PE44 – PIN EXTRACTOR TOOL

Pin extractor tool for releasing individual pins from AMP and Molex-style wire harness connectors. Instead of cutting wires and splicing them back together, this tool lets you slide the pin out of the connector housing cleanly. Essential for rewiring control boards, motors, and gas valves on furnaces and air handlers.

Specs: For AMP and Molex pin connectors, by ESP

Replaces: PE44

Fits: Standard AMP and Molex HVAC wire harness connectors

In stock at Open To Public HVAC Parts in Dallas. We test parts at the counter before you buy. Call or text (214) 340-9421.

Specs

• TypeHand tool

What tools do I actually need to change a capacitor or a contactor?

A nut driver set, insulated screwdrivers, needle-nose pliers and a meter. That is most of the residential electrical work. Add a crimper and wire strippers if you are doing anything with terminals.

What size nut driver fits HVAC panel screws?

5/16 inch covers the large majority of panel and blower screws, with 1/4 inch second. If you buy one driver, buy 5/16.

Insulated tools - necessary or marketing?

Necessary if you are working near live terminals, which on HVAC you often are. Insulated handles are a second line of defence, not a substitute for killing power at the disconnect and confirming zero volts.

What is a fin comb for?

Straightening bent condenser fins so air can get through the coil again. Hail, weed trimmers and pressure washers all bend them, and a flattened coil quietly costs capacity all summer.

Do you stock these?

On the shelf at 10226 Plano Rd, Suite 104 in Dallas.