☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (512 reviews) | ¿Hablas español? | Get Directions

TOOLS

Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7  |  Sat 10–3
In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.
All
Air Distribution ▼
AIR GRILLES & REGISTERSB-VENT (DOUBLEWALL)DUCT FANDUCTINGINSULATIONSHEET METAL
Electrical Components ▼
CAPACITORCIRCUIT BREAKERCONDUITCONTACTORCONTROL BOARDFAN RELAYFUSESURGE PROTECTORTIME DELAY RELAYTRANSFORMERWIRE
Equipment & Systems ▼
CONDENSATE PUMPEQUIPMENTEQUIPMENT MOUNTMINISPLIT ACCESSORIES
Filters & Air Quality ▼
AIR FILTERCHEMICALSUV LIGHT
Furnace & Heating ▼
GAS VALVEIGNITOR - FURNACE
Motors & Blower Parts ▼
BLOWER MOTORBLOWER WHEELCONDENSER MOTORFAN BLADEINDUCER MOTORMOTOR MOUNT
Refrigeration ▼
COMPRESSORDRIER - REFRIGERANTEXPANSION VALVEPISTONREFRIGERANTREVERSING VALVESERVICE VALVESIGHTGLASS
Switches & Sensors ▼
DOOR SWITCHDRAIN SAFETY SWITCHFLAME SENSORHEAT SEQUENCERLIMIT SWITCHPRESSURE SWITCH - FURNACEPRESSURE SWITCH - REFRIGERANTTHERMAL LIMIT
Thermostats & Zone Controls ▼
THERMOSTATZONE SYSTEM
Tools & Supplies ▼
1/4" SERVICE CAPADHESIVEBRAZING CONSUMABLESCEILING ACCESS PANELCOPPERFASTERNERGAS PIPEOILPLASTIC DRAIN PANPVCSERVICE DISCONNECTSUPPLIESTOOLS
All parts 1,291Equipment & Systems 67Filters & Air Quality 83Air Distribution 259Furnace & Heating 39Refrigeration 67Thermostats & Zone Controls 17Switches & Sensors 132Electrical Components 224Motors & Blower Parts 129Tools & Supplies 276
REFINEHAND TOOLS 56REFRIGERANT 35BRAZING 23METERS 21TOOL BAGS 19KNEE PADS 7

Showing 1–48 of 164 results

  • In Stock0125 - PVC CUTTING TOOL (3/8 to 1)
    UNIVERSAL

    0125 – PVC CUTTING TOOL (3/8″ to 1″)

    SKU · 36101
    $13.19

    PVC cutting tool for 3/8″ to 1″ pipe. One-hand ratcheting design for clean cuts on condensate drain lines and small PVC pipes.

  • Low Stock0781-4240 - ACETYLENE REGULATOR
    UNIVERSAL

    0781-4240 – ACETYLENE REGULATOR

    SKU · LDPA
    $114.82

    Victor G150-15-200R acetylene regulator. Compact single-stage design for light-duty brazing and soldering. CGA200 connection fits standard acetylene tanks.

  • Low Stock0781-4241 - OXYGEN REGULATOR
    UNIVERSAL

    0781-4241 – OXYGEN REGULATOR

    SKU · 0781-4241
    $114.82

    Victor G150-60-540R oxygen regulator. Compact single-stage design for light-duty welding and brazing. CGA540 connection fits standard oxygen tanks.

  • In Stock1/8ALLEN - WRENCH
    UNIVERSAL

    1/8ALLEN – WRENCH

    SKU · WT918G
    $9.58

    Malco WT918G T-handle hex key, 1/8″ size, 9″ long. Vinyl cushion grip for torque. Alloy steel construction for HVAC service valve and setscrew work.

  • Out of Stock10006 - NEEDLE NOSE PLIER
    UNIVERSAL

    10006 – NEEDLE NOSE PLIER

    SKU · 10006
    $8.49

    6-inch needle nose pliers with serrated jaws. Reaches into tight spaces for bending wire, pulling pins, and grabbing small parts on HVAC equipment.

  • Low Stock10014 - ADJUSTABLE CHANNEL WRENCH (10)
    UNIVERSAL

    10014 – ADJUSTABLE CHANNEL WRENCH (10″)

    SKU · 560421
    $9.99

    10-inch adjustable channel wrench with precision jaws and non-slip handles. Chrome-plated for rust resistance. General-purpose HVAC and plumbing grip tool.

  • In Stock15514 - JUMPER CORD (CLAMPS TO SOCKET)
    UNIVERSAL

    15514 – JUMPER CORD (CLAMPS TO SOCKET)

    SKU · 15514
    $15.75

    Jumper cord with alligator clips on one end and a female socket on the other. Used for temporary power during HVAC and electrical diagnostics. For professional use.

  • Low Stock15660 - REFRIGERANT HOSE (3/8 HOSE, 5 LONG)
    UNIVERSAL

    15660 – REFRIGERANT HOSE (3/8″ HOSE, 5′ LONG)

    SKU · 15660
    $70.98

    Yellow Jacket 15660 heavy-duty 3/8″ charging and vacuum hose, 60″ (5 ft). 600 psi working pressure, 3000 psi burst. For larger systems and faster vacuum pulldown.

  • In Stock16569 - 6-IN-1 SCREWDRIVER
    UNIVERSAL

    16569 – 6-IN-1 SCREWDRIVER

    SKU · screwdriver
    $5.99

    6-in-1 multi-bit screwdriver with Phillips, slotted, and nut driver tips. One tool handles most HVAC panel screws and terminal connections.

  • In Stock1839046 - SERVICE HEX KEY ADAPTER
    UNIVERSAL

    1839046 – SERVICE HEX KEY ADAPTER

    SKU · 1839046
    $7.25

    Hilmor service hex key adapter for 3/16″ and 5/16″ hex valves. Makes opening liquid and suction service valves quick and easy without fumbling for Allen keys.

  • Low Stock19020 - QUICK COUPLER HOSE GASKET (1/4)
    UNIVERSAL

    19020 – QUICK COUPLER HOSE GASKET (1/4″)

    SKU · 19020
    $10.79

    Yellow Jacket 19020 quick coupler gaskets for 1/4″, 5/16″, and 1/2″ Acme hose fittings. Replacement seals to stop hose leaks. Pack of gaskets.

  • In Stock19041 - SEALRIGHT COMPLETE OVERHAUL KIT (LOW LOSS REBUILD)
    UNIVERSAL

    19041 – SEALRIGHT COMPLETE OVERHAUL KIT (LOW LOSS REBUILD)

    SKU · 19041
    $18.45

    Yellow Jacket 19041 SealRight 1/4″ complete overhaul kit. Rebuilds your low-loss quick couplers with new seals, springs, and o-rings. Cheaper than replacing the whole coupler.

  • Low Stock19109 - SEALRIGHT FITTING (STRAIGHT, 1/4, LOW LOSS)
    UNIVERSAL

    19109 – SEALRIGHT FITTING (STRAIGHT, 1/4″, LOW LOSS)

    SKU · 19109
    $21.62

    Yellow Jacket 19109 SealRight 1/4″ straight low-loss fitting. Traps refrigerant automatically when you disconnect. Male flare, straight design.

  • In Stock19209 - SEALRIGHT FITTING (ELBOW, 1/4, LOW LOSS)
    UNIVERSAL

    19209 – SEALRIGHT FITTING (ELBOW, 1/4″, LOW LOSS)

    SKU · 19209
    $21.90

    Yellow Jacket 19209 SealRight 1/4″ 90-degree low-loss fitting. Traps refrigerant automatically when you disconnect. Male flare, elbow design for tight spaces.

  • Low Stock1948778 - 6-IN-1 NUT DRIVER
    UNIVERSAL

    1948778 – 6-IN-1 NUT DRIVER

    SKU · 1948778
    $14.98

    Irwin 6-in-1 SAE nut driver. Six sizes (1/4″ to 1/2″) in one compact tool. Covers the most common nut driver sizes for HVAC sheet metal screws.

  • In Stock1948779 - EXTENDING SCREWDRIVER
    UNIVERSAL

    1948779 – EXTENDING SCREWDRIVER

    SKU · 1948779
    $12.98

    Irwin 1948779 extending screwdriver. Shaft extends from 5″ to 11″ for hard-to-reach screws. Includes 5 impact bits. Handy for HVAC equipment access panels.

  • Out of Stock21012 - SHORT RECOVERY DRIER HOSE
    UNIVERSAL

    21012 – SHORT RECOVERY DRIER HOSE

    SKU · 21012
    $22.43

    Yellow Jacket 21012 PLUS II 12-inch recovery drier hose. 1/4″ with standard flare fittings. Short hose for connecting a filter drier inline during recovery.

  • In Stock21985 - REFRIGERANT HOSE SET (3-PACK, 60 LONG, 1/4 STANDARD FITTING)
    UNIVERSAL

    21985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ STANDARD FITTING)

    SKU · 21985
    $100.97

    Yellow Jacket 21985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with standard flare fittings. Red, blue, and yellow. Double barrier construction for all refrigerants.

  • Low Stock22985 - REFRIGERANT HOSE SET (3-PACK, 60 LONG, 1/4 LOW LOSS FITTING)
    UNIVERSAL

    22985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ LOW LOSS FITTING)

    SKU · 22985
    $124.46

    Yellow Jacket 22985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with SealRight low-loss fittings. Red, blue, yellow. Traps refrigerant on disconnect.

  • Low Stock24F - METAL FOLDING TOOL
    UNIVERSAL

    24F – METAL FOLDING TOOL

    SKU · 24F
    $39.68

    Malco 24F metal folding tool, 24 inches long. Dual folding depths (3/8″ and 1″) for bending sheet metal edges. Heavy-duty steel for ductwork fabrication.

  • In Stock25006 - TINNING HAMMER (40oz)
    UNIVERSAL

    25006 – TINNING HAMMER (40oz)

    SKU · 25006
    $16.90

    40oz tinning hammer with polished striking face and wooden handle. Built for bending, seaming, and forming sheet metal ductwork in HVAC installations.

  • Low Stock25985 - REFRIGERANT HOSE SET (3-PACK, 60 LONG, 1/4 BALL VALVE FITTING)
    UNIVERSAL

    25985 – REFRIGERANT HOSE SET (3-PACK, 60″ LONG, 1/4″ BALL VALVE FITTING)

    SKU · 25985
    $186.91

    Yellow Jacket 25985 PLUS II hose set — 3 pack, 60″ long, 1/4″ with FlexFlow ball valve fittings. Red, blue, yellow. Instant shutoff at the hose end.

  • Low Stock2AM-T - ACETYLENE TORCH HANDLE (QUICK CONNECT)
    UNIVERSAL

    2AM-T – ACETYLENE TORCH HANDLE (QUICK CONNECT)

    SKU · 2AMT
    $81.96

    TurboTorch 2AM-T acetylene torch handle with quick-connect tip fitting. Extreme Swirl Technology for efficient heat distribution. The handle that most HVAC brazing tips connect to.

  • Low Stock30022 - AVIATION SNIP (STRAIGHT)
    UNIVERSAL

    30022 – AVIATION SNIP (STRAIGHT)

    SKU · 30022
    $10.99

    Straight-cut aviation snips with hardened steel blades. Cuts sheet metal, aluminum flashing, and thin steel cleanly. Ergonomic handles for all-day use.

  • In Stock30023 - AVIATION SNIP (RIGHT)
    UNIVERSAL

    30023 – AVIATION SNIP (RIGHT)

    SKU · 30023
    $9.99

    Right-cut aviation snips with hardened steel blades. Makes right-turning curves and straight cuts in sheet metal. Ergonomic non-slip handles.

  • In Stock301 - VALVE CORE REMOVAL TOOL
    UNIVERSAL

    301 – VALVE CORE REMOVAL TOOL

    SKU · 301
    $42.77

    Cliplight 301 valve core removal tool. Removes and installs Schrader valve cores without losing refrigerant charge. Seals the port while you work.

  • Low Stock30V 1# - TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
    UNIVERSAL

    30V 1# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)

    SKU · 30V 1#
    $26.54

    Victor 1-W-J torch tip for J Series light-duty torches. Good for smaller brazing and soldering jobs on thin copper. Precise flame control for detail work.

  • Low Stock30V 2# - TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
    UNIVERSAL

    30V 2# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)

    SKU · 30V 2#
    $26.54

    Victor 2-W-J torch tip for J Series light-duty torches. Mid-range tip for general brazing and soldering on copper. Controlled heat output.

  • Low Stock30V 3# - TORCH TIP (J SERIES VICTOR, LIGHT DUTY)
    UNIVERSAL

    30V 3# – TORCH TIP (J SERIES VICTOR, LIGHT DUTY)

    SKU · 30V3#
    $26.54

    Victor 3-W-J torch tip for J Series light-duty torches. Largest in the J Series — more heat for bigger copper tubing and heavier brazing jobs.

  • In Stock33003 - MINI TUBING CUTTER (1/8-7/8)
    UNIVERSAL

    33003 – MINI TUBING CUTTER (1/8-7/8)

    SKU · 330522
    $7.99

    Mini tubing cutter, 1/8″ to 7/8″ OD capacity. Small enough for tight spaces around coils and line sets. Clean cuts on copper, aluminum, and brass.

  • In Stock33004 - TUBING CUTTER (UP TO 1-1/8)
    UNIVERSAL

    33004 – TUBING CUTTER (UP TO 1-1/8″)

    SKU · 330628
    $9.99

    Tubing cutter for 1/8″ to 1-1/8″ OD tubing. High-carbon steel blade with micrometer adjuster for precise cuts on copper and aluminum refrigerant lines.

  • Low Stock33006 - TUBING CUTTER (UP TO 2½)
    UNIVERSAL

    33006 – TUBING CUTTER (UP TO 2½”)

    SKU · 33006
    $21.75

    Tubing cutter for up to 2-1/2″ OD. Quick-action ratcheting design cuts copper, aluminum, and plastic tubing. Handles large line sets and drain lines.

  • In Stock36104 - RATCHETING PVC CUTTING TOOL
    UNIVERSAL

    36104 – RATCHETING PVC CUTTING TOOL

    SKU · 36104
    $17.69

    Ratcheting PVC cutter — cuts plastic pipe and tubing up to 2″ with smooth, burr-free results. Ratchet action reduces hand strain on bigger cuts.

  • Low Stock36105 - HOLE CUTTER
    UNIVERSAL

    36105 – HOLE CUTTER

    SKU · 36105
    $47.89

    Adjustable hole cutter for sheet metal. Creates clean circular holes for ductwork, vents, and registers. Fits in a standard drill chuck.

  • Low Stock36106 - REPLACEMENT BITS FOR 36105 (5PC)
    UNIVERSAL

    36106 – REPLACEMENT BITS FOR 36105 (5PC)

    SKU · 36106
    $23.49

    5-pack replacement bits for the 36105 adjustable hole cutter. Hardened steel for clean, burr-free cuts in sheet metal ductwork.

  • In Stock36113 - DUCT KNIFE (DOUBLE SIDED - SERRATED STRAIGHT)
    UNIVERSAL

    36113 – DUCT KNIFE (DOUBLE SIDED – SERRATED & STRAIGHT)

    SKU · 36113
    $15.15

    Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.

  • Out of Stock38013 - SCREWDRIVER SET (6PC, INSULATED)
    UNIVERSAL

    38013 – SCREWDRIVER SET (6+1PC, INSULATED)

    SKU · 38013
    $15.89

    6-piece insulated screwdriver set rated to 1000V. Phillips and slotted tips with ergonomic handles. Required for safe electrical and HVAC work.

  • Out of Stock42004 - REFRIGERANT MANIFOLD GAUGES (R404A/R22/R410A, BRASS, 5 HOSE SET)
    UNIVERSAL

    42004 – REFRIGERANT MANIFOLD GAUGES (R404A/R22/R410A, BRASS, 5′ HOSE SET)

    SKU · 42004
    $175.55

    Yellow Jacket 42004 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-404A, R-22, and R-410A.

  • Out of Stock42036 - REFRIGERANT MANIFOLD GAUGES (R32/R454B/R410A, BRASS, 5 HOSE SET)
    UNIVERSAL

    42036 – REFRIGERANT MANIFOLD GAUGES (R32/R454B/R410A, BRASS, 5′ HOSE SET, A2L)

    SKU · 42036
    $200.82

    Yellow Jacket 42036 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-32, R-454B, and R-410A — ready for next-gen refrigerants.

  • Low Stock46010 - REFRIGERANT MANIFOLD GAUGES (4 VALVE, ALUMINUM, NO HOSES)
    UNIVERSAL

    46010 – REFRIGERANT MANIFOLD GAUGES (4 VALVE, ALUMINUM, NO HOSES)

    SKU · 46010
    $265.89

    Yellow Jacket 46010 BRUTE II 4-valve manifold — aluminum body, 3/8″ bore, no hoses. Full-size 3-1/8″ gauges. Faster vacuum and charging than 2-valve manifolds.

  • In Stock48-32-4803 - BIT HOLDER
    UNIVERSAL

    48-32-4803 – BIT HOLDER

    SKU · A-969-36
    $2.99

    Milwaukee 48-32-4803 magnetic bit holder. 3-inch impact-duty design locks bits tight during high-torque driving. Fits all standard 1/4″ hex shank bits.

  • In Stock49100 - REPLACEMENT CRYSTAL (3-1/8)
    UNIVERSAL

    49100 – REPLACEMENT CRYSTAL (3-1/8″)

    SKU · 49100
    $10.24

    Yellow Jacket 49100 replacement gauge crystal, 3-1/8″ (80mm). Polycarbonate. Fits BRUTE II manifolds and other 3-1/8″ dry gauges. Clear view, impact resistant.

  • Low Stock49190 - GAUGE BOOTS (3-1/8 PROTECTIVE RUBBER COVERS)
    UNIVERSAL

    49190 – GAUGE BOOTS (3-1/8″ PROTECTIVE RUBBER COVERS)

    SKU · 49190
    $27.00

    Yellow Jacket 49190 protective gauge boot set — red and blue rubber covers for 3-1/8″ manifold gauges. Cushion against drops and impacts without blocking the gauge face.

  • In Stock5/32ALLEN - WRENCH
    UNIVERSAL

    5/32ALLEN – WRENCH

    SKU · WT9532G
    $9.88

    Malco WT9532G T-handle hex key, 5/32″ size, 9″ long. Vinyl cushion grip and alloy steel. Common size for HVAC setscrews and motor mount bolts.

  • Low Stock540560 - ADJUSTABLE WRENCH (10)
    UNIVERSAL

    540560 – ADJUSTABLE WRENCH (10″)

    SKU · 540560
    $12.99

    10-inch adjustable wrench with chrome finish and precision-machined jaws. Standard all-purpose wrench for HVAC nuts, bolts, and fittings.

  • Low Stock56166 - SIDE CUTTER
    UNIVERSAL

    560166 – SIDE CUTTER

    SKU · 56166
    $7.99

    Side cutter pliers with hardened steel blades. Compact design for flush-cutting wire in tight spaces. Clean cuts on thermostat wire and control wiring.

  • In Stock660613 - WIRE STRIPPER, CRIMPER, CUTTER
    UNIVERSAL

    660613 – WIRE STRIPPER, CRIMPER, CUTTER

    SKU · W091022
    $16.98

    Multi-function wire stripper, crimper, and cutter. Auto-stripping action with Cr-Mo blades. Handles stripping, crimping, and cutting in one tool.

  • Out of Stock7126KAACH-144 - OXY/ACET TWIN HOSES (12)
    UNIVERSAL

    7126KAACH-144 – OXY/ACET TWIN HOSES (12′)

    SKU · 7126KAACH-144
    $84.92

    12-foot twin oxy-acetylene hose set, 3/16″ diameter, Grade R, 200 PSI working pressure. Standard B-fitting connections for welding and brazing setups.

Showing 48 of 164 parts
Call (214) 340-9421