SF8408 – STINGER
SKU · SVX-3R (5)
$4.03
Supco SF8408 Stinger line service valve. 1/8″ OD with 2″ copper tubing extension and plain cap. Braze-on access point for small refrigerant lines.
Product images are representative. Always verify compatibility with your model number before visiting us in store.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
All parts 1,617Equipment & Systems 119Filters & Air Quality 106Air Distribution 276Furnace & Heating 51Refrigeration 90Thermostats & Zone Controls 23Switches & Sensors 168Electrical Components 277Motors & Blower Parts 161Tools & Supplies 349
Showing all 25 results
-
In Stock
SUPCO -
Low Stock
UNIVERSALSF2035 – FITTING
SKU · SF2035$14.65Replacement refrigeration fitting stocked under part number SF2035.
-
In Stock
SANHUASERVICE-BAR-3-S-T – SERVICE VALVE (3/8)
SKU · 0151R00187S$32.72Sanhua 3/8″ ODF service valve (SERVICE-BAR-3-S-T). For refrigerant charging, vacuum pulling, and line isolation. Used on liquid and suction lines during installation and service.
-
Low Stock
SUPCOSFL1450 – PLASTIC LOCKING VALVE CAPS – 50 PACK (MEETS CODE REQUIREMENT)
SKU · SFL1450$117.00Supco SFL1450 safety locking valve caps, 50-pack. 1/4″ thermoplastic caps that lock onto refrigerant access valves. Contractor bulk pack — meets code requirements.
-
Low StockC&D VALVE
CD2028 – FITTING (1/4″M to 1/2″F)
SKU · CD2028$15.09C&D CD2028 brass adapter. 1/4″ male flare to 1/2″ female Acme swivel with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.
-
In Stock
UNIVERSALSN-58 – FLARE NUT (5/8″ SHORT FLARE NUT)
SKU · SN-58$4.13Short flare nut, 5/8 in.. For flare connections on refrigerant lines and service valves where a standard-length nut will not fit.
-
In Stock
UNIVERSALSN-12 – FLARE NUT (1/2″ SHORT FLARE NUT)
SKU · SN-12$3.90Short flare nut, 1/2 in.. For flare connections on refrigerant lines and service valves where a standard-length nut will not fit.
-
Low Stock
UNIWELDEZABM – FITTING (MINISPLIT ADAPTOR, GAS RETAINING)
SKU · EZABM$31.19Uniweld Ez-Turn anti-blowback mini split adapter. Converts a 1/4 in. male flare service port to the 5/16 in. (1/2-20) female fitting used on R-410A mini split service valves, and the gas-retaining design holds charge while you connect.
-
Low Stock
SANHUASERVICE-BAR-7-S-T – SERVICE VALVE (7/8)
SKU · 0151R00186S$46.70Sanhua 7/8″ ODF service valve (SERVICE-BAR-7-S-T). For refrigerant charging, vacuum pulling, and line isolation. Rated 650 PSI. Compatible with R-22 and R-410A.
-
In Stock
UNIVERSALCD2245 – BRASS CAP (1/4″, 6/PKG)
SKU · BC6$3.95C&D CD2245 brass flare caps, 6-pack. 1/4″ with neoprene O-ring seal. Replace missing or damaged caps on refrigerant service valve ports to prevent leaks.
-
Low Stock
C&D VALVECD2012 – FITTING (1/4″F to 1/2″M)
SKU · cd2012$15.23C&D CD2012 brass coupler. 1/4″ female flare swivel to 1/2″ male Acme with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.
-
In Stock
UNIVERSALSN-38 – FLARE NUT (3/8″ SHORT FLARE NUT)
SKU · SN-38$3.79Short flare nut, 3/8 in.. For flare connections on refrigerant lines and service valves where a standard-length nut will not fit.
-
In Stock
UNIVERSAL -
Low Stock
![CD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)](https://otp-hvac.com/wp-content/uploads/2024/11/CD9601_SERVICE_VALVE_TEE_FITTING-300x300.png)
C&D VALVECD9601/2 – TEE FITTING ([1] 1/4″F to [2] 1/4″M) (PACK OF 2)
SKU · CD9601$19.20C&D CD9601/2 brass tee fitting, 2-pack. 1/4″ female flare with depressor to two 1/4″ male flare ports (one with valve core). Adds a branch access point to refrigerant lines.
-
In Stock
SUPCOBPV31 – PIERCING VALVE (1/4″, 5/16″, 3/8″)
SKU · BPV31$8.11Supco BPV31 Bullet piercing valve for 1/4″, 5/16″, and 3/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.
-
Out of Stock
SUPCOSFL1402 – PLASTIC LOCKING VALVE CAPS – 2 PACK (MEETS CODE REQUIREMENT)
SKU · SFL1402$18.20Supco SFL1402 safety locking valve caps, 2-pack. 1/4″ thermoplastic caps that lock onto refrigerant access valves. Meets code requirements for tamper-resistant caps.
-
Low Stock
UNIVERSAL10U327 – QUICK COUPLER (90 DEGREE)
SKU · 10U327$24.0390-degree quick coupler for refrigeration service work.
-
In Stock
DIVERSITECHVVC-1 – VALVE CORE – 6 PACK
SKU · VVC-1$4.99DiversiTech VVC-1 valve core 6-pack. Brass and stainless steel Schrader cores with 1/4″ SAE ports. Replacement cores for refrigerant service valves and access fittings.
-
Low Stock
SUPCOSFL1410 – PLASTIC LOCKING VALVE CAPS – 10 PACK (MEETS CODE REQUIREMENT)
SKU · SFL1410$38.00Supco SFL1410 safety locking valve caps, 10-pack. 1/4″ thermoplastic caps that lock onto refrigerant access valves. Meets code requirements for tamper-resistant caps.
-
In Stock
SANHUASERVICE-BAR-6-S-T – SERVICE VALVE (3/4)
SKU · 0151R00185S$40.98Sanhua 3/4″ ODF service valve (SERVICE-BAR-6-S-T). For refrigerant charging, vacuum pulling, and line isolation. Rated 650 PSI. Compatible with R-22 and R-410A.
-
In Stock
UNIVERSALSN-14 – FLARE NUT (1/4″ SHORT FLARE NUT)
SKU · SN-14$3.44Short flare nut, 1/4 in.. For flare connections on refrigerant lines and service valves where a standard-length nut will not fit.
-
Out of Stock
CPS PRODUCTS19124 – LEFT HAND THREAD ADAPTOR (A2L)
SKU · AD44LH$18.46Yellow Jacket 19124 left-hand thread adapter for A2L refrigerants. 1/4″ LH female flare to 1/4″ RH male flare. Required for servicing R-32 and R-454B systems.
-
Low Stock
C&D VALVECD1454/2 – FITTING (1/4″F to 1/4″M WITH CORE) (2-PACK)
SKU · CD1454$14.44C&D CD1454/2 brass fitting, 2-pack. 1/4″ female flare to 1/4″ male flare with installed valve core. Adds a Schrader core to a port that doesn’t have one.
-
In Stock
SUPCOBPV21 – PIERCING VALVE (1/2″, 5/8″)
SKU · QTM-2$8.12Supco BPV21 Bullet piercing valve for 1/2″ and 5/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.
-
Low StockUNIVERSAL
SF2090 – FITTING
SKU · SF2090$15.50Replacement refrigeration fitting stocked under part number SF2090.
![CD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)](https://otp-hvac.com/wp-content/uploads/2024/11/CD9601_SERVICE_VALVE_TEE_FITTING-300x300.png.webp)
