50002883-001 – THERMOSTAT WALL COVER PLATE
Honeywell thermostat wall cover plate. Covers paint marks and holes left behind from a previous thermostat. Fits FocusPRO and PRO series thermostats.
This is where you can browse products in this store.
Showing all 23 results

Honeywell thermostat wall cover plate. Covers paint marks and holes left behind from a previous thermostat. Fits FocusPRO and PRO series thermostats.

Supco 43004A mechanical thermostat. Horizontal mount. For 4 or 5-wire 24V systems and single-stage heat pumps. Adjustable heat anticipator. No batteries needed.

Braeburn 7205 WiFi thermostat. 3 heat / 2 cool. Color touchscreen. 7-day programming. Control from your phone. For multi-stage and heat pump systems.

Salus ST100ZB line voltage thermostat with Zigbee wireless. For baseboard heaters and other line voltage heating systems. Smart control from your phone.

Honeywell M847D-ZONE zone damper motor/actuator. 24VAC, spring-return. Fits ARD, EARD, and ZD series zone dampers. Direct-couples to 7/16″ damper shaft.

Thermostat cable supplied as a 250 ft roll of 20 AWG five-conductor low-voltage wire, for 24 V control wiring between thermostats, furnaces, air handlers and condensing units.

Braeburn 7500 wireless thermostat with touchscreen. Communicates wirelessly to the furnace — no thermostat wire needed. 7-day programmable with humidity control.

Braeburn 1230 non-programmable thermostat. 2 heat / 1 cool. Backlit display. For heat pump or dual-stage heating systems with single-stage cooling.

Metal thermostat guard with keyed lock and louvered cover. Prevents tampering in offices, rentals, and commercial spaces. Mounts over existing thermostat.

Braeburn 140221 zone control panel — 2 zones, 2 heat/1 cool. Controls two thermostats and zone dampers for independent comfort in two areas. Replaces HZ211.

Add-a-wire / common-maker accessory that creates a 24 V common (C) connection at the thermostat over existing cable, so a modern or smart thermostat can be powered without pulling a new wire.

Field Controls FAV-6 fresh air ventilation system. 6″ motorized damper with control unit. Brings in outside air through your existing HVAC system for better ventilation.

Braeburn Premier Series programmable thermostat for heat pump systems up to 3 heat / 2 cool and conventional systems up to 2 heat / 2 cool, and it will also run 250-750 mV millivolt heating systems.

Rheem/Ruud ProTech genuine OEM A2L refrigerant detection sensor built on a Sensirion sensing element, used in equipment charged with A2L mildly flammable refrigerants to detect a leak and signal the control to run mitigation.

Braeburn 140332 zone control panel — 3 zones, 3 heat/2 cool. Manages dampers and thermostats to control different areas independently. Replaces Honeywell HZ322.

Braeburn 5220 programmable thermostat. 3 heat / 2 cool. Backlit touchscreen. 7-day scheduling with energy monitoring. For multi-stage and heat pump systems.

Braeburn 5020 non-programmable thermostat. 2 heat / 1 cool. Large backlit display. Simple operation for heat pump or 2-stage systems. No scheduling needed.

Round 14 in. zone damper assembly with a 24 VAC three-wire power-open/power-closed actuator, used in zoned duct systems to open and close a branch run on a call from the zone panel.

Braeburn replacement supply air (discharge air) temperature sensor for Braeburn zoning systems.

Braeburn 2030 programmable thermostat. 1 heat / 1 cool. Backlit display. 5-2 day scheduling. For basic single-stage AC and furnace systems.

Clear plastic universal thermostat guard with lock. See-through cover fits thermostats up to 7.3″ x 5.25″ x 1.8″. Vented for proper airflow.

Braeburn 1030 non-programmable thermostat. 1 heat / 1 cool. Simple digital display. Runs on 2 AA batteries. For basic single-stage AC and furnace systems.

Braeburn 2230 programmable thermostat. 2 heat / 1 cool. Touchscreen display. 7-day scheduling with 4 time periods per day. For heat pumps or 2-stage heating.