SPP10E – HARD START KIT (3.5-5 TON)
Supco SPP10E E-Series hard start kit for 3.5-5 ton compressors. Electronic relay built for larger systems. More reliable than mechanical relay kits.
This is where you can browse products in this store.
Showing 1–48 of 277 results

Supco SPP10E E-Series hard start kit for 3.5-5 ton compressors. Electronic relay built for larger systems. More reliable than mechanical relay kits.

Carrier HK61EA010 fan control board. OEM replacement for Carrier, Bryant, and Payne air handlers. Replaces part numbers HK61EA002 and HK61EA006. Also cross-references 1172975.

Carrier HK32EA007 defrost control board for heat pumps. Manages defrost cycles to prevent coil freezing. Replaces HK32EA001. OEM Carrier/Bryant/Payne.

10+10 MFD 370V dual run capacitor. Oval shape. Powers two motors — common in heat pumps and package units where two small motors need separate capacitors.

R40403-003 integrated furnace control board (ST9120 series). Replaces older ST9120A/B/C/G models. Controls blower, inducer, and ignition timing.

3/4″ liquid-tight non-metallic conduit, sold by the foot (100′ per roll). Flexible PVC for protecting AC wiring outdoors. Moisture and UV resistant.

One-shot thermal fuse link – backup overheat protection in electric furnaces and air handlers.

Ceramic temperature fuse link (elbow), opens at 257°F (125°C). 15 Amp. Ceramic body with 90° elbow terminal orientation for tight-fit installations.

Ceramic temperature fuse link (elbow), opens at 333°F (167°C). 15 Amp. Ceramic body with 90° elbow terminal orientation for tight-fit installations.

Turbo 200 Mini universal capacitor — adjustable from 2.5 to 15 MFD at 370/440V. Compact replacement for small single run fan motor capacitors.

Nordyne 903915A control board. OEM replacement for Nordyne gas furnaces. Also sold under part number 624643. Manages ignition, blower, and safety functions.

50+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.

ICM Controls ICM2812 hot surface ignition furnace control board, published by ICM as a board-only replacement for the White-Rodgers 50M56U-843. It monitors ignition timing, trial for ignition, system switches, flame sensing and lockout.

Honeywell S8610U3009 universal gas ignition control module (ICM2918). Replaces dozens of OEM ignition modules across Honeywell, Carrier, Goodman, and more.

70+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly Supco replacement for residential AC.

Honeywell/Resideo S9200U1000 universal hot surface ignition integrated furnace control for single-stage gas heating and cooling appliances.

ICM291 direct spark ignition control board. Aftermarket replacement for Carrier LH33WP003. Used in Carrier rooftop units and furnaces to control the ignition sequence.

Rheem 62-25338-01 OEM control board for gas furnaces with direct spark ignition. Manages ignition, flame sensing, and blower operations in Rheem/Ruud systems.

35+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.

15 MFD 440V oval run capacitor. Powers a single motor — usually the condenser fan. Budget-friendly TrueLine replacement for any 15 MFD oval cap.

Copeland compressor wiring harness, 10 AWG, 6-foot lead. Molded plug connects to the compressor terminals. Rheem OEM part 45-100834-80.

50M56U-801 aftermarket control board for Lennox single-stage furnaces. Replaces 103085 series, 100973 series, and many Lennox/Ducane/Armstrong boards.

MuniCap200 universal capacitor — adjustable from 2.5 to 67.5 MFD at 370/440V. Replaces 200+ single and dual run cap combinations. Great service truck cap.

216-259 MFD 330V start capacitor with bleed resistor. Gives the compressor an extra boost on startup. Resistor is built in — no separate wiring needed.

Bristol/Danfoss compressor wiring harness. Molded plug connects to the compressor terminals. Rheem OEM part 45-102303-01.

Carrier HK42FZ086 control board (OEM part 1190595). Microprocessor-based for Carrier, Bryant, Payne furnaces. Fits PG80ESA and 58SC series models.

Flag terminal – a right-angle female quick-disconnect used where there is no room for a straight terminal, common on compressor and hermetic header connections.

Rheem/Ruud ProTech genuine OEM potential start relay used with a start capacitor to boost single-phase compressor starting torque and drop the capacitor out of the circuit once the motor is up to speed.

Goodman 0259M00005 gas valve adapter harness. Adapts Honeywell-style furnace wiring to the White-Rodgers 0151M00027S two-stage valve.

Goodman/Amana OEM direct spark ignition control board used to sequence the inducer, gas valve, spark ignitor, flame sense and blower.

25 MFD 440V round run capacitor. Powers a single motor — compressor or fan. American-made by Titan HD with 60,000-hour rated life.

Nordyne / Intertherm / Miller OEM furnace relay. Nordyne publishes no public specification sheet for this part number, so coil voltage, contact configuration and contact rating are not stated here – read the relay body markings before wiring.

Defrost control board for Carrier, Bryant and Payne heat pumps, recorded internally as 1185790. The board times and terminates the defrost cycle, switching the reversing valve and cycling the outdoor fan based on the defrost thermostat and accumulated run time.

60 MFD 440V round run capacitor. Powers a single motor — compressor or fan. American-made by Titan HD with 60,000-hour rated life.

40+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.

30+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.

Goodman 0130M00129 ice cube relay – a Tyco / Potter & Brumfield KU-91018 with a 24 V coil, industrial rated, 1/10 HP at 120 VAC and 5 A at 240 VAC.

ICM Controls 3-phase line voltage monitor that continuously watches a 180-600 VAC three-phase line for phase loss and phase reversal, with unbalance monitored as a percentage of input voltage.

Type 184 switching fan relay with a 208/240 VAC coil and SPNO/SPNC contacts, 25 A resistive. Packard PR384. Replaces Lennox 104774-01 / 15D60.

TD73 time delay relay, delay-on-break. Adjustable 6 seconds to 5 minutes, 19-250 VAC/VDC. Keeps the fan running after the compressor shuts off to extract residual cooling.

Temperature fuse link, opens at 228°F (109°C). 15 Amp rated. One-time-use thermal safety device — if it’s blown, the system overheated and needs the fuse link replaced.

60+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.

Trueline 75 VA control transformer with a multi-tap primary of 120, 208, 240 and 480 VAC and a 24 VAC secondary, supplied pre-wired with a built-in fuse and a foot mounting bracket.

York S1-03101264002 control board for electric furnaces in mobile homes. OEM replacement — also listed as S1-03101264003 and 334533. Controls fan and electric heat.

Supco SPP8E E-Series hard start kit for 1-5 ton compressors. Electronic relay covers the widest tonnage range. The go-to universal hard start.

Carrier 325878-751 control board (50M56U-751 aftermarket). Fits 58STA and 58ZAV series Carrier furnaces. Manages gas valve, ignition, and blower operations.

White-Rodgers 50C51-707 two-stage integrated furnace control, a direct OEM replacement for the Goodman and Amana PCBKF1xx series. For two-stage furnaces with a variable-speed ECM blower; works on ComfortNet communicating or legacy 24 VAC systems.

LG compressor wiring harness. Molded plug connects to the compressor terminals. Rheem OEM part 45-107231-02. Also cross-references 104162-03 and 13U63.