TB-H4-60-SOL – AVIATION SNIPS (STRAIGHT, OFFSET)

Straight-cut aviation snips with an offset handle design that keeps your hand above the sheet metal while cutting. This prevents the metal edge from digging into your fingers on long straight cuts. Forged blades and dual hand positions for comfort and control.

Specs: Straight offset cut, forged blades, dual grip positions, by ToughBuilt

Replaces: TB-H4-60-SOL, TB-H4-60-S

Fits: Sheet metal cutting for HVAC ductwork and installation

In stock at Open To Public HVAC Parts in Dallas. We test parts at the counter before you buy. Call or text (214) 340-9421.

Specs

• TypeCutting tool
• DetailSTRAIGHT, OFFSET

Cross-reference numbers

This part replaces the following OEM and aftermarket numbers:

• TB-H4-60-S

Not sure if your number matches? Call (214) 340-9421 or bring the old part in — bench-testing is free.

Fits these models

• TB-H4-60-SOL-6BES

What tools do I actually need to change a capacitor or a contactor?

A nut driver set, insulated screwdrivers, needle-nose pliers and a meter. That is most of the residential electrical work. Add a crimper and wire strippers if you are doing anything with terminals.

What size nut driver fits HVAC panel screws?

5/16 inch covers the large majority of panel and blower screws, with 1/4 inch second. If you buy one driver, buy 5/16.

Insulated tools - necessary or marketing?

Necessary if you are working near live terminals, which on HVAC you often are. Insulated handles are a second line of defence, not a substitute for killing power at the disconnect and confirming zero volts.

What is a fin comb for?

Straightening bent condenser fins so air can get through the coil again. Hail, weed trimmers and pressure washers all bend them, and a flattened coil quietly costs capacity all summer.

Do you stock these?

On the shelf at 10226 Plano Rd, Suite 104 in Dallas.