This is where you can browse products in this store.
Showing all 23 results
TurboTorch PL-8A self-lighting torch tip assembly. Brazes 1/2″ to 1″ copper, solders 1″ to 2″ pipe. No striker needed — built-in piezo ignition for one-handed operation.
Victor G150-60-540R oxygen regulator. Compact single-stage design for light-duty welding and brazing. CGA540 connection fits standard oxygen tanks.
TurboTorch TDLX2003MC self-lighting torch kit for brazing and soldering. Works with 10 cu ft acetylene tanks. Includes regulator, hose, handle, and tip — ready to use out of the box.
Everwell CT-501 telescopic inspection mirror with 360° swivel and chrome finish. Extends to see behind equipment and inside ductwork. Pocket-sized for field use.
Nitrogen regulator with CGA580 connection and 1/4″ output. Use for brazing purge, pressure testing, and leak checking. Adjustable output pressure for HVAC applications.
TurboTorch AJ4-T torch tip assembly for brazing 1/2″ to 1″ copper. Medium flame, quick-connect fitting. Same heat range as the A-8 tip. Good all-around HVAC brazing tip.
TurboTorch AJ5-T torch tip for brazing 7/8″ to 1-5/8″ copper and soldering up to 3″. Heavy-duty output for larger commercial piping. Quick-connect fitting.
TurboTorch 2AM-T acetylene torch handle with quick-connect tip fitting. Extreme Swirl Technology for efficient heat distribution. The handle that most HVAC brazing tips connect to.
Western Enterprises VN500 nitrogen purging regulator. Built specifically for HVAC nitrogen purge during brazing. Precise low-flow control to prevent oxidation inside copper lines.
Victor 3-W-J torch tip for J Series light-duty torches. Largest in the J Series — more heat for bigger copper tubing and heavier brazing jobs.
Malco R308 pocket-size deburring tool with hardened steel blade. Cleans burrs off 1/4″ and larger copper tubing after cutting. Essential for clean brazing joints.
TurboTorch AR-MC acetylene regulator. Controls gas flow from acetylene tanks to your torch. Built-in gauge for pressure monitoring. Fits standard B tank connections.
Victor 2-W-J torch tip for J Series light-duty torches. Mid-range tip for general brazing and soldering on copper. Controlled heat output.
Uniweld KC100P oxyacetylene torch kit with tanks and gas included. Welds up to 1/8″ steel, brazes up to 1″ copper. Complete portable outfit — ready to use out of the box.
Everwell CT-503 telescoping magnetic retrieval tool. Extends up to 25″ with a strong magnetic head for grabbing dropped screws, bolts, and small parts. Pocket clip included.
Uniweld FL34 single-flint torch lighter. Steel construction with replaceable flint. The basic spark lighter every torch setup needs. Reliable ignition for acetylene torches.
TurboTorch A-5 torch tip for brazing 1/4″ to 3/4″ copper tubing. Air-acetylene, quick-connect fitting. One of the most common HVAC brazing tips.
12-foot twin oxy-acetylene hose set, 3/16″ diameter, Grade R, 200 PSI working pressure. Standard B-fitting connections for welding and brazing setups.
Victor 1-W-J torch tip for J Series light-duty torches. Good for smaller brazing and soldering jobs on thin copper. Precise flame control for detail work.
TurboTorch TDLX2010B torch kit for brazing and soldering. Works with 40 cu ft acetylene tanks. Includes regulator, hose, handle, and tip for larger jobs.
18″x18″ flame-resistant magnetic blanket for brazing in tight spaces. Integrated magnets stick to metal surfaces, reinforced grommets, and center slit for pipes. Protects walls and wiring.
Victor G150-15-200R acetylene regulator. Compact single-stage design for light-duty brazing and soldering. CGA200 connection fits standard acetylene tanks.
TurboTorch PL-12A self-lighting torch tip assembly. Brazes 7/8″ to 1-5/8″ copper with Extreme Swirl Technology for faster heat-up. No striker needed — built-in ignition.