PSCTN3650 – CABLE ZIP TIE STRAPS (36″, QTY – 50, NATURAL)
36″ natural cable zip tie straps, 50 lb tensile strength, nylon. Pack of 50. Extra-long for bundling large duct runs, conduit, or pipe groups.
This is where you can browse products in this store.
Showing all 18 results

36″ natural cable zip tie straps, 50 lb tensile strength, nylon. Pack of 50. Extra-long for bundling large duct runs, conduit, or pipe groups.

Yellow wire nuts, 100-count bag. Twist-on wire connectors for 18-10 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.

Cable zip tie straps, 48 in. long, natural color, 50 per pack. The extra length wraps bundles that standard 8 in. and 11 in. ties will not reach – line sets, flex duct, wire harnesses and strapping components during an install.

#8 x 1/2″ zinc hex head taper point screws, 100-pack. Self-piercing with 1/4″ zinc-plated hex head for sheet metal work.

11″ black cable zip ties, 50 lb tensile strength, UV-resistant nylon. Pack of 100. For bundling wires and securing components during HVAC installations.

#8 x 2″ white hex head taper point screws, 250-pack. Self-piercing with 1/4″ white painted hex head. Used for registers and grilles.

Bostitch STCR2619 series heavy duty PowerCrown staples, 1/2 in. leg and 7/16 in. crown, 5,000 per box.

#8 x 1/2″ zinc hex head taper point screws, 500-pack. Self-piercing with 1/4″ zinc-plated hex head. Bulk pack for shops and contractors.

#8 x 1/2″ hex head sheet metal screws, 1/4″ hex drive, 1000-pack. Zinc-plated self-piercing screws for HVAC sheet metal work.

#8 x 2″ white hex head taper point screws, 50-pack. Self-piercing with 1/4″ white painted hex head. For registers and grilles.

Blue wire nuts, 100-count bag. Twist-on wire connectors for 22-14 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.

Red wire nuts, 100-count bag. Twist-on wire connectors for 14-6 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.

Bostitch T6-8 heavy duty PowerCrown tacker in the outward-clinch configuration, a staple gun widely used for duct board and insulation work.

14″ screw-mount cable ties, 50 lb tensile strength, natural color with mounting head. Secure wiring and tubing to surfaces in HVAC installations.

#8 x 1/2″ hex head drill point screws, 500-pack. Self-drilling with 1/4″ hex drive. Bulk pack for contractors and big jobs.

#8 x 1/2″ hex head drill point screws, 100-pack. Self-drilling with 1/4″ hex drive. No pre-drilling needed for sheet metal.

Orange wire nuts, 100-count bag. Twist-on wire connectors for 22-14 AWG copper wires. Flame-retardant. Standard for HVAC and electrical wiring.

Retractable ratchet tie down strap, 1 in. wide by 12 ft long, 500 lb, in hi-viz orange. The retractable reel keeps the loose webbing out of the way on the truck.