This is where you can browse products in this store.
Showing 1–48 of 67 results
Supco SFL1402 safety locking valve caps, 2-pack. 1/4″ thermoplastic caps that lock onto refrigerant access valves. Meets code requirements for tamper-resistant caps.
Goodman .090″ fixed orifice piston for 5-ton systems (R-410A). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
R-410A refrigerant, 25 lb cylinder. Standard refrigerant for residential AC systems built since 2010. Higher pressure than R-22 — use only in R-410A rated equipment.
3/8″ sweat bi-flow filter drier, 16 cu. in. Works in both directions — made for heat pump systems. Removes moisture and acid. Compatible with all common refrigerants.
R-407C refrigerant, 25 lb cylinder. R-22 replacement for existing air conditioning systems. Blend of R-32, R-125, and R-134a. No oil change needed in most systems.
Goodman .082″ fixed orifice piston for 4-ton systems (R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
Supco BPV31 Bullet piercing valve for 1/4″, 5/16″, and 3/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.
Yellow Jacket 19124 left-hand thread adapter for A2L refrigerants. 1/4″ LH female flare to 1/4″ RH male flare. Required for servicing R-32 and R-454B systems.
Goodman .059″ fixed orifice piston for 2-ton R-22 / 2.5-ton R-410A systems (R-22 and R-410A). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
Nu-Calgon EasySeal 4050-11 refrigerant leak sealant with UV dye. Treats 2 to 7.5 ton systems. Works with all refrigerant types. Direct-inject installation.
Goodman .078″ fixed orifice piston for 4-ton R-410A / 3.5-ton R-22 systems (R-410A and R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
Mastercool 62010 refrigerant recovery tank, 30 lb capacity. Steel construction with Y-valve design. DOT approved. Not rated for A2L refrigerants.
LG APG025KAC scroll compressor, 2.5 ton, R-410A. Direct replacement for Copeland ZP25K5E series. Common mid-size residential AC compressor.
Goodman .074″ fixed orifice piston for 3-ton systems (R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
Goodman B1225022S reversing valve solenoid coil, 24VAC, 50/60Hz, 5/4 watt. Controls the reversing valve on Goodman/Amana heat pump systems.
Goodman B1225017 reversing valve solenoid coil, 24V, 5 watt. Controls the reversing valve on Goodman/Amana heat pump systems to switch between heating and cooling.
C&D CD2012 brass coupler. 1/4″ female flare swivel to 1/2″ male Acme with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.
C&D CD2245 brass flare caps, 6-pack. 1/4″ with neoprene O-ring seal. Replace missing or damaged caps on refrigerant service valve ports to prevent leaks.
Goodman reversing valve with 24V solenoid coil and bi-flow filter drier. 7/8″ x 1/2″ connections. Complete assembly for heat pump systems.
Goodman B1796630 / BT1369063 90-degree stub elbow fitting. Connects the piston assembly to the refrigerant line. OEM Goodman/Amana part.
Supco SF8408 Stinger line service valve. 1/8″ OD with 2″ copper tubing extension and plain cap. Braze-on access point for small refrigerant lines.
Sanhua TXVFE-3-410A-CHATLEFF expansion valve. R-410A, 3-ton capacity, 3/8″ inlet, 1/2″ outlet. Chatleff fittings on both sides. For residential AC systems.
LG ABH051KAA scroll compressor, 5 ton, R-410A. Direct replacement for Copeland ZP51K5E series. For large residential and light commercial AC systems.
Sanhua TXVFE-6-410A-CHATLEFF expansion valve. R-410A, 6-ton capacity, 3/8″ inlet, 1/2″ outlet. Chatleff fittings on both sides. For residential AC systems.
Supco SFL1410 safety locking valve caps, 10-pack. 1/4″ thermoplastic caps that lock onto refrigerant access valves. Meets code requirements for tamper-resistant caps.
C&D CD1454/2 brass fitting, 2-pack. 1/4″ female flare to 1/4″ male flare with installed valve core. Adds a Schrader core to a port that doesn’t have one.
Sanhua TXVFE-2-410A-CHATLEFF expansion valve. R-410A, 2-ton capacity, 3/8″ inlet, 1/2″ outlet. Chatleff fittings on both sides. For residential AC systems.
R-454B refrigerant, 20 lb cylinder. Low-GWP replacement for R-410A in new systems. A2L mildly flammable — requires proper handling. The future of residential AC refrigerant.
Sanhua TXVFE-2-410A-KIT expansion valve. R-410A, 2-ton capacity, 3/8″ inlet, 1/2″ outlet. Includes both Aeroquip and Chatleff fittings for flexible installation. For residential AC systems.
LG APG031KAC scroll compressor, 3 ton, R-410A. Direct replacement for Copeland ZP31K5E and ZP29LXE series. The most common residential tonnage.
Brinmar SBUHD universal-fit compressor sound blanket. Wraps around AC compressors up to 10″ x 10″ x 19″ to reduce outdoor noise. Easy Velcro install.
Sanhua 3/8″ ODF service valve (SERVICE-BAR-3-S-T). For refrigerant charging, vacuum pulling, and line isolation. Used on liquid and suction lines during installation and service.
3/4″ sweat suction line filter drier, 16 cu. in. Installed on the suction side after a compressor burnout to remove acid and debris. Protects the new compressor.
Sanhua TXVFE-2-22-KIT expansion valve. R-22, 2-ton capacity, 3/8″ inlet, 1/2″ outlet. Includes both Aeroquip and Chatleff fittings for flexible installation. For residential AC systems.
![CD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)](https://otp-hvac.com/wp-content/uploads/2024/11/CD9601_SERVICE_VALVE_TEE_FITTING-300x300.png.webp)
C&D CD9601/2 brass tee fitting, 2-pack. 1/4″ female flare with depressor to two 1/4″ male flare ports (one with valve core). Adds a branch access point to refrigerant lines.
Supco SFL1450 safety locking valve caps, 50-pack. 1/4″ thermoplastic caps that lock onto refrigerant access valves. Contractor bulk pack — meets code requirements.
R-404A refrigerant, 24 lb cylinder. Used in commercial refrigeration — walk-in coolers, freezers, reach-in units, and ice machines. Not for residential AC.
Sanhua TXVFE-5-410A-KIT expansion valve. R-410A, 5-ton capacity, 3/8″ inlet, 1/2″ outlet. Includes both Aeroquip and Chatleff fittings for flexible installation. For residential AC systems.
Sanhua 7/8″ ODF service valve (SERVICE-BAR-7-S-T). For refrigerant charging, vacuum pulling, and line isolation. Rated 650 PSI. Compatible with R-22 and R-410A.
Sanhua TXVFE-4-22-KIT expansion valve. R-22, 4-ton capacity, 3/8″ inlet, 1/2″ outlet. Includes both Aeroquip and Chatleff fittings for flexible installation. For residential AC systems.
Sanhua TXVFE-4-410A-KIT expansion valve. R-410A, 4-ton capacity, 3/8″ inlet, 1/2″ outlet. Includes both Aeroquip and Chatleff fittings for flexible installation. For residential AC systems.
Goodman .055″ fixed orifice piston for 2-ton R-410A / 1.5-ton R-22 systems (R-410A and R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
Mastercool 63010 refrigerant recovery tank, 50 lb capacity. Steel construction with Y-valve design. DOT approved. Not rated for A2L refrigerants.
24VAC solenoid coil for Sanhua SHF-series reversing valves. Controls the reversing valve on heat pump systems to switch between heating and cooling. Spade terminals.
Sanhua TXVFE-4-410A-CHATLEFF expansion valve. R-410A, 4-ton capacity, 3/8″ inlet, 1/2″ outlet. Chatleff fittings on both sides. For residential AC systems.
Goodman .065″ fixed orifice piston for 2.5-ton systems (R-410A and R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
LG ABG036KAC scroll compressor, 3.5 ton, R-410A. Direct replacement for Copeland ZP36K5E and ZP37LXE series. Used in Rheem, Goodman, and other systems.
Sanhua TXVFE-3-410A-KIT expansion valve. R-410A, 3-ton capacity, 3/8″ inlet, 1/2″ outlet. Includes both Aeroquip and Chatleff fittings for flexible installation. For residential AC systems.