This is where you can browse products in this store.
Showing all 36 results
1/2 to 1/3 HP ECM X13 constant-torque blower motor, dual voltage 115/208-230V. Fits Goodman, Trane, Lennox, and more. Preprogrammed with installation harness.
1/2 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 4-pin control. Direct drop-in for Genteq model 3.0 ECMs. Preprogrammed with harness included.
1/2 HP air handler blower motor, 208-230V, 3-speed, reversible rotation. Requires 10 MFD capacitor. Replaces Lennox 19L38 and D801205P01.
U.S. MOTORS (Nidec) direct-drive fan and blower motor, 1 HP, 1075 RPM, 3 speed, 115 V, 6 pole, 12.1 A. Permanent split capacitor design with an open air-over enclosure and a 1/2 in. shaft, used in evaporator and air handler blower duty.
1 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness included.
1/4 HP air handler blower motor, 208-230V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. The 230V version for air handlers that need a 1/4 HP motor.
1/2 to 1/6 HP air handler blower motor, 208-230V, 1075 RPM with reversible rotation. Requires 10 MFD capacitor. Thermal overload protection built in.
3/4 HP air handler blower motor, 208-230V, 1075 RPM, 4-speed reversible. Requires 10 MFD 370V capacitor (sold separately). The 230V version of the EM3466.
Packard EC Max electronically commutated direct-drive blower motor, 3/4 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.
3/4 HP air handler blower motor, 208-230V, 1075 RPM, 3-speed reversible. Requires 15 MFD capacitor. Replaces Lennox 19L40 and WG840590.
York OEM 1 HP double-shaft blower motor. 115V, 1100 RPM, 4-speed. Direct fit for York furnaces and air handlers. Replaces F48E34A48 and S83-536.
Fasco OEM replacement motor, 1/20 HP, single phase, 60 Hz, 208-230 V, 1450 RPM, 1 speed, 3.3 in. diameter body, open air-over enclosure.
Packard EC Max electronically commutated direct-drive blower motor, 1/3 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.
Genuine Daikin 4020638 indoor blower motor, 310 VDC / 40W, for FTXB24AXVJU ductless indoor units. Stocked in Dallas.
Ametherm SL32 1R030 inrush current limiter, 1 ohm / 30 A, for ECM blower motor control module repair. Part plus bench labor.
Fasco D258 double-shaft blower motor. 1/5 to 1/10 HP, 1550 RPM, 208-230V. 5-inch diameter with resilient ring mount, sleeve bearings, and auto overload protection.
3/4 to 1/5 HP furnace blower motor, 115V, 1075 RPM, multi-speed reversible. Requires 15 MFD capacitor. Fits Trane, Carrier, and other 115V furnaces.
Universal electronic communicating (ECM) replacement motor built on a Broad Ocean platform.
1/4 HP double-shaft blower motor. 1625 RPM, 208-230V with PSC technology and auto overload protection. Direct fit for First Company M10 air handlers and similar units.
Packard 46012 EC Max ECM blower motor, 1/2 HP, 115/230V, 1075 RPM. Replaces Genteq 3589/3590, Mars 06107/06207, Century EM3589. In stock in Dallas.
1/2 HP furnace blower motor, 115V, 1075 RPM, 4-speed with 10 MFD capacitor required. Replaces WG840463 and multiple Goodman/Trane furnace motors. Reversible rotation.
Fasco D337 double-shaft blower motor. 1/8 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount. Fits wall heaters, fan coils, and small units.
Motor module adapter — converts 16-pin connector to 4-pin for Genteq Evergreen VS or model 3.0 ECM motors. Required when replacing a GE 2.5 ECM with a newer Evergreen.
Packard EC Max electronically commutated direct-drive blower motor, 1 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.
1/3 HP air handler blower motor, 208-230V, 3-speed, reversible rotation. Requires 10 MFD capacitor. Replaces Lennox 19L36 and multiple GE/Genteq motors.
3/4 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 1050 RPM, 4-pin control. Direct replacement for Genteq 2.3 and 3.0 ECM motors.
1 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 4-pin control. Direct drop-in for Genteq model 3.0 ECMs. Largest HP in the Evergreen VS line.
Fasco D338 double-shaft blower motor. 1/6 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount and auto overload protection. Fits fan coils and PTACs.
1-1/3 HP universal ECM blower motor by U.S. Motors. 115/230V dual voltage, 1075 RPM. Replaces 16-pin variable speed models including EON and Nidec ECMs.
Nortek 622686 ECM blower motor — 1/2 HP, 1050 RPM, 208-230V, 48-frame. Variable speed with proprietary PWM harness. Direct replacement for 622686R.
Wagner multiple-horsepower direct-drive furnace blower motor, 115 V, 1075 RPM, 4 speed, 1/2 HP maximum.
OEM-style ECM motor and control module assembly used in Goodman/Amana gas furnaces and air handlers.
3/4 HP furnace blower motor, 115V, 1075 RPM, 4-speed reversible. Requires 10 MFD 370V capacitor (sold separately). Direct replacement for US Motors 55470.
3/4 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness.
1/3 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Fits Goodman, Trane, Lennox, Carrier, and other 115V furnaces.
1/4 HP furnace blower motor, 120V, 1075 RPM, 3-speed reversible. Requires 10 MFD capacitor. Budget-friendly option for smaller furnaces and air handlers.
The blower motor is inside your indoor air handler or furnace. It pushes conditioned air through your ductwork. When it fails, you'll lose airflow even though the system may still run.