARD, AFTERMARKET, HONEYWELL) **OFFER 36G22, IT’S CHEAPER
SKU · 624775R
$142.20
Honeywell 624775R single-stage standard-opening gas valve. 24 VAC. VR8215S series. Consider the 36G22 — it’s the same valve for less money.
Low Stock
UNIVERSAL
710-402 – GAS VALVE
SKU · 710-402
$244.69
Robertshaw 710 Series low capacity 24 volt combination gas valve, an extremely compact control built for low-capacity, limited-space applications.
Low Stock
ROBERTSHAW
710-502 – GAS VALVE
SKU · 710-502
$139.06
Robertshaw 710 Series low capacity millivolt combination gas valve for self-powered standing-pilot systems with no external electrical supply.
Low Stock
ROBERTSHAW
720-400 – GAS VALVE
SKU · 720-400
$162.09
Robertshaw 720 Series 24 volt dual (six-function) combination gas valve for standing-pilot gas heating equipment.
Low Stock
ROBERTSHAW
720-474 – GAS VALVE
SKU · 7200ercs
$307.19
Robertshaw 720 Series convertible/step-opening 24 volt dual gas valve, which Robertshaw states is specifically designed for mobile home use and is available only in a 24 volt model used with a constant (standing) pilot.
Low Stock
WHITE-RODGERS
767A-374 – IGNITOR (BOILER)
SKU · 767A-374
$45.92
White-Rodgers (Copeland) 767A-series silicon carbide hot surface ignitor, a direct OEM replacement in the Whirlpool group of the published 767A carbide lineup.
Low Stock
WHITE-RODGERS
767A-379 – IGNITOR (METAL, YORK)
SKU · 767A-379
$48.47
White-Rodgers (Copeland) 767A-series silicon carbide hot surface ignitor, a direct OEM replacement in the York group of the published 767A carbide lineup.
Low Stock
TRANE
768A-815 – HOT SURFACE IGNITOR (80V, TRANE, IGN00145)
SKU · IGN00145
$66.83
80V silicon nitride ignitor for Trane furnaces. Replaces IGN00145 and IGN00117. Part 768A-815. Direct fit for Trane 80V systems.
Low Stock
WHITE-RODGERS
768A-842 – HOT SURFACE IGNITOR (80V, AMANA, 11111701S)
SKU · 11111701S
$58.46
80V silicon nitride ignitor for Amana furnaces. Replaces 11111701S. Part 768A-842. Direct fit — check that your furnace uses 80V, not 120V.
Low Stock
WHITE-RODGERS
768A-843 – HOT SURFACE IGNITOR (80V)
SKU · 768A-143
$49.66
White-Rodgers (Copeland) 768A-series silicon nitride hot surface ignitor, published by the manufacturer as an 80 V nitride OEM direct replacement in the Thermo Products group.
Low Stock
LENNOX
768A-844 – HOT SURFACE IGNITOR (80V, LENNOX, 41K56)
SKU · 768A-844
$59.01
80V silicon nitride ignitor for Lennox furnaces. Replaces 41K56. Part 768A-844. Direct fit — check that your furnace uses 80V, not 120V.
In Stock
TRANE
768A-845 – HOT SURFACE IGNITOR (80V, TRANE, B340970P01)
SKU · B340970P01
$58.88
80V silicon nitride ignitor for Trane furnaces. Replaces B340970P01. Part 768A-845. Direct fit for Trane 80V systems.
Low Stock
ROBERTSHAW
79126 – PILOT TUBING (1/4″ x 5′)
SKU · 79126
$23.72
1/4″ OD aluminum pilot burner tubing, 5 feet long. Compression fittings on both ends. For natural gas or propane pilot lines. Bendable by hand.
Low Stock
NORTEK
903110 – HOT SURFACE IGNITOR (NORTEK)
SKU · 903110
$79.95
Nortek OEM hot surface ignitor. Silicon nitride. Replaces 903110, 903110A, and 903110B. Fits Nordyne, Miller, and Intertherm furnaces.
Low Stock
NORDYNE
903758 – IGNITOR (NORTEK, AFTERMARKET, DIRECT, SN109KX)
SKU · 903758
$44.13
Silicon nitride ignitor for Nordyne/Miller/Intertherm G3-G6 furnaces. 120V. Replaces 903758. Direct fit — no modification needed.
Low Stock
CARRIER
EF32CW210 – FURNACE GAS VALVE (OEM, DIRECT, 1176929)
SKU · 1176929
$211.37
OEM Carrier/Bryant/Payne gas valve. EF32CW210 direct ignition, 24V, natural gas, 3.5″ WC, 1/2″ NPT. Replaces EF32CW206 and 36G24-618.
Low Stock
CARRIER
EF34CW246 – GAS VALVE
SKU · 36H33-412
$194.77
Carrier / Bryant OEM furnace gas valve assembly. Carrier does not publish an open spec sheet for this valve number, so voltage, regulated pressure and pipe size are not stated here – check them against the valve you are replacing before installing.
In Stock
PROTECH
FP-15 – LP CONVERSION KIT
SKU · FP-15
$107.07
Protech (Rheem/Ruud) LP conversion kit, listed by the Rheem factory parts catalog as "Conversion Kit – LP". Converts a natural gas appliance to propane.
Low Stock
AMANA
IG401 – HOT SURFACE IGNITOR (AMANA)
SKU · 41-401
$37.66
Supco IG401 hot surface ignitor for Amana furnaces. Silicon carbide. Direct replacement for 767A-369 and D9918202A.
In Stock
CARRIER
IG409 – HOT SURFACE IGNITOR (CARRIER)
SKU · 767A-370
$37.66
Supco IG409 hot surface ignitor for Carrier furnaces. Silicon carbide. Direct replacement for 767A-370 and LH33ZS004.
In Stock
RHEEM
IG418 – HOT SURFACE IGNITOR (GOODMAN, TRANE, RHEEM)
SKU · 767A-372
$37.66
Supco IG418 hot surface ignitor for Goodman, Trane, and Rheem furnaces. Silicon carbide. Replaces B1401015 and 767A-372.
In Stock
PACKARD
IG80V – HOT SURFACE IGNITOR (80V, UNIVERSAL)
SKU · IG80V
$71.43
Universal 80V hot surface ignitor with silicon nitride element. Fits most 80V furnaces across Goodman, Trane, Rheem, Lennox, and more. Includes multiple brackets and spacers.
In Stock
SUPCO
IGN00152 – HOT SURFACE IGNITOR (TRANE, AFTERMARKET, DIRECT, SSN087KS)
SKU · IGN0152
$63.21
Silicon nitride ignitor for Trane/American Standard furnaces. 120V. Replaces IGN00152 and IGN00146. Direct replacement SSN087KS.
Low Stock
SUPCO
KIT03033 – IGNITOR (TRANE, AFTERMARKET, DIRECT, SKIT03033)
SKU · SKIT3033
$56.38
Supco SKIT3033 hot surface ignitor for Trane furnaces. Silicon carbide. Direct replacement for Trane KIT03033.
Low Stock
WHITE-RODGERS
S1-254523100 – IGNITOR (YORK, AFTERMARKET, DIRECT, 789A-956A1)
SKU · 789A-956A1
$56.50
Silicon nitride ignitor for York furnaces. 120V. Replaces S1-254523100. White-Rodgers 789A-956A1 direct replacement — no modification needed.
Low Stock
SUPCO
SIG102 – HOT SURFACE IGNITOR (SPIRAL, UNIVERSAL)
SKU · SIG102
$51.38
Supco SIG102 universal spiral hot surface ignitor. Silicon carbide, fast heat-up. Fits a wide range of furnaces with the included mounting hardware.
Low Stock
SUPCO
SIG104 – HOT SURFACE IGNITOR (SPIRAL, UNIVERSAL)
SKU · IG104
$37.94
Supco SIG104 universal spiral hot surface ignitor. Silicon carbide, fast heat-up. Different mounting style than SIG102 — check your bracket before buying.
Low Stock
SUPCO
SIG1100 – HOT SURFACE IGNITOR (SPIRAL, UNIVERSAL)
SKU · SIG1100
$42.94
Supco SIG1100 universal round silicon carbide ignitor kit. Replaces a wide range of OEM furnace and boiler ignitors. Fast heat-up, durable construction.
In Stock
SUPCO
SSN2000 – UNIVERSAL NITRIDE HOT SURFACE IGNITOR (120V)
SKU · SSN2000
$48.21
Supco SSN2000 universal 120V silicon nitride ignitor. Replaces hundreds of OEM ignitor models. Includes mounting hardware for a wide range of furnace brands.
In Stock
HONEYWELL
SSN24 – HOT SURFACE IGNITOR & FLAME SENSOR (HONEYWELL SMART VALVE)
SKU · SSN24
$53.21
Supco SSN24 hot surface ignitor and flame sensor combo. 24 VAC. Direct replacement for Honeywell Q3400A1024 Smart Valve systems.
In Stock
YORK
VAL09030 – FURNACE GAS VALVE (2-STAGE, FAST, 1/2″)
SKU · VAL09030
$166.89
Trane/American Standard VAL09030 two-stage gas valve. Fast-opening, 1/2″ NPT, 24V. Replaces VAL08027, VAL06376. Cross-references 36J54-214.
Low Stock
HONEYWELL
VR8200A2132 – FURNACE GAS VALVE (STANDING, STANDARD)
SKU · VR8200A2132
$194.21
Honeywell VR8200A2132 standing pilot gas valve. Standard-opening, 24V, single-stage. Replaces VR8200A2116. Also fits Goodman B1282602.
Low Stock
HONEYWELL
VR8200H1251 – FURNACE GAS VALVE (STANDING, SLOW)
SKU · VR8200H1251
$236.99
Honeywell VR8200H1251 standing pilot gas valve. Slow-opening, 24V, 1/2″ NPT connections. Replaces VR8200H1012. For older standing pilot furnaces.

Showing 48 of 51 parts

Store Hours

Contact Us