DP-1 – NITROGEN PURGE TOOL
$77.24DiversiTech DP-1 nitrogen purge tool. Adjustable flow dial for controlled nitrogen purge during brazing. Aluminum body, 50 PSI inlet. Essential for AC line work.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing 145–192 of 276 results
-
-
DRX3 – INFRARED REFRIGERANT LEAK DETECTOR
$692.75Fieldpiece DR82 infrared refrigerant leak detector. Detects leaks as small as 0.03 oz/yr. 10-year sensor life and 10-hour rechargeable battery. No false alarms from common gases.
-
ECBFF-1 – BALL VALVE
$18.07ECBFF-1 ball valve for refrigerant hoses. 1/4″ connection, brass construction. Controls refrigerant flow during charging, recovery, and evacuation.
-
ECMPRO – ECM MOTOR TESTER
$69.84Supco ECMPRO universal ECM motor tester. 24 VAC powered with 24-inch leads, magnetic case, and short circuit protection. Tests most ECM blower motors without the furnace board.
-
EFGC-012-YE-1010-36 – GAS PIPE (1/2 ” x 36″, YELLOW, FLEX)
$15.581/2″ x 36″ yellow flex gas connector with MIP fittings. Epoxy-coated stainless steel. Connects furnaces, water heaters, dryers, and ranges to your gas line.
-
ELECTAPE – ELECTRICAL TAPE (3/4″X60′, 7MIL)
$1.553/4″ x 60′ vinyl electrical tape, 7 mil thickness. Flame retardant and moisture resistant. Standard black electrical tape for wiring connections.
-
EZT-113 – DRAIN TRAP KIT
$17.69EZ Trap EZT-113 ClearTrap economy drain trap kit. 3/4″ transparent PVC with red watertight caps. See-through design lets you check for clogs without disassembly.
-
F5000 – FLARING TOOL
$99.44SPIN F5000 flaring tool set for 1/4″ to 3/4″ copper and aluminum tubing. Drill-powered (1,800 RPM) — creates flares faster than manual flaring tools.
-
FCN – WATERLESS AIR TRAP (P-TRAP UPGRADE)
$27.85Supco FCN waterless condensate trap — replaces traditional P-traps. No water to dry out, freeze, or clog with sludge. Compact design for tight spaces.
-
FCR6 – FIN COMB (8 to 20 FINS PER INCH)
$15.65Supco FCR6 fin comb ring set — 6 color-coded combs for 8 to 20 fins per inch. Straightens bent condenser and evaporator coil fins to restore airflow.
-
FDS181 – MASTIC (1 GALLON, FIBER-REINFORCED)
$20.82Foster FDS181 fiber-reinforced mastic, 1 gallon. Water-based duct sealant. UL 181 A-M and B-M listed. For sealing metal, fiberglass, and flex duct connections.
-
FG1 – DUCT BOARD HOLE CUTTER
$50.47Malco FG1 fiberglass duct board hole cutter. Cuts 4″ to 20″ diameter holes in 1″ thick duct board. Includes utility knife blade and compass. For duct fabrication.
-
FL34 – FLINT LIGHTER
$8.35Uniweld FL34 single-flint torch lighter. Steel construction with replaceable flint. The basic spark lighter every torch setup needs. Reliable ignition for acetylene torches.
-
FLEXPRO – TAPE (1.89″ x 360′, PLASTIC TAPE)
$15.361.89″ x 360′ plastic HVAC tape. Pressure-sensitive adhesive. For wrapping flex duct connections and general HVAC bundling. Also called Tuck Tape.
-
FSC10 – FLAME SENSOR CLEANER
$18.44Supco FSC10 flame sensor cleaner. Compact, durable tool cleans flame sensor rods in seconds. Fixes the most common cause of furnace short-cycling.
-
GASSTOP – GAS PIPE FITTING (1/2″ BRASS BALL VALVE, FIP x FIP)
$8.131/2″ brass ball valve with FIP x FIP threads. Full port design for gas shutoff. PTFE seals. Use as a gas shutoff valve for furnaces and appliances.
-
GCM5 – SAND CLOTH (1-1/2″ x 15′)
$7.77Sand cloth for copper pipe prep, 1-1/2″ x 15′ roll. 180-grit aluminum oxide. Cleans and preps copper before brazing or soldering for a leak-free joint.
-
GG-1 – SWOOSH DRAIN GUN
$43.74DiversiTech GG-1 Swoosh Drain Gun. Uses CO2 cartridges to blast clogs out of 3/8″ to 3/4″ condensate drain lines. Portable, 800 PSI burst. Quick and effective.
-
H-2600 – VACUUM PUMP OIL (1Q)
$12.97Vacuum pump oil, 1 quart. Hydro-Balance H-2600. Keeps your vacuum pump running smoothly and pulling deep vacuum. Change oil between every job for best results.
-
HS-519 – CABLE TIE TENSIONING & CUTTING TOOL
$25.99HS-519 cable tie tensioning and cutting tool. Tightens zip ties to a consistent tension and flush-cuts the tail. Saves time on wire bundling jobs.
-
HS31032 – HEAT SHIELD GEL (32 OZ)
$18.12Supco HS31032 Heat Shield Gel, 32 oz. Protects surrounding surfaces while brazing or soldering. Non-toxic, non-corrosive, evaporates in 24-48 hours.
-
IRC-120 – THERMAL CAMERA
$175.00IRC-120 thermal imaging camera. Spots hot and cold spots in ductwork, finds electrical issues, and checks insulation. Compact and easy to use for HVAC diagnostics.
-
IRHT81736 – RATCHETING TUBING CUTTER
$29.97Irwin IRHT81736 ratcheting tubing cutter. Cuts copper, brass, PVC, and aluminum from 1/4″ to 1-1/8″ OD. Ratchet action for tight spaces.
-
JL3KH6 – WIRELESS REFRIGERANT CHARGE AND AIR TEST KIT
$729.55Fieldpiece JL3KH6 wireless charge and air test kit. Includes pressure probes, pipe clamps, and psychrometers for real-time HVAC diagnostics via Job Link app.
-
JL3KR4 – WIRELESS REFRIGERANT CHARGE KIT
$485.05Fieldpiece JL3KR4 wireless refrigerant charge kit. Pressure probes and pipe clamps with 1000-foot wireless range and Rapid Rail sensors for fast superheat/subcooling readings.
-
JV1 – CONDENSATE CLEANOUT VALVE
$17.99Supco JV1 condensate cleanout valve. Installs inline on 3/4″ drain lines — open it to flush the line or attach a drain gun. Easy maintenance access point.
-
KBHC – BLADE – FG1
$12.28Malco KBHC replacement blade for the FG1 duct board hole cutter. Cuts 1.5″ thick fiberglass duct board. Durable steel blade — keeps cuts clean and precise.
-
KC100P – OXY/ACET TORCH KIT (INCLUDE TANKS AND GAS)
$605.91Uniweld KC100P oxyacetylene torch kit with tanks and gas included. Welds up to 1/8″ steel, brazes up to 1″ copper. Complete portable outfit — ready to use out of the box.
-
LS2538-14X12 -MINISPLIT LINE SET (25FT, FLARED)
$144.10Mini-split line set — 25 ft, 1/4″ liquid x 1/2″ suction, pre-flared ends. Insulated suction line. Ready to install on most 9,000-12,000 BTU ductless systems.
-
LS2538-14X38 – MINISPLIT LINE SET (FLARED, 25FT)
$131.55Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.
-
LT-CTB – COMPACT TUBING BENDER KIT (1/4″ – 7/8″)
$96.994LifetimeLines LT-CTB compact tubing bender kit. Bends 1/4″ to 7/8″ soft copper, aluminum, and brass tubing. Makes clean bends without kinking.
-
MAG1YL – MAGNETIC LOW VOLTAGE JUMPER WIRE
$14.95Supco MAG1YL magnetic jumper wire, 20 inches. Magnetic tips clip to terminals for hands-free HVAC diagnostics. Rated 30 VAC/VDC, 5 amps. Yellow wire.
-
MC ACETYLENE BOTTLE – EMPTY FOR PURCHASE – 10CU.FT.
$141.75MC-size acetylene bottle, empty, for purchase. 10 cu.ft. capacity. Compact and portable — great for small brazing jobs and tight spaces.
-
MG-1 – MANIFOLD SET W/ 60″ HOSES (BRASS – R22, R410, R407A)
$79.95DiversiTech MG-1 brass manifold gauge set with 60″ hoses. Works with R-22, R-410A, and R-407C. Good starter set for DIY or light commercial work.
-
MG44 – DIGITAL WIRELESS VACUUM MICRON GAUGE (A2L)
$263.30Fieldpiece MG44 wireless vacuum micron gauge. A2L compatible, 1000-foot wireless range. Rugged design with reversible angled coupler for tight access during evacuations.
-
MR45 – REFRIGERANT RECOVERY MACHINE (A2L)
$1,048.75Fieldpiece MR45 refrigerant recovery machine. 1 HP DC motor, A2L compatible, self-purge function, three auto-stop levels. Fast, efficient recovery for all common refrigerants.
-
MSHC – DUAL CHUCK (SHORT [2″], 1/4-5/16″)
$10.71Malco MSHC dual magnetic hex chuck driver, 2″ short length. Reversible 1/4″ and 5/16″ hex sizes. Magnetic tip holds screws. Cleanable magnet design.
-
MSHC1 – DUAL CHUCK (SHORT [2″], 5/16-3/8″)
$10.58Malco MSHC1 dual magnetic hex chuck driver, 2″ short length. Reversible 5/16″ and 3/8″ hex sizes. Magnetic tip with cleanable magnet for metal shavings.
-
MSHCST – DUAL CHUCK (SAWTOOTH, SHORT [2″], 1/4-5/16″)
$29.63Malco MSHCST SawTooth dual hex driver, 2″ short length. Reversible 1/4″ and 5/16″. SawTooth tip grips stripped screws that smooth drivers slip on.
-
MSHXLC – DUAL CHUCK (LONG [6″], 1/4-5/16″)
$25.97Malco MSHXLC long-reach (6″) dual magnetic hex chuck driver. Reversible 1/4″ and 5/16″. Extra length reaches screws recessed in duct flanges and panels.
-
MSHXLC1 – DUAL CHUCK (LONG [6″], 5/16-3/8″)
$25.86Malco MSHXLC1 long-reach (6″) dual magnetic hex chuck driver. Reversible 5/16″ and 3/8″. Extra length for recessed screws on ductwork and equipment.
-
MWT-6510L – AVIATION SNIP – OFFSET – LEFT
$33.43Midwest MWT-6510L offset left-cut aviation snip. GlideTech forged blades with KUSH’N-POWER grips. Professional-grade for heavy ductwork cutting.
-
MWT-6510R – AVIATION SNIP – OFFSET – RIGHT
$33.43Midwest MWT-6510R offset right-cut aviation snip. GlideTech forged blades with KUSH’N-POWER grips. Professional-grade for heavy ductwork cutting.
-
MWT-6510S – AVIATION SNIP – OFFSET – STRAIGHT
$33.43Midwest MWT-6510S offset straight-cut aviation snip. GlideTech forged blades with KUSH’N-POWER grips. Professional-grade for straight ductwork cuts.
-
MWT-C5 – SHEET METAL CRIMPER (5-BLADE)
$36.99Midwest MWT-C5 five-blade sheet metal crimper. 1-5/8″ throat depth with KUSH’N-POWER handles. Creates crimps for joining round duct fittings.
-
NITROGEN BOTTLE – EMPTY FOR PURCHASE – 40 CU.FT.
$241.47Nitrogen bottle, empty, for purchase. 40 cu.ft. capacity with CGA-580 valve. Used for pressure testing, brazing purge, and system evacuation in HVAC.
-
NITROGEN-REFILL – GAS CONTENTS (40 CU.FT.)
$26.75Nitrogen refill, 40 cu.ft. of gas contents. Bring in your empty 40 cu.ft. nitrogen bottle and exchange it for a full one. For HVAC pressure testing and brazing purge.
-
OXYGEN BOTTLE – EMPTY FOR PURCHASE – 20CU.FT.
$143.92Oxygen bottle, empty, for purchase. 20 cu.ft. capacity with CGA-540 valve. Used with acetylene for oxy-acetylene brazing, welding, and cutting.
![MSHC - DUAL CHUCK (SHORT [2], 1/4-5/16)](https://otp-hvac.com/wp-content/uploads/2024/11/CRHEX_MSHC_reverse_action_BIT-300x300.jpg)
![MSHC1 - DUAL CHUCK (SHORT [2], 5/16-3/8)](https://otp-hvac.com/wp-content/uploads/2024/11/Malco_MSHC1-300x300.jpg)
![MSHCST - DUAL CHUCK (SAWTOOTH, SHORT [2], 1/4-5/16)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHCST_SAWTOOTH_BIT-300x300.jpg)
![MSHXLC - DUAL CHUCK (LONG [6], 1/4-5/16)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHXLC_HEX_DRIVER-300x300.jpg)
![MSHXLC1 - DUAL CHUCK (LONG [6], 5/16-3/8)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHXLC1_HEX_DRIVER_CHUCK-300x300.png)
