30023 – AVIATION SNIP (RIGHT)

Right-cut aviation snips for making right-hand curves and straight cuts in sheet metal, aluminum, and thin steel. You’ll typically use right-cut snips alongside a left-cut pair so you can make cuts in either direction without fighting the metal. Hardened blades and non-slip grip handles.

Specs: Right cut, hardened steel blades, non-slip handles

Replaces: 30023

Fits: Sheet metal, aluminum, and thin steel cutting for HVAC work

In stock at Open To Public HVAC Parts in Dallas. We test parts at the counter before you buy. Call or text (214) 340-9421.

Specs

• TypeCutting tool
• DetailRIGHT

What tools do I actually need to change a capacitor or a contactor?

A nut driver set, insulated screwdrivers, needle-nose pliers and a meter. That is most of the residential electrical work. Add a crimper and wire strippers if you are doing anything with terminals.

What size nut driver fits HVAC panel screws?

5/16 inch covers the large majority of panel and blower screws, with 1/4 inch second. If you buy one driver, buy 5/16.

Insulated tools - necessary or marketing?

Necessary if you are working near live terminals, which on HVAC you often are. Insulated handles are a second line of defence, not a substitute for killing power at the disconnect and confirming zero volts.

What is a fin comb for?

Straightening bent condenser fins so air can get through the coil again. Hail, weed trimmers and pressure washers all bend them, and a flattened coil quietly costs capacity all summer.

Do you stock these?

On the shelf at 10226 Plano Rd, Suite 104 in Dallas.