IG80V – HOT SURFACE IGNITOR (80V, UNIVERSAL)
Universal 80V hot surface ignitor with silicon nitride element. Fits most 80V furnaces across Goodman, Trane, Rheem, Lennox, and more. Includes multiple brackets and spacers.
This is where you can browse products in this store.
Showing 1–48 of 51 results

Universal 80V hot surface ignitor with silicon nitride element. Fits most 80V furnaces across Goodman, Trane, Rheem, Lennox, and more. Includes multiple brackets and spacers.

Trane/American Standard VAL09029 single-stage gas valve. Slow-opening, 1/2″ NPT, 24V. OEM part number 60-103901-02. Cross-references 36J24-214.

Honeywell VR8200H1251 standing pilot gas valve. Slow-opening, 24V, 1/2″ NPT connections. Replaces VR8200H1012. For older standing pilot furnaces.

White-Rodgers (Copeland) 767A-series silicon carbide hot surface ignitor, a direct OEM replacement in the Whirlpool group of the published 767A carbide lineup.

80V silicon nitride ignitor for Trane furnaces. Replaces IGN00145 and IGN00117. Part 768A-815. Direct fit for Trane 80V systems.

Supco IG409 hot surface ignitor for Carrier furnaces. Silicon carbide. Direct replacement for 767A-370 and LH33ZS004.

White-Rodgers (Copeland) 768A-series silicon nitride hot surface ignitor, published by the manufacturer as an 80 V nitride OEM direct replacement in the Thermo Products group.

Supco SIG102 universal spiral hot surface ignitor. Silicon carbide, fast heat-up. Fits a wide range of furnaces with the included mounting hardware.

Honeywell 624775R single-stage standard-opening gas valve. 24 VAC. VR8215S series. Consider the 36G22 — it’s the same valve for less money.

Supco IG401 hot surface ignitor for Amana furnaces. Silicon carbide. Direct replacement for 767A-369 and D9918202A.

OEM Carrier/Bryant/Payne gas valve. EF32CW210 direct ignition, 24V, natural gas, 3.5″ WC, 1/2″ NPT. Replaces EF32CW206 and 36G24-618.

Aftermarket 36G22-254 single-stage gas valve. Fast-opening, 1/2″ x 1/2″ NPT, 24 VAC. Direct replacement for Honeywell 624775R at a lower price. Huge cross-reference list.

80V silicon nitride ignitor for Trane furnaces. Replaces B340970P01. Part 768A-845. Direct fit for Trane 80V systems.

Silicon nitride ignitor for Trane/American Standard furnaces. 120V. Replaces IGN00152 and IGN00146. Direct replacement SSN087KS.

Trane/American Standard VAL09030 two-stage gas valve. Fast-opening, 1/2″ NPT, 24V. Replaces VAL08027, VAL06376. Cross-references 36J54-214.

White-Rodgers 36J54-214 two-stage gas valve. Fast-opening, 1/2″ x 1/2″ NPT, 24 VAC. Major cross-reference covering Carrier, Goodman, Lennox, Trane, and more.

White-Rodgers 36C03-333 standing pilot gas valve, 24V, fast opening, 1/2 in x 3/4 in with side taps. Replaces Honeywell VR8200A2744 and Robertshaw 700-402.

White-Rodgers 36J Series two-stage, slow-opening combination gas valve for 24 VAC furnaces using hot surface ignition (HSI) or direct spark ignition (DSI). Pipe size is 1/2" x 1/2" NPT straight through with inlet and outlet pressure taps, and both an LP conversion kit and reducer bushing kit are included.

Robertshaw 720 Series convertible/step-opening 24 volt dual gas valve, which Robertshaw states is specifically designed for mobile home use and is available only in a 24 volt model used with a constant (standing) pilot.

80V silicon nitride ignitor for Amana furnaces. Replaces 11111701S. Part 768A-842. Direct fit — check that your furnace uses 80V, not 120V.

Robertshaw 710 Series low capacity 24 volt combination gas valve, an extremely compact control built for low-capacity, limited-space applications.

Rheem OEM direct spark ignitor with 5/16″ quick connect. Part 62-24164-03. For Rheem/Ruud furnaces with spark ignition (not hot surface).

Nortek OEM hot surface ignitor. Silicon nitride. Replaces 903110, 903110A, and 903110B. Fits Nordyne, Miller, and Intertherm furnaces.

Carrier / Bryant OEM furnace gas valve assembly. Carrier does not publish an open spec sheet for this valve number, so voltage, regulated pressure and pipe size are not stated here – check them against the valve you are replacing before installing.

Robertshaw 720 Series 24 volt dual (six-function) combination gas valve for standing-pilot gas heating equipment.

White-Rodgers (Copeland) 767A-series silicon carbide hot surface ignitor, a direct OEM replacement in the York group of the published 767A carbide lineup.

Silicon nitride ignitor for Goodman/Amana furnaces. Replaces 20165703S. Direct fit for GMS80703AN, GMS80805CN, and similar 80% models.

Silicon nitride ignitor for Nordyne/Miller/Intertherm G3-G6 furnaces. 120V. Replaces 903758. Direct fit — no modification needed.

Supco SKIT3033 hot surface ignitor for Trane furnaces. Silicon carbide. Direct replacement for Trane KIT03033.

White-Rodgers 36C03-433 standing pilot gas valve. Fast-opening, 3/4″ x 3/4″ NPT. Natural or LP gas with adjustable regulator. For larger standing pilot furnaces.

Rheem OEM direct spark ignitor with round pin connector. Part 62-24164-01. For Rheem/Ruud furnaces with spark ignition (not hot surface).

Supco SIG104 universal spiral hot surface ignitor. Silicon carbide, fast heat-up. Different mounting style than SIG102 — check your bracket before buying.

Supco SIG1100 universal round silicon carbide ignitor kit. Replaces a wide range of OEM furnace and boiler ignitors. Fast heat-up, durable construction.

1/4″ OD aluminum pilot burner tubing, 5 feet long. Compression fittings on both ends. For natural gas or propane pilot lines. Bendable by hand.

Protech (Rheem/Ruud) LP conversion kit, listed by the Rheem factory parts catalog as "Conversion Kit – LP". Converts a natural gas appliance to propane.

Silicon nitride ignitor for York furnaces. 120V. Replaces S1-254523100. White-Rodgers 789A-956A1 direct replacement — no modification needed.

Honeywell VR8345M4302 universal electronic ignition gas valve. Up to 300 CFH natural gas capacity. 24 VAC. Replaces Rheem 903596 and VR8205R2091.

Silicon nitride ignitor for Goodman/Amana furnaces. 120V. Replaces 0130F00008. Direct replacement — no modification needed.

Silicon nitride ignitor for Carrier/Bryant furnaces. 120V. Replaces 332505-751 and LH33ZG001. Direct replacement SSN086KS.

Resideo VR8345K4809 universal electronic ignition gas valve. Works with intermittent pilot, hot surface, or direct spark ignition. 24 VAC.

White-Rodgers 36C03-300 standing pilot gas valve. Fast-opening, 1/2″ x 3/4″ NPT. Natural or LP gas with adjustable regulator. For older standing pilot furnaces.

Honeywell VR8200A2132 standing pilot gas valve. Standard-opening, 24V, single-stage. Replaces VR8200A2116. Also fits Goodman B1282602.

Silicon nitride ignitor for Lennox furnaces. 95V. Replaces 19W61. Direct replacement SSN21 — no modification needed.

Robertshaw 710 Series low capacity millivolt combination gas valve for self-powered standing-pilot systems with no external electrical supply.

Honeywell VR8345Q4563 two-stage gas valve with 3/4″ x 3/4″ connections and reducer bushings. Universal electronic ignition. 24 VAC. Major cross-reference list.

80V silicon nitride ignitor for Lennox furnaces. Replaces 41K56. Part 768A-844. Direct fit — check that your furnace uses 80V, not 120V.

Supco IG418 hot surface ignitor for Goodman, Trane, and Rheem furnaces. Silicon carbide. Replaces B1401015 and 767A-372.

Supco SSN2000 universal 120V silicon nitride ignitor. Replaces hundreds of OEM ignitor models. Includes mounting hardware for a wide range of furnace brands.