Stock up on HVAC tools, tape, sealants, drain pans, condensate pumps, refrigerant scales, manifold gauges, and installation supplies at our Dallas walk-in store. Whether you’re a weekend DIYer or a full-time technician, we have the essentials.We carry professional-grade tools alongside homeowner-friendly supplies. Need something specific? Call ahead at (214) 340-9421 and we’ll check stock. Visit us at 10226 Plano Rd, Dallas TX — open weekdays until 7pm, Saturdays until 3pm.
Everything is in-store only — we don’t ship. Call ahead to check stock and pick it up the same day.
Showing 97–144 of 349 results
Yellow Jacket 42036 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-32, R-454B, and R-410A — ready for next-gen refrigerants.
2″ x 30′ self-adhesive insulation tape. Foam tape that prevents condensation on cold pipes and ducts. For HVAC, plumbing, and refrigeration lines.
Yellow Jacket 46010 BRUTE II 4-valve manifold — aluminum body, 3/8″ bore, no hoses. Full-size 3-1/8″ gauges. Faster vacuum and charging than 2-valve manifolds.
Mastercool 60 in. nylon barrier charging hose set with automatic shut-off (anti-blowback) valve fittings, so refrigerant is retained in the hose when you pull it off the system.
Milwaukee 48-32-4803 magnetic bit holder. 3-inch impact-duty design locks bits tight during high-torque driving. Fits all standard 1/4″ hex shank bits.
Yellow Jacket 49100 replacement gauge crystal, 3-1/8″ (80mm). Polycarbonate. Fits BRUTE II manifolds and other 3-1/8″ dry gauges. Clear view, impact resistant.
Yellow Jacket 49190 protective gauge boot set — red and blue rubber covers for 3-1/8″ manifold gauges. Cushion against drops and impacts without blocking the gauge face.
Malco WT9532G T-handle hex key, 5/32″ size, 9″ long. Vinyl cushion grip and alloy steel. Common size for HVAC setscrews and motor mount bolts.
5/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
5/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
5/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 5/8″ copper pipe in a straight line. Wrot copper for brazing.
5/8″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Common suction line size for smaller residential AC and mini-splits.
Sheet metal hammer for duct fabrication and field seaming.
10-inch adjustable wrench with chrome finish and precision-machined jaws. Standard all-purpose wrench for HVAC nuts, bolts, and fittings.
Side cutter pliers with hardened steel blades. Compact design for flush-cutting wire in tight spaces. Clean cuts on thermostat wire and control wiring.
6-1 PVC drain pan fitting with rubber gasket and metal nut, 3/4″ slip. Connects your drain pan to the condensate line. Schedule 40 PVC — won’t leak if installed right.
Plastic secondary drain pan, 18″ x 38″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting included.
Plastic secondary drain pan, 30″ x 30″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting. Rolled edges.
Plastic secondary drain pan, 36″ x 36″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting. Rolled edges.
Plastic secondary drain pan, 60″ x 30″, ABS construction. Sits under your indoor coil or air handler to catch overflow. 3/4″ PVC drain fitting. Rolled edges.
Adapter for connecting an overseas-thread regulator to a standard torch hose.
Milwaukee SAWZALL corded reciprocating saw kit with a 12 amp motor and the tool-free QUIK-LOK blade clamp, supplied with a carrying case.
Multi-function wire stripper, crimper, and cutter. Auto-stripping action with Cr-Mo blades. Handles stripping, crimping, and cutting in one tool.
Milwaukee 18 gauge shear for cutting sheet metal and ductwork, driven by a 6.8 amp motor with variable speed to 2,500 strokes per minute.
#8 x 1/2″ hex head drill point screws, 100-pack. Self-drilling with 1/4″ hex drive. No pre-drilling needed for sheet metal.
#8 x 1/2″ hex head drill point screws, 500-pack. Self-drilling with 1/4″ hex drive. Bulk pack for contractors and big jobs.
#8 x 2″ white hex head taper point screws, 250-pack. Self-piercing with 1/4″ white painted hex head. Used for registers and grilles.
#8 x 2″ white hex head taper point screws, 50-pack. Self-piercing with 1/4″ white painted hex head. For registers and grilles.
#8 x 1/2″ zinc hex head taper point screws, 100-pack. Self-piercing with 1/4″ zinc-plated hex head for sheet metal work.
#8 x 1/2″ zinc hex head taper point screws, 500-pack. Self-piercing with 1/4″ zinc-plated hex head. Bulk pack for shops and contractors.
7/8 in. refrigeration copper 45 degree elbow, long radius, cup x cup. Handles 45 degree offsets on large suction lines in commercial and higher-tonnage residential systems.
7/8″ ACR copper 90° long radius elbow (C x C). Wrot copper for brazing. Changes direction of refrigerant lines without restricting flow.
7/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.
7/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 7/8″ copper pipe in a straight line. Wrot copper for brazing.
Silver brazing rings, 7/8 in., for making brazed copper refrigerant joints. The part number indicates 25 per pack.
7/8″ x 3/4″ ACR copper reducer coupling (C x C). Connects 7/8″ and 3/4″ copper pipe directly. Wrot copper for brazing.
7/8″ x 3/4″ ACR copper reducer bushing (FTG x C). Steps down from 7/8″ fitting to 3/4″ copper pipe. Wrot copper for brazing.
7/8″ x 50′ soft copper refrigeration tubing. ACR grade — clean, dehydrated, and capped. Standard suction line for 3-5 ton residential AC systems.
12-foot twin oxy-acetylene hose set, 3/16″ diameter, Grade R, 200 PSI working pressure. Standard B-fitting connections for welding and brazing setups.
Yellow Jacket 78075 water-type manometer. Reads -2″ to 15″ W.C. for setting gas manifold pressures on natural gas and LP systems. Durable plastic construction.
11″ black cable zip ties, 50 lb tensile strength, UV-resistant nylon. Pack of 100. For bundling wires and securing components during HVAC installations.
Bulls Eye 810-C brass and stainless hose nozzle, 3/4 in GHT, 600 psi. Pin point, power and spray patterns for coil cleaning.
#8 x 1/2″ hex head sheet metal screws, 1/4″ hex drive, 1000-pack. Zinc-plated self-piercing screws for HVAC sheet metal work.
TurboTorch Extreme self-lighting replacement tip end, factory part number 0386-1065. It is the replacement tip for the PL-8A self-lighting torch tip assembly.
9158F infrared thermometer. -58 to 932 F, 12:1 distance to spot, adjustable emissivity, under one second response.
Locking refrigerant caps (2-pack, silver) for 1/4″ service valve ports. Tamper-resistant to prevent refrigerant theft and unauthorized access. Fits R-22 and R-410A.
Universal locking cap multi-key. Opens SHIELD, NOVENT, and C&D locking caps. Includes magnetic tip and valve core remover. One key for multiple lock brands.
Yellow Jacket 93266 YJII vacuum pump — 5 CFM, 2-stage, 1/2 HP. Pulls down to 25 microns. Lightweight aluminum body. Workhorse pump for residential and light commercial HVAC.