MWT-C5 – SHEET METAL CRIMPER (5-BLADE)
$36.99Midwest MWT-C5 five-blade sheet metal crimper. 1-5/8″ throat depth with KUSH’N-POWER handles. Creates crimps for joining round duct fittings.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
Showing 97–144 of 164 results
-
-
PE44 – PIN EXTRACTOR TOOL
$25.40ESP PE44 pin extractor tool. Removes and reinserts AMP and Molex pins from HVAC wire harness connectors without cutting or splicing wires.
-
PL-12A – SELF LIGHTING TORCH TIP ASSEMBLY (7/8″ to 1-5/8″)
$128.80TurboTorch PL-12A self-lighting torch tip assembly. Brazes 7/8″ to 1-5/8″ copper with Extreme Swirl Technology for faster heat-up. No striker needed — built-in ignition.
-
PL-8A – SELF LIGHTING TORCH TIP ASSEMBLY (1/2″ to 1″)
$146.64TurboTorch PL-8A self-lighting torch tip assembly. Brazes 1/2″ to 1″ copper, solders 1″ to 2″ pipe. No striker needed — built-in piezo ignition for one-handed operation.
-
PRH2 – DIGITAL POCKET PSYCHROMETER
$90.85Fieldpiece PRH2 digital pocket psychrometer. Measures relative humidity, wet bulb, dew point, and dry bulb temps. Compact and durable for field use.
-
QT1105 – FLUSH CAN ACCESS VALVE
$36.10QwikProducts QT1105 can tap valve for HVAC system flush cans. Built-in pressure relief valve for safe refrigerant-line flushing. Reusable tool — pairs with flush solvent cans.
-
R308 – DEBURRING TOOL
$11.79Malco R308 pocket-size deburring tool with hardened steel blade. Cleans burrs off 1/4″ and larger copper tubing after cutting. Essential for clean brazing joints.
-
RC-1 – LIQUID CHARGING ADAPTER
$19.47DiversiTech RC-1 liquid charging adapter. Converts liquid refrigerant to vapor before it enters the compressor. Protects the compressor during charging.
-
RCB1 – REFRIGERATION COIL BRUSH
$8.69Supco RCB1 refrigeration coil brush, 27.5″ long with dual bristle lengths. Cleans between condenser and evaporator coil fins. Wooden handle.
-
RCPT-31 – CAN PIERCING TOOL
$20.32Everwell RCPT-31 can piercing tool. Taps into R-12, R-22, and R-134a refrigerant cans. Screw-on design with valve for controlled flow.
-
RR8 – CO2 CARTRIDGES (8 PACK)
$16.00CO2 cartridges, 8-pack. Standard size for the GG-1 Swoosh Drain Gun and other HVAC CO2-powered tools. Reliable output for clearing condensate drain lines.
-
S6000 – SWAGING TOOL (1/4 to 7/8)
$128.27SPIN S6000 swaging tool set for 1/4″ to 7/8″ copper tubing. Drill-powered (1,800 RPM) — swages copper without annealing. Faster than manual swage punches.
-
SC260 – CLAMP METER
$147.80Fieldpiece SC260 compact clamp meter. True RMS, 400A AC, 600V AC/DC with temperature measurement and backlight. A solid everyday meter for HVAC work.
-
SC640 – CLAMP METER
$269.25Fieldpiece SC640 swivel-head clamp meter. True RMS with inrush current, dual display, and temperature measurement. The upgraded meter for serious HVAC diagnostics.
-
SCM4 – CARBON MONOXIDE SENSOR
$299.95Fieldpiece SCM4 carbon monoxide detector. 0-1000 ppm range with fast electrochemical sensor, dual display, and audible alarms. Required for furnace safety testing.
-
SDMN5 – DUAL PORT MANOMETER
$185.84Fieldpiece SDMN5 dual-port manometer. Measures -60″ to 60″ WC for gas pressure and duct static readings. Includes adapters, magnetic hanger, and auto power-off.
-
SDMN6 – PRESSURE SWITCH TESTER (DUAL PORT MANOMETER)
$329.60Fieldpiece SDMN6 dual-port manometer with pressure switch testing. Built-in pump simulates draft conditions for testing furnace pressure switches on the spot.
-
SF3813 – VALVE CORE TOOL W/ CORES
$9.91Supco SF3813 valve core tool with 3 replacement cores. 3-inch all-brass body with textured grip. Removes and installs Schrader valve cores on AC service ports.
-
SM382V – DIGITAL MANIFOLD (A2L)
$605.74Fieldpiece SM382V digital refrigerant manifold. A2L compatible, wireless Job Link connectivity, built-in vacuum gauge. Reads pressure, temperature, superheat, and subcooling.
-
SM480V – DIGITAL MANIFOLD (A2L)
$776.11Fieldpiece SM480V 4-port digital refrigerant manifold. A2L compatible, wireless connectivity, integrated vacuum gauge. The 4-port upgrade for more complex refrigerant work.
-
SMP400 – NITROGEN REGULATOR
$65.99Nitrogen regulator with CGA580 connection and 1/4″ output. Use for brazing purge, pressure testing, and leak checking. Adjustable output pressure for HVAC applications.
-
SPK1 – STICK THERMOMETER
$35.15Fieldpiece SPK1 folding pocket thermometer. Pocketknife-style probe, -58°F to 392°F range. Quick and accurate temperature readings for HVAC field work.
-
SPK3 – INFRARED + STICK THERMOMETER
$118.05Fieldpiece SPK3 dual-temperature thermometer with infrared and stick probe. T1-T2 calculation, folding rod, and 8:1 infrared ratio. Reads surface and in-duct temps.
-
SR47 – WIRELESS REFRIGERANT SCALE
$368.40Fieldpiece SR47 wireless refrigerant scale. 252 lb capacity with remote control. Connects to Job Link app for wireless monitoring during charging and recovery.
-
SRS1 – WIRED REFRIGERANT SCALE
$228.55Fieldpiece SRS1 wired refrigerant scale. 110 lb capacity with weight alarms for charging and recovery. Water-resistant, portable, and built for field use.
-
SSP – HAND SPRAYER (1/2 GAL)
$15.751/2-gallon hand pump sprayer with adjustable nozzle. Use it for coil cleaner, bleach for drain lines, or general HVAC cleaning. Durable poly tank.
-
STCR50191/2-1M – 1/2 STAPLE – 1,000PK
$12.03STCR5019 1/2″ staples, 1,000-pack. Heavy-duty staples for insulation, duct wrap, and upholstery. Fits Arrow T50 and compatible staplers.
-
SW-MFRB – FLAME RESISTANT BLANKET
$58.5618″x18″ flame-resistant magnetic blanket for brazing in tight spaces. Integrated magnets stick to metal surfaces, reinforced grommets, and center slit for pipes. Protects walls and wiring.
-
TB-53 – CLIPTECH WALL ORGANIZER
$11.99ToughBuilt TB-53 ClipTech wall organizer, 24-inch steel rail. Mount your ClipTech pouches on the wall or in your van. Includes mounting hardware. Powder-coated steel.
-
TB-55-B – PADDED SHOULDER STRAP
$7.99ToughBuilt TB-55-B padded shoulder strap for tool bags and totes. Adjustable length with non-slip surface. Cushioned for long carry jobs. Fits most tool bags.
-
TB-66C – TOOL BACKPACK
$99.99ToughBuilt TB-66C tool backpack with 31 pockets and a laptop compartment. Rugged base protects contents. Hands-free carry for HVAC techs, electricians, and contractors.
-
TB-94-M-3 – FASTENER BAGS (3 FASTENER BAGS)
$10.99ToughBuilt TB-94-M-3 mesh fastener bags, 3-pack. Heavy-duty mesh windows for visibility. Top-mount carabiner clips for hanging. Organize screws, fittings, and small parts.
-
TB-CT-01 – CONTRACTOR POUCH
$30.99ToughBuilt TB-CT-01 contractor pouch with 23 pockets. ClipTech hub clips onto any belt. Holds speed squares, notebooks, pencils, and hand tools. Built for the job site.
-
TB-CT-104 – MASTER ELECTRICIAN’S POUCH
$43.99ToughBuilt TB-CT-104 master electrician’s pouch with 25 pockets. ClipTech hub, built-in tape measure clip, and slots for wire testers and flashlights. Works great for HVAC techs too.
-
TB-CT-106A – SERVICE POUCH
$34.99ToughBuilt TB-CT-106A service pouch with 20 pockets. ClipTech hub attachment. Sized for pliers, wrenches, screwdrivers, and flashlights. Great for HVAC service calls.
-
TB-CT-114 – JOURNEYMAN ELECTRICIAN’S POUCH
$38.99ToughBuilt TB-CT-114 journeyman electrician’s pouch with 21 pockets. ClipTech hub, tape measure clip, and wire tester slots. Versatile enough for any trade.
-
TB-CT-150 – CLIPTECH HUBS (3 PC)
$8.99ToughBuilt TB-CT-150 ClipTech Hubs, 3-pack. Attach any ToughBuilt ClipTech pouch to any belt. Keep spares so you can swap pouches fast between jobs.
-
TB-CT-20-LX – DRILL HOLSTER (SPECIALIST)
$24.99ToughBuilt TB-CT-20-LX specialist drill holster with 15 pockets. ClipTech hub, adjustable grip, and bit pockets. Keeps your drill on your hip and bits within reach.
-
TB-CT-22 – TECHNICIAN POUCH
$15.99ToughBuilt TB-CT-22 technician pouch with 11 pockets. Compact ClipTech design with snug-fit screwdriver loops. Ideal for service techs who want a minimal belt setup.
-
TB-CT-24 – PROJECT POUCH W/ HAMMER LOOP
$19.99ToughBuilt TB-CT-24 project pouch with hammer loop and 6 pockets. ClipTech hub. No-Snag hidden seam construction. A basic belt pouch for nails, screws, and a hammer.
-
TB-CT-36-L6 – TECHNICIAN 6-POCKET POUCH
$18.99ToughBuilt TB-CT-36-L6 technician 6-pocket pouch. Adjustable central pocket for pliers, four screwdriver loops, notebook slot, and tape clip. ClipTech hub attachment.
-
TB-CT-40P – PADDED BELT (STEEL BUCKLE)
$21.99ToughBuilt TB-CT-40P padded tool belt with steel buckle. Adjustable length, wide padding for comfort. Compatible with all ClipTech pouches. Built for all-day wear.
-
TB-CT-42 – WORK BELT
$8.99ToughBuilt TB-CT-42 work belt, fits waist sizes 32″ to 48″. Heavy-duty buckle, compatible with all ClipTech pouches. Basic no-padding belt for lighter tool setups.
-
TB-CT-61-18 – XL ROLLING MASSIVE MOUTH BAG
$176.99ToughBuilt TB-CT-61-18 XL rolling Massive Mouth tool bag. Patented wide-open design, hard body, rolling wheels, and telescoping handle. Haul your full tool kit without lifting.
-
TB-CT-62-12 – MEDIUM MASSIVE MOUTH BAG (12″, WATERPROOF)
$64.99ToughBuilt TB-CT-62-12 medium Massive Mouth tool bag, 12-inch, waterproof bottom. Patented wide-open design holds its shape. Hard body with rugged base.
-
TB-CT-62-16 – LARGE MASSIVE MOUTH BAG (16″, WATERPROOF)
$91.99ToughBuilt TB-CT-62-16 large Massive Mouth tool bag, 16-inch, waterproof bottom. Holds more tools with the same wide-open design. Hard body construction.
-
TB-CT-62-20 – X-LARGE MASSIVE MOUTH BAG (20″, WATERPROOF)
$99.99ToughBuilt TB-CT-62-20 X-large Massive Mouth tool bag, 20-inch, waterproof bottom. Biggest non-rolling bag in the Massive Mouth line. Hard body with rugged base.
-
TB-H4-12-IM – ELECTRICIAN’S FOLDING UTILITY KNIFE
$16.98ToughBuilt electrician’s folding utility knife. Combines knife, wire cutter, prying tool, and screwdriver in one compact folding design.
