0125 – PVC CUTTING TOOL (3/8″ to 1″)
SKU · 36101
$13.19
PVC cutting tool for 3/8″ to 1″ pipe. One-hand ratcheting design for clean cuts on condensate drain lines and small PVC pipes.
Product images are representative. Always verify compatibility with your model number before visiting us in store.
Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
All parts 1,617Equipment & Systems 119Filters & Air Quality 106Air Distribution 276Furnace & Heating 51Refrigeration 90Thermostats & Zone Controls 23Switches & Sensors 168Electrical Components 277Motors & Blower Parts 161Tools & Supplies 349
Showing 1–48 of 56 results
-
In Stock
VANCOUVER SUPPLIES -
Low Stock
TOLSEN30022 – AVIATION SNIP (STRAIGHT)
SKU · 30022$10.99Straight-cut aviation snips with hardened steel blades. Cuts sheet metal, aluminum flashing, and thin steel cleanly. Ergonomic handles for all-day use.
-
In Stock
SUPCOFCR6 – FIN COMB (8 to 20 FINS PER INCH)
SKU · FCR6$15.65Supco FCR6 fin comb ring set — 6 color-coded combs for 8 to 20 fins per inch. Straightens bent condenser and evaporator coil fins to restore airflow.
-
Out of Stock
UNIVERSALB100 – INDIVIDUAL BIT HOLDER (1 PC)
SKU · INDIVIDUAL BIT HOLDER$1.99Individual bit holder (1 piece). Quick-release design for fast bit changes. Standard 1/4″ hex shank fits any drill or impact driver.
-
In Stock
EVERWELLCT-122 – SERVICE RATCHET WRENCH
SKU · CT-122$10.95CT-122 service ratchet wrench by Everwell. Four sizes in one chrome-plated tool with reversible ratchet. Built for HVAC valve and fitting work.
-
In Stock
UNIVERSALHS-519 – CABLE TIE TENSIONING & CUTTING TOOL
SKU · HS519$25.99HS-519 cable tie tensioning and cutting tool. Tightens zip ties to a consistent tension and flush-cuts the tail. Saves time on wire bundling jobs.
-
In Stock
TOUGHBUILTTB-H4-61-S3 – 3″ SEAMER
SKU · TB-H4-61-S3-6BES$26.99ToughBuilt 3-inch hand seamer. Forged head with depth markings for accurate bends. Ergonomic dual-position grip for bending sheet metal edges and seams.
-
In Stock
IRWIN1948779 – EXTENDING SCREWDRIVER
SKU · 1948779$12.98Irwin 1948779 extending screwdriver. Shaft extends from 5″ to 11″ for hard-to-reach screws. Includes 5 impact bits. Handy for HVAC equipment access panels.
-
In Stock
DAKOTA SOURCING36113 – DUCT KNIFE (DOUBLE SIDED – SERRATED & STRAIGHT)
SKU · 36113$15.15Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.
-
Low Stock
WOKIN33004 – TUBING CUTTER (UP TO 1-1/8″)
SKU · 330628$9.99Tubing cutter for 1/8″ to 1-1/8″ OD tubing. High-carbon steel blade with micrometer adjuster for precise cuts on copper and aluminum refrigerant lines.
-
In Stock
DAKOTA SOURCING36104 – RATCHETING PVC CUTTING TOOL
SKU · 36104$17.69Ratcheting PVC cutter — cuts plastic pipe and tubing up to 2″ with smooth, burr-free results. Ratchet action reduces hand strain on bigger cuts.
-
Out of Stock
TOUGHBUILTTB-H4-12-IM – ELECTRICIAN’S FOLDING UTILITY KNIFE
SKU · TB-H4-12-IM$16.98ToughBuilt electrician’s folding utility knife. Combines knife, wire cutter, prying tool, and screwdriver in one compact folding design.
-
Low Stock
MIDWESTMWT-C5 – SHEET METAL CRIMPER (5-BLADE)
SKU · MWT-C5$36.99Midwest MWT-C5 five-blade sheet metal crimper. 1-5/8″ throat depth with KUSH’N-POWER handles. Creates crimps for joining round duct fittings.
-
Low Stock
TOUGHBUILTTB-H4S-40-TMK-2 – TRADESMAN KNIFE + SHEATH
SKU · TB-H4S-40-TMK-2$14.99ToughBuilt tradesman knife with sheath. 4-inch titanium-coated blade, full metal tang. All-purpose fixed-blade knife for HVAC and construction work.
-
Low Stock
HARDEN540560 – ADJUSTABLE WRENCH (10″)
SKU · 540560$12.9910-inch adjustable wrench with chrome finish and precision-machined jaws. Standard all-purpose wrench for HVAC nuts, bolts, and fittings.
-
Low Stock
HARDEN560166 – SIDE CUTTER
SKU · 56166$7.99Side cutter pliers with hardened steel blades. Compact design for flush-cutting wire in tight spaces. Clean cuts on thermostat wire and control wiring.
-
In Stock
UNIVERSAL16569 – 6-IN-1 SCREWDRIVER
SKU · screwdriver$5.996-in-1 multi-bit screwdriver with Phillips, slotted, and nut driver tips. One tool handles most HVAC panel screws and terminal connections.
-
In Stock
HARDEN660613 – WIRE STRIPPER, CRIMPER, CUTTER
SKU · W091022$16.98Multi-function wire stripper, crimper, and cutter. Auto-stripping action with Cr-Mo blades. Handles stripping, crimping, and cutting in one tool.
-
Low Stock
ESPPE44 – PIN EXTRACTOR TOOL
SKU · PE44$25.40ESP PE44 pin extractor tool. Removes and reinserts AMP and Molex pins from HVAC wire harness connectors without cutting or splicing wires.
-
In Stock
UNKNOWNLT-CTB – COMPACT TUBING BENDER KIT (1/4″ – 7/8″)
SKU · LT-CTB$96.994LifetimeLines LT-CTB compact tubing bender kit. Bends 1/4″ to 7/8″ soft copper, aluminum, and brass tubing. Makes clean bends without kinking.
-
Low Stock
HARDEN10014 – ADJUSTABLE CHANNEL WRENCH (10″)
SKU · 560421$9.9910-inch adjustable channel wrench with precision jaws and non-slip handles. Chrome-plated for rust resistance. General-purpose HVAC and plumbing grip tool.
-
In Stock
HILMOR1839046 – SERVICE HEX KEY ADAPTER
SKU · 1839046$7.25Hilmor service hex key adapter for 3/16″ and 5/16″ hex valves. Makes opening liquid and suction service valves quick and easy without fumbling for Allen keys.
-
Low Stock
BOSTITCHSTCR50191/2-1M – 1/2 STAPLE – 1,000PK
SKU · STCR50191/2-1M$12.03STCR5019 1/2″ staples, 1,000-pack. Heavy-duty staples for insulation, duct wrap, and upholstery. Fits Arrow T50 and compatible staplers.
-
In Stock
TOUGHBUILTTB-H4-60-SOL – AVIATION SNIPS (STRAIGHT, OFFSET)
SKU · TB-H4-60-SOL$18.99ToughBuilt straight offset long-cut aviation snips. Forged blades with offset handle keeps hands above the metal for longer straight cuts.
-
In Stock
UNIVERSALIRHT81736 – RATCHETING TUBING CUTTER
SKU · 42080$29.97Irwin IRHT81736 ratcheting tubing cutter. Cuts copper, brass, PVC, and aluminum from 1/4″ to 1-1/8″ OD. Ratchet action for tight spaces.
-
In Stock
DAKOTA SOURCING36106 – REPLACEMENT BITS FOR 36105 (5PC)
SKU · 36106$25.865-pack replacement bits for the 36105 adjustable hole cutter. Hardened steel for clean, burr-free cuts in sheet metal ductwork.
-
Low Stock
IRWIN1948778 – 6-IN-1 NUT DRIVER
SKU · 1948778$14.98Irwin 6-in-1 SAE nut driver. Six sizes (1/4″ to 1/2″) in one compact tool. Covers the most common nut driver sizes for HVAC sheet metal screws.
-
In Stock
TOLSEN33003 – MINI TUBING CUTTER (1/8-7/8)
SKU · 330522$7.99Mini tubing cutter, 1/8″ to 7/8″ OD capacity. Small enough for tight spaces around coils and line sets. Clean cuts on copper, aluminum, and brass.
-
In Stock
TOUGHBUILTTB-H4-60-L – AVIATION SNIPS (LEFT)
SKU · TB-H4-60-L-6BES$17.99ToughBuilt left-cut aviation snips. Induction-hardened forged blades with dual grip positions. Flush-cut design for tight ductwork trimming.
-
Out of Stock
TOUGHBUILTTB-H4S5-23FU – FOLDING JAB SAW + BLADES
SKU · TB-H4S5-23FU$22.99ToughBuilt folding jab saw with 5 replacement blades. Quick-release blade swap. Folds for pocket carry. Cuts drywall, duct board, and insulation.
-
Low Stock
TOLSEN33006 – TUBING CUTTER (UP TO 2½”)
SKU · 33006$21.75Tubing cutter for up to 2-1/2″ OD. Quick-action ratcheting design cuts copper, aluminum, and plastic tubing. Handles large line sets and drain lines.
-
In Stock
SUPCOFSC10 – FLAME SENSOR CLEANER
SKU · FSC10$18.44Supco FSC10 flame sensor cleaner. Compact, durable tool cleans flame sensor rods in seconds. Fixes the most common cause of furnace short-cycling.
-
Low Stock
UNIVERSAL24F – METAL FOLDING TOOL
SKU · 24F$39.68Malco 24F metal folding tool, 24 inches long. Dual folding depths (3/8″ and 1″) for bending sheet metal edges. Heavy-duty steel for ductwork fabrication.
-
In Stock
TOLSEN38013 – SCREWDRIVER SET (6PC, INSULATED)
SKU · 38013$15.896-piece insulated screwdriver set rated to 1000V. Phillips and slotted tips with ergonomic handles. Required for safe electrical and HVAC work.
-
In Stock
TOLSEN25006 – TINNING HAMMER (40oz)
SKU · 25006$16.9040oz tinning hammer with polished striking face and wooden handle. Built for bending, seaming, and forming sheet metal ductwork in HVAC installations.
-
In Stock
AMPROBEIRC-120 – THERMAL CAMERA
SKU · IRC-120$175.00IRC-120 thermal imaging camera. Spots hot and cold spots in ductwork, finds electrical issues, and checks insulation. Compact and easy to use for HVAC diagnostics.
-
Low Stock
TOLSEN30023 – AVIATION SNIP (RIGHT)
SKU · 30023$9.99Right-cut aviation snips with hardened steel blades. Makes right-turning curves and straight cuts in sheet metal. Ergonomic non-slip handles.
-
Low Stock
MIDWESTMWT-6510L – AVIATION SNIP – OFFSET – LEFT
SKU · MWT-6510L$37.06Midwest MWT-6510L offset left-cut aviation snip. GlideTech forged blades with KUSH’N-POWER grips. Professional-grade for heavy ductwork cutting.
-
In Stock
MALCO1/8ALLEN – WRENCH
SKU · WT918G$9.58Malco WT918G T-handle hex key, 1/8″ size, 9″ long. Vinyl cushion grip for torque. Alloy steel construction for HVAC service valve and setscrew work.
-
In Stock
![MSHXLC - DUAL CHUCK (LONG [6], 1/4-5/16)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHXLC_HEX_DRIVER-300x300.jpg)
MALCOMSHXLC – DUAL CHUCK (LONG [6″], 1/4-5/16″)
SKU · MSHXLC$25.97Malco MSHXLC long-reach (6″) dual magnetic hex chuck driver. Reversible 1/4″ and 5/16″. Extra length reaches screws recessed in duct flanges and panels.
-
Low Stock
MIDWESTMWT-6510R – AVIATION SNIP – OFFSET – RIGHT
SKU · MWT-6510R$37.06Midwest MWT-6510R offset right-cut aviation snip. GlideTech forged blades with KUSH’N-POWER grips. Professional-grade for heavy ductwork cutting.
-
Low Stock
MIDWESTMWT-6510S – AVIATION SNIP – OFFSET – STRAIGHT
SKU · MWT-6510S$33.43Midwest MWT-6510S offset straight-cut aviation snip. GlideTech forged blades with KUSH’N-POWER grips. Professional-grade for straight ductwork cuts.
-
In Stock
MILWAUKEE48-32-4803 – BIT HOLDER
SKU · A-969-36$2.99Milwaukee 48-32-4803 magnetic bit holder. 3-inch impact-duty design locks bits tight during high-torque driving. Fits all standard 1/4″ hex shank bits.
-
Out of Stock
TOLSEN10006 – NEEDLE NOSE PLIER
SKU · 10006$8.496-inch needle nose pliers with serrated jaws. Reaches into tight spaces for bending wire, pulling pins, and grabbing small parts on HVAC equipment.
-
In Stock
![MSHXLC1 - DUAL CHUCK (LONG [6], 5/16-3/8)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHXLC1_HEX_DRIVER_CHUCK-300x300.png)
MALCOMSHXLC1 – DUAL CHUCK (LONG [6″], 5/16-3/8″)
SKU · MSHXLC1$25.86Malco MSHXLC1 long-reach (6″) dual magnetic hex chuck driver. Reversible 5/16″ and 3/8″. Extra length for recessed screws on ductwork and equipment.
-
In Stock
EVERWELLCT-501 – INSPECTION MIRROR
SKU · CT-501$7.86Everwell CT-501 telescopic inspection mirror with 360° swivel and chrome finish. Extends to see behind equipment and inside ductwork. Pocket-sized for field use.
-
Out of Stock
TOUGHBUILTTB-H4S-40-DK-2 – DUCT KNIFE + SHEATH
SKU · TB-H4S-40-DK-2-6BES$21.98ToughBuilt duct knife with sheath. Dual-edged blade — fine and serrated sides. Full steel tang for durability. Cuts duct board, insulation, and flex duct.
-
In Stock
EVERWELLCT-503 – MAGNETIC TELESCOPING RETRIEVAL TOOL
SKU · CT-503$6.71Everwell CT-503 telescoping magnetic retrieval tool. Extends up to 25″ with a strong magnetic head for grabbing dropped screws, bolts, and small parts. Pocket clip included.
![MSHXLC - DUAL CHUCK (LONG [6], 1/4-5/16)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHXLC_HEX_DRIVER.jpg.webp)
![MSHXLC1 - DUAL CHUCK (LONG [6], 5/16-3/8)](https://otp-hvac.com/wp-content/uploads/2024/11/MSHXLC1_HEX_DRIVER_CHUCK.png.webp)
Showing 48 of 56 parts