What's the difference between 5860 / 2.0 / 2.3 / EON?

These are GE/Genteq ECM motor generations. 2.0 = first-gen variable speed (1990s-2000s); 2.3 = newer, more reliable; EON = newest tier with built-in diagnostics. They share the 16-pin harness and PWM control protocol — the 5860 universal kit covers all three.

Will this fit my Trane, Carrier, or Goodman variable-speed furnace?

If your existing motor is a GE/Genteq 2.0, 2.3, or EON with a 16-pin connector and PWM control from the board — yes. Nortek/Intertherm proprietary harnesses do NOT cross over. Bring the old motor in if you're unsure.

How do I program the dip switches?

Match the new motor's CFM/torque settings to your tonnage and air handler model. The harness label inside the motor has the dip-switch chart. If yours is missing or faded, look up your air handler's installation manual.

Will an ECM motor lower my power bill?

True variable-speed ECM (this one) runs at lower watts during long, low-demand cycles — typically 25-40% less than a comparable PSC. Best savings come from running fan-only or first-stage cooling for longer, gentler cycles.

Out of Stock

US Motors

5860 – BLOWER MOTOR – UNIVERSAL ECM (2.0, 2.3, EON, 16PIN, DUAL VOLTAGE)

Name: 5860 - BLOWER MOTOR - UNIVERSAL ECM (2.0, 2.3, EON, 16PIN, DUAL VOLTAGE)
Brand: US Motors
SKU: 5860
Price: 564.99 USD
Availability: OutOfStock

SKU 5860·Replaces 5860

$564.99

In-store price · paid at counter

Out of Stock at our Dallas counter

Tested before you leave. Free at the counter.

In-Store Only — We Don’t Ship

Every part is sold in person at our Dallas counter. No shipping, no online orders. Solo venta en tienda — no hacemos envíos.

Visit our Dallas counter to purchase

10226 Plano Rd, Suite 104 · Dallas TX 75238

Call (214) 340-9421 Get directions

Open now · Closes 7pm·Mon–Fri 10am–7pm · Sat 10am–3pm

Free part testingBench-tested at the counter

27,000+ in stockToday, on the shelf

4.9 · 546 reviewson Google

Since 199828 years on Plano Rd

Pro tip

Universal ECM motors (the 5860 / 2.3 EON style) replace GE/Genteq variable-speed blowers on 80%+ AFUE furnaces with PWM control boards. Verify your existing harness is 16-pin and your control board speaks PWM (not pulse-width or proprietary). If you're on a Nortek/Intertherm with a proprietary harness, this isn't the right motor — bring the old motor in and we'll sort it.

Free Part Testing

27,000+ In Stock

4.9 Stars · 546+ Reviews

Since 1998

🏪 In-Store Pickup Only — We do not offer shipping or online ordering. Visit our Dallas location to purchase.

Out of Stock

Visit our Dallas store to purchase

Call (214) 340-9421 Get Directions

In Stock — Pick Up at Our Dallas Store

10226 Plano Rd, Suite 104, Dallas TX 75238

Questions? Call or text (214) 340-9421

Mon–Fri 10 am – 7 pm | Sat 10 am – 3 pm

Symptoms of failure

No air at the vents but the outdoor unit is running
Blower hums but the wheel will not turn
Squealing or rumbling from the indoor unit
Airflow is weak on every register in the house
Blower runs for a few minutes then cuts out on the limit
Burning smell from the air handler or furnace closet

Seeing these does not always mean this part is the culprit. Bring the old one in and we will meter it at the counter, free, before you buy.

If your indoor unit runs but produces weak or no airflow, the blower motor may need replacement. The 5860 is a universal ECM motor designed to replace 16-pin variable-speed blower motors — including EON, Nidec, and GE 2.0/2.3 models. Comes with a programmable module for broad compatibility.

Specs: 1-1/3 HP, 115/230V dual voltage, 1075 RPM, 16-pin connector, ECM variable speed

Replaces: 5860, MOT09231, MOT9231

Fits: Universal replacement for systems using 16-pin ECM motors from GE, Nidec, or Emerson. Bring your old motor or furnace model number and we’ll confirm the fit.

Need help? See our AC Not Cooling Troubleshooting Guide.

In stock at Open To Public HVAC Parts in Dallas. We test parts at the counter before you buy. Call or text (214) 340-9421.

Specs

TypeUniversal ECM variable-speed blower motor
VoltageDUAL (115/230V)
ControlVariable / constant-torque ECM
Frame48Y

Installing it yourself

Difficulty 4/5Typical time 60-90 minutes

Kill power at the furnace or air handler switch and at the breaker. Confirm 0V.
Photograph every wire and the exact depth of the wheel on the shaft before anything comes out.
Slide the blower assembly out. It is heavier than it looks - support it.
Loosen the set screw and pull the wheel. A wheel puller saves a lot of swearing.
Match HP, voltage, speed count, rotation and frame. PSC and ECM X13 are not interchangeable.
Set the wheel to the same depth on the new shaft and tighten the set screw on the flat.
Reinstall, reconnect by wire color, restore power and check for vibration.
If it is an ECM, the module and the harness are part of the job - bring the old one so we can match it.

Power off at the disconnect first, every time. Not sure partway through? Bring it to the counter and we will walk it with you.

$564.99

Out of Stock · Dallas counter

Call Directions