RP14AZ36AJ2NA – HEAT PUMP CONDENSER (3 TON, R410A, 2-STAGE, 14 SERIES, SEER2)
Rheem RP14AZ36AJ2NA heat pump condenser, 3-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.
This is where you can browse products in this store.
Showing 1–48 of 119 results

Rheem RP14AZ36AJ2NA heat pump condenser, 3-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.

Rheem RP14AZ30AJ2NA heat pump condenser, 2.5-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.

Rheem Endeavor Line RCFY cased indoor coil, listed by Rheem at 24,000 BTU/H nominal capacity on R-454B with a factory-installed TXV.

Rheem RP14AZ24AJ2NA heat pump condenser, 2-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.

1-1.5 ton condenser wall mount bracket by Everwell. Heavy-duty steel with rust-resistant coating and vibration absorbers. For mini-split outdoor units.

30″ x 30″ x 3″ plastic equipment pad for outdoor AC units and heat pumps. Blow-molded, UV-resistant, lightweight. Keeps your condenser level and off the dirt.

Rheem Endeavor Line Classic Series RA14AY outdoor condensing unit, 4 ton nominal (48,000 BTU/h), 208/230V single phase.

Rheem R801T0754A17UHSNAS gas furnace, 75,000 BTU, 80% AFUE, 17″ cabinet. Constant torque ECM blower motor with PlusOne diagnostics. Upflow/horizontal install. SEER2 compliant.

Rheem Endeavor Line Classic Series RA14AY outdoor condensing unit, 2 ton nominal (24,000 BTU/h), 208/230V single phase.

4″ x 4″ x 3/4″ rubber isolation pad by DiversiTech. Reduces vibration and noise from outdoor AC units. Suction-cup grip — no bolts needed. Sold individually.

Rheem Endeavor Line Select Series WA14AY outdoor condensing unit, 2.5 ton nominal (30,000 BTU/h), 208/230V single phase.

30′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Longer run for installs where the condenser is far from the wall unit.

Napco NP138 ceramic insulator for electric heat kits and duct heaters. 3/4 in OD, 3/8 in ID, 7/16 in wide.

Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.

Lennox / Allied Air ECB45-series electric heat section, 20 kW at 208/240V single phase, 60 Hz, with factory-installed circuit breaker protection (one 60 A and one 50 A breaker). Lennox lists it for CBK45 and CBA25 series air handlers.

50′ mini-split control wire, 14-gauge 4-conductor. Connects the indoor unit to the outdoor condenser for power and communication. Stranded copper.

Goodman 20 kW electric heat kit with built-in circuit breaker. Adds supplemental or emergency heat to Goodman/Amana air handlers. Part #HKSC20DB.

Everwell mini-split condensate pump with wedge design for tight spaces. Quiet operation, 65-foot max lift. Made specifically for ductless mini-split installations.

36″ x 36″ x 3″ plastic equipment pad for outdoor AC condensers and heat pumps. Blow-molded, UV-resistant, and lightweight. Keeps your unit level and off the ground.

Genuine Rheem/ProTech OEM plug housing (wiring harness) assembly for A2L-refrigerant air handlers.

Carrier/Bryant KFFEH accessory electric heater package, 15 kW at 240V, 230V single phase, with an internal circuit breaker.

Everwell 25 ft insulated twin tube mini split line set with 1/4" OD liquid tubing and 5/8" OD suction tubing.

15′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Ready to install — no flaring tool needed.

Goodman/Amana HKR-series field-installed electric heat kit, 15 size. Goodman’s nomenclature table lists the 15 size at 14.25 to 15.00 kW at 240V, and the trailing C denotes a single-phase kit with a factory circuit breaker.

Rheem Endeavor Line Select Series WA14AY outdoor condensing unit, 4 ton nominal (48,000 BTU/h), 208/230V single phase.

Rheem 15 kW electric heat kit for SEER2 air handlers. Part #RXBH-1724A15J-BR. Includes circuit breaker, smart plug, and legacy board adapter.

Rheem RH2TZ4821STANNJ 4-ton air handler with Constant Torque ECM motor. 21″ width, R-410A, SEER2 compliant. More efficient and quieter than PSC models.

1/2″ brass flare union by Everwell. Connects two flared copper lines together. Used in mini-split, refrigeration, and HVAC line set connections.

Lennox / Allied Air ECB45-series electric heat section, 10 kW at 208/240V single phase, 60 Hz, with factory-installed circuit breaker protection (one 60 A breaker). Lennox lists it for CBK45 and CBA25 series air handlers.

Rheem Endeavor Line Select Series WA14AY outdoor condensing unit, 1.5 ton nominal (18,000 BTU/h), 208/230V single phase.

Rheem RA14AZ18AJ1NA 1.5-ton AC condenser. 14.3 SEER2, R-410A, single-stage scroll compressor. Pre-charged refrigerant. 10-year registered warranty.

Ceramic claw insulator for electric heat elements. Holds heating coils in place and insulates them from the frame. Universal HVAC heat strip part.

Rheem Endeavor Line RH2TY multipurpose air handler, 60,000 BTU/H nominal on R-454B with a factory TXV and non-communicating controls.

Rheem RCFZ6021STAAMC evaporator coil, 5-ton, R-410A, 21″ cabinet width. Cased coil for upflow/downflow applications. SEER2 compliant.

Rheem RCFZ3717STANMC evaporator coil, 3-ton, R-410A, 17″ cabinet width. Cased coil for upflow/downflow applications. SEER2 compliant.

Rheem RA14AZ48AJ1NA 4-ton AC condenser. 14.3 SEER2, R-410A, single-stage scroll compressor. Pre-charged refrigerant. 10-year registered warranty.

Nordyne / Nortek Global HVAC H6HK-series electric heat kit with circuit breaker, recorded as 10 kW for Nordyne-built air handlers (also sold under Frigidaire, Gibson, Maytag, Tappan, Westinghouse, Philco and Kelvinator badges). Nortek publishes no public spec sheet or accessory table for this part.

Insulated mini split line set, 25 ft, with a 1/4 in. liquid line and a 5/8 in. suction line, pre-flared with flare nuts and jacketed in 1/2 in. closed-cell insulation.

Rheem RH2TZ2417STANNJ 2-ton air handler with Constant Torque ECM motor. 17″ width, R-410A, SEER2 compliant. More efficient and quieter than PSC models.

Rheem RA14AZ60AJ1NA 5-ton AC condenser. 14.3 SEER2, R-410A, single-stage scroll compressor. Pre-charged refrigerant. 10-year registered warranty.

Trane/American Standard supplementary electric heater kit for slide-in installation in the air handler heater cavity, nominally rated 15 kW.

Rheem RH1PZ4821STANNJ 4-ton air handler. 21″ width, R-410A compatible, PSC motor, SEER2 compliant. Pairs with Rheem RA14AZ48 condenser for a complete system.

Carrier/Bryant KFFEH accessory electric heater package, 10 kW at 240V, 230V single phase, with an internal circuit breaker.

Rheem RP14AZ60AJ2NA heat pump condenser, 5-ton, R-410A, 14.3 SEER2, two-stage scroll compressor. Swept Wing fan for quiet operation. 10-year registered warranty.

Ceramic insulator for electric heat kits, sold by the piece. Bring the old one in and we will match it at the counter.

Goodman 10 kW electric heat kit with built-in circuit breaker. Part #HKSC10XC / HKTSD10X1. Supplemental or emergency heat for Goodman/Amana air handlers.

Rheem AS-58386-92 sheath heater element — 3,500W at 240V / 4,700W at 277V. Replacement heating element for Rheem electric furnaces and air handlers.

36,000 BTU class single-zone ductless mini split heat pump system from the Everwell MKTH-17 series, rated 35,000 BTU/h cooling and 35,400 BTU/h heating.