62-24268-03 – CONTROL BOARD (RHEEM, OEM, GAS, HSI)
Rheem 62-24268-03 OEM control board for gas furnaces with hot surface ignition. Replaces 62-24268-01. Fits RGPJ series and similar Rheem/Ruud models.
This is where you can browse products in this store.
Showing 1–48 of 81 results

Rheem 62-24268-03 OEM control board for gas furnaces with hot surface ignition. Replaces 62-24268-01. Fits RGPJ series and similar Rheem/Ruud models.

Carrier HK61EA034 rectifier control board. Converts AC to DC for electronic components in Carrier, Bryant, and Payne air handlers. Replaces HK61EA004.

ICM Controls ICM2812 hot surface ignition furnace control board, published by ICM as a board-only replacement for the White-Rodgers 50M56U-843. It monitors ignition timing, trial for ignition, system switches, flame sensing and lockout.

Honeywell/Resideo S9200U1000 universal hot surface ignition integrated furnace control for single-stage gas heating and cooling appliances.

Carrier HK50AA051 terminal board (also listed as 1183618). Provides terminal connections for wiring inside commercial and residential Carrier/Bryant/Payne equipment.

Trane/American Standard OEM printed wiring board with a 16-pin connector. Trane Supply lists the part with the description "CONTROL; ICM FAN, PWB, 16 PIN" and files it under Furnace Control Boards.

Goodman PCBFM103S fan blower control board with time delay. Direct replacement for PCBFM131S and B1370735. Fits Goodman and Amana air handlers.

Lennox 619559-01 defrost control board kit (16V37) for heat pumps. Time/temperature defrost with anti-short-cycle protection. OEM Lennox.

Lennox direct spark ignition integrated control board, catalog number 21W14. The board manages the furnace ignition sequence and blower timing, driving the spark igniter and gas valve and monitoring flame.

Rheem 47-102684-204 defrost control board for heat pumps. Manages defrost timing to prevent ice buildup on outdoor coil. OEM Rheem/Ruud replacement.

White-Rodgers 50C51-707 two-stage integrated furnace control, a direct OEM replacement for the Goodman and Amana PCBKF1xx series. For two-stage furnaces with a variable-speed ECM blower; works on ComfortNet communicating or legacy 24 VAC systems.

Nortek 903106 gas furnace control board (ICM2805A aftermarket). Direct replacement for Nortek/Frigidaire furnaces. Manages ignition and blower operations.

Lennox 17W82 (LB-91097C) ignition control replacement kit. Replaces multiple older Lennox furnace boards including 21L890 and 72K79. Complete kit with harness.

Lennox 81W03 ignition control board. OEM replacement for Lennox furnaces. Manages ignition sequence and heating cycles. Replaces 75M17 and 78M47.

White-Rodgers 50M56-743 integrated furnace control kit, a direct OEM replacement for the Goodman and Amana PCBBF1xx series. Single or two stage, for 120V hot-surface-ignition furnaces with a multi-speed PSC blower; not for communicating or ECM-blower systems.

Goodman PCBBF112S control board (50A55-743 aftermarket). Fits GMS80 series Goodman gas furnaces. Direct replacement for B18099-26 and 0130F00005.

Rheem 47-100436-05 control board for air handlers with PSC motors. OEM replacement for Rheem and Ruud air handlers. Manages blower motor speed and timing.

Ameristar BRD05765 control board. OEM replacement for Ameristar air handlers. Replaces BRD04300, BRD4300, and BRD5765. Controls blower and system functions.

50M56U-801 aftermarket control board for Lennox single-stage furnaces. Replaces 103085 series, 100973 series, and many Lennox/Ducane/Armstrong boards.

ICM2813 aftermarket control board for Lennox SureLight furnaces. Direct replacement for 83M00 and dozens of Lennox part numbers. Fits single and 2-stage models.

Carrier/Bryant/Payne OEM ignition control board. Carrier publishes no public specification sheet for this part to non-dealers, and no manufacturer cross-reference could be verified, so no electrical ratings are stated here.

Trane CNT05165 control board (50A65-5165 aftermarket). 80V HSI integrated furnace control for Trane and American Standard systems. Replaces CNT03076 and more.

Carrier HK42FZ027 control board. OEM microprocessor-based board for Carrier, Bryant, and Payne furnaces. Manages ignition, blower, and system diagnostics.

ICM275C control board for Carrier furnaces. Replaces HH84AA001, HH84AA003, HH84AA005, HH84AA009, HH84AA014, HH84AA015, HH84AA021. Aftermarket direct fit.

Rheem 62-104058-02 OEM control board for gas furnaces with spark ignition. Also listed as 1194-200. Manages ignition, flame sensing, and blower operations.

Nordyne 903915A control board. OEM replacement for Nordyne gas furnaces. Also sold under part number 624643. Manages ignition, blower, and safety functions.

Nordyne / Intertherm / Miller OEM control board. Nordyne publishes no public specification sheet for this part number, so voltages, amperages and application data are not stated here – verify against the board silkscreen before installing.

Trane CNT09648 OEM control board for A801X series furnaces. Replaces earlier CNT07940 revision. Full system management with LED diagnostic codes.

Rheem 47-102684-83 defrost control board kit with sensors. Manages defrost timing on Rheem/Ruud heat pumps. Includes defrost sensors.

Defrost control board for Carrier, Bryant and Payne heat pumps, recorded internally as 1185790. The board times and terminates the defrost cycle, switching the reversing valve and cycling the outdoor fan based on the defrost thermostat and accumulated run time.

Lennox 94W83 (103085-03) ignition control board. OEM replacement for single-stage Lennox furnaces with PSC blower motors. Direct factory fit.

Honeywell S8610U3009 universal gas ignition control module (ICM2918). Replaces dozens of OEM ignition modules across Honeywell, Carrier, Goodman, and more.

Nortek 920915 control board for G7 and M7 series furnaces. OEM replacement. Also sold as 624742, 624844, and 904840. Manages ignition and blower control.

Trane CNT05482 defrost control board for heat pumps. Controls defrost cycle timing to prevent frost buildup on outdoor coil. OEM Trane part.

Lennox 16V38 defrost control board for heat pumps. Time/temperature defrost control with anti-short-cycle protection. OEM Lennox replacement.

Goodman PCBBF163S control board for GM9S series furnaces. OEM replacement. Also fits Daikin DM80SN models. Manages ignition, blower, and safety functions.

Trane CNT05001 defrost control board for heat pumps. Controls defrost cycle timing to prevent frost buildup on outdoor coil. OEM Trane part.

Universal fan timer control board, replaces over 150 OEM models including Honeywell ST9120 series. Works with single-stage gas furnaces. Drop-in replacement for most brands.

Rheem 47-100436-84J blower control board for Rheem and Ruud air handlers. OEM replacement — also listed as 47-100436-04. Controls blower motor speed and airflow.

Carrier HK61EA002 fan control board with time delay relay. OEM replacement — cross-references 1171000. Fits Carrier, Bryant, and Payne air handlers.

Goodman PCBBF145S control board. OEM replacement for Goodman and Amana furnaces including GMES960804CN. Manages ignition, blower, and safety functions.

Rheem RH2TZ6024STANNJ 5-ton air handler. Constant Torque ECM motor, R-410A compatible, SEER2 compliant. 24″ wide cabinet with multiple installation options.

Rheem 62-105217-01 OEM control board for gas furnaces with spark ignition. Manages ignition, flame sensing, and blower operations in Rheem/Ruud systems.

Goodman PCBDM133S defrost control board for heat pumps. Replaces PCBDM160 and PCBDM161. Manages defrost timing on Goodman and Amana heat pumps.

Carrier HK61EA006 fan control board with integrated time delay relay. OEM replacement — cross-references 1171734. Fits Carrier, Bryant, and Payne air handlers.

Rheem 62-24140-04 OEM control board for gas furnaces with direct spark ignition. Replaces 62-24140-02. ICM292 is the aftermarket equivalent. Fits RGPH/UGPH models.

York / Luxaire / Coleman (Source 1) OEM control board for X13 constant-torque motor applications.

Rheem/Ruud ProTech genuine OEM integrated furnace control (IFC) board. It manages the heating sequence from gas ignition through blower off-delay and reports faults through an onboard LED.
The control board is the "brain" of your furnace or air handler. It manages the startup sequence, monitors safety switches, and controls blower speeds.
Power surges and lightning strikes are common causes of board failure in Dallas. A surge protector can prevent future damage.