☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (512 reviews) | ¿Hablas español? | Get Directions

Air Distribution

Get air where it needs to go with our full line of air distribution products. We carry air grilles, registers, sheet metal fittings, flexible and rigid ducting, duct fans, B-vent double-wall pipe, and insulation. Whether you’re installing new ductwork, replacing a register, or sealing up leaks, we have the materials and know-how to help.All products available for walk-in pickup at our Dallas store. Need help sizing ductwork or choosing the right register? Our staff can assist. Visit us at 10226 Plano Rd or call (214) 340-9421.

Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7  |  Sat 10–3
In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.
All
Air Distribution ▼
AIR GRILLES & REGISTERSB-VENT (DOUBLEWALL)DUCT FANDUCTINGINSULATIONSHEET METAL
Electrical Components ▼
CAPACITORCIRCUIT BREAKERCONDUITCONTACTORCONTROL BOARDFAN RELAYFUSESURGE PROTECTORTIME DELAY RELAYTRANSFORMERWIRE
Equipment & Systems ▼
CONDENSATE PUMPEQUIPMENTEQUIPMENT MOUNTMINISPLIT ACCESSORIES
Filters & Air Quality ▼
AIR FILTERCHEMICALSUV LIGHT
Furnace & Heating ▼
GAS VALVEIGNITOR - FURNACE
Motors & Blower Parts ▼
BLOWER MOTORBLOWER WHEELCONDENSER MOTORFAN BLADEINDUCER MOTORMOTOR MOUNT
Refrigeration ▼
COMPRESSORDRIER - REFRIGERANTEXPANSION VALVEPISTONREFRIGERANTREVERSING VALVESERVICE VALVESIGHTGLASS
Switches & Sensors ▼
DOOR SWITCHDRAIN SAFETY SWITCHFLAME SENSORHEAT SEQUENCERLIMIT SWITCHPRESSURE SWITCH - FURNACEPRESSURE SWITCH - REFRIGERANTTHERMAL LIMIT
Thermostats & Zone Controls ▼
THERMOSTATZONE SYSTEM
Tools & Supplies ▼
1/4" SERVICE CAPADHESIVEBRAZING CONSUMABLESCEILING ACCESS PANELCOPPERFASTERNERGAS PIPEOILPLASTIC DRAIN PANPVCSERVICE DISCONNECTSUPPLIESTOOLS
All parts 1,291Equipment & Systems 67Filters & Air Quality 83Air Distribution 259Furnace & Heating 39Refrigeration 67Thermostats & Zone Controls 17Switches & Sensors 132Electrical Components 224Motors & Blower Parts 129Tools & Supplies 276
REFINESHEET METAL 119AIR GRILLES & REGISTERS 94B-VENT (DOUBLEWALL) 19DUCTING 12INSULATION 11DUCT FAN 4

Showing 49–96 of 259 results

  • In StockBOOT1267 - INSULATED REGISTER BOOT (12X6-7)
    UNIVERSAL

    BOOT1267 – INSULATED REGISTER BOOT (12X6-7)

    SKU · 641R6127
    $21.97

    Insulated galvanized register boot, 12×6 opening with 7″ round duct connection. Internally lined to reduce condensation and noise. Fits standard 12×6 floor or wall registers.

  • Low StockBOOT1268 - INSULATED REGISTER BOOT (12X6-8)
    UNIVERSAL

    BOOT1268 – INSULATED REGISTER BOOT (12X6-8)

    SKU · 641R66128
    $21.47

    Insulated galvanized register boot, 12×6 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Fits standard 12×6 floor or wall registers.

  • In StockBOOT1288 - INSULATED REGISTER BOOT (12X8-8)
    UNIVERSAL

    BOOT1288 – INSULATED REGISTER BOOT (12X8-8)

    SKU · 641R8128
    $24.65

    Insulated galvanized register boot, 12×8 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Fits standard 12×8 floor or wall registers.

  • In StockBOOT141414 - UNINSULATED BOOT
    UNIVERSAL

    BOOT141414 – UNINSULATED BOOT

    SKU · BOOT141414
    $40.81

    Uninsulated galvanized register boot, 14×14 opening with 14″ round duct connection. Solid galvanized steel for unconditioned spaces or commercial high-airflow applications.

  • In StockBOOT1468 - INSULATED REGISTER BOOT (14X6-8)
    UNIVERSAL

    BOOT1468 – INSULATED REGISTER BOOT (14X6-8)

    SKU · 641R6148
    $25.27

    Insulated galvanized register boot, 14×6 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.

  • In StockBOOT1489 - INSULATED REGISTER BOOT (14X8-9)
    UNIVERSAL

    BOOT1489 – INSULATED REGISTER BOOT (14X8-9)

    SKU · 641R8149
    $26.29

    Insulated galvanized register boot, 14×8 opening with 9″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.

  • In StockBOOT845 - INSULATED REGISTER BOOT (8X4-5)
    UNIVERSAL

    BOOT845 – INSULATED REGISTER BOOT (8X4-5)

    SKU · 641R485
    $16.60

    Insulated galvanized register boot, 8×4 opening with 5″ round duct connection. Internally lined to reduce condensation and noise. Compact size for smaller registers.

  • In StockBOOTRAIL - EACH
    UNIVERSAL

    BOOTRAIL – EACH

    SKU · BOOT RAILS
    $0.96

    Galvanized steel boot rail, sold individually. Used to mount register boots to floor joists in HVAC duct installations. Simple L-shaped support bracket.

  • In StockCIT3434 - COATED LINE INSULATION (3/4 ID x 3/4 WALL x 6 T, VELCRO UV JACKET)
    UNIVERSAL

    CIT3434 – COATED LINE INSULATION (3/4″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)

    SKU · CIT3434
    $16.38

    UV-coated pipe insulation, 3/4″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 3/4″ copper line.

  • In StockCIT7834 - COATED LINE INSULATION (3/4 ID x 3/4 WALL x 6 T, VELCRO UV JACKET)
    UNIVERSAL

    CIT7834 – COATED LINE INSULATION (7/8″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)

    SKU · CIT7834
    $19.00

    UV-coated pipe insulation, 7/8″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 7/8″ copper line.

  • Low StockCP-ID7825 - INSULATED METAL SHEET (30x48)
    UNIVERSAL

    CP-ID7825 – INSULATED METAL SHEET (30″x48″)

    SKU · CP-ID7825
    $62.13

    30″x48″ insulated metal sheet, 26-gauge steel with 1/2″ insulation liner (R-2). Use for building or patching plenums and ductwork. Cut to size with tin snips.

  • In StockDB-R4 - DUCTBOARD (4'X10 - 1)
    UNIVERSAL

    DB-R4 – DUCTBOARD (4’X10′ – 1″)

    SKU · 90005697
    $71.67

    R-4 ductboard sheet, 1″ thick, 4’x10′. Fiberglass board with foil facing used to build or repair duct systems. Owens Corning 703-type. Cut and fold to make your own ductwork.

  • In StockDB-R6 - DUCTBOARD (4'x10 - 1.5)
    UNIVERSAL

    DB-R6 – DUCTBOARD (4’x10′ – 1.5″)

    SKU · 196441723
    $83.36

    R-6 ductboard sheet, 1.5″ thick, 4’x10′. Fiberglass board with foil facing for building or repairing duct systems. Higher insulation than R-4 for attics and unconditioned spaces.

  • Low StockDF9006 - DUCT FAN (120V, 6)
    UNIVERSAL

    DF9006 – DUCT FAN (120V, 6″)

    SKU · DF9006
    $66.86

    6-inch inline duct booster fan, 120V. Boosts airflow in a weak duct run. Installs inside round ductwork to push more air to rooms that don’t get enough.

  • Low StockDF9008 - DUCT FAN (120V, 8)
    UNIVERSAL

    DF9008 – DUCT FAN (120V, 8″)

    SKU · DF9008
    $76.17

    8-inch inline duct booster fan, 120V. Boosts airflow in a weak duct run. Installs inside round ductwork to push more air to rooms that don’t get enough.

  • Low StockDF9010 - DUCT FAN (120V, 10)
    UNIVERSAL

    DF9010 – DUCT FAN (120V, 10″)

    SKU · DF9010
    $108.77

    10-inch inline duct booster fan, 120V. Boosts airflow in a weak duct run. Installs inside round ductwork to push more air to rooms that don’t get enough.

  • Low StockDF9012 - DUCT FAN (120V, 12)
    UNIVERSAL

    DF9012 – DUCT FAN (120V, 12″)

    SKU · DF9012
    $130.86

    12-inch inline duct booster fan, 120V. Boosts airflow in a weak duct run. Installs inside round ductwork to push more air to rooms that don’t get enough.

  • Low StockDFP1625 - FILTER PLENUM
    UNIVERSAL

    DFP1625 – FILTER PLENUM

    SKU · DFP1625
    $128.12

    Insulated filter plenum, 16″ x 25″ opening, 30″ long. Attaches to your furnace or air handler and holds up to a 4″ filter. R-6 lined interior.

  • Low StockDFP2020 - FILTER PLENUM
    UNIVERSAL

    DFP2020 – FILTER PLENUM

    SKU · DFP2020
    $127.20

    Insulated filter plenum, 20″ x 20″ opening, 30″ long. Attaches to your furnace or air handler and holds up to a 4″ filter. R-6 lined interior.

  • Low StockDFP2025 - FILTER PLENUM (DOOR ON 20)
    UNIVERSAL

    DFP2025 – FILTER PLENUM (DOOR ON 20″)

    SKU · DFP2025
    $132.54

    Insulated filter plenum, 20″ x 25″ opening, door on 20″ side, 30″ long. Attaches to furnace or air handler. Holds up to a 4″ filter. R-6 lined.

  • Low StockDFP2520 - FILTER PLENUM (DOOR ON 25)
    UNIVERSAL

    DFP2520 – FILTER PLENUM (DOOR ON 25″)

    SKU · 046R62520
    $142.57

    Insulated filter plenum, 20″ x 25″ opening, door on 25″ side, 30″ long. Attaches to furnace or air handler. Holds up to a 4″ filter. R-6 lined.

  • In StockDP1444 - DRAIN PAN (DRAIN ON 14)
    UNIVERSAL

    DP1444 – DRAIN PAN (DRAIN ON 14″)

    SKU · 0601444
    $33.78

    Galvanized secondary drain pan, 14″ x 44″, with drain on the 14″ side. Sits under your indoor coil or air handler to catch overflow if the primary drain clogs.

  • Low StockDP3030 - DRAIN PAN
    UNIVERSAL

    DP3030 – DRAIN PAN

    SKU · 0603030
    $41.86

    Galvanized secondary drain pan, 30″ x 30″. Sits under your indoor coil or air handler to catch overflow if the primary drain clogs. Prevents water damage.

  • In StockDP3531 - DRAIN PAN (DRAIN ON 35)
    UNIVERSAL

    DP3531 – DRAIN PAN (DRAIN ON 35″)

    SKU · 060L3135
    $28.64

    Galvanized secondary drain pan, 35″ x 31″, with drain on the 35″ (long) side. Catches overflow under your indoor coil or air handler if the primary drain clogs.

  • Out of StockDP3636 - DRAIN PAN
    UNIVERSAL

    DP3636 – DRAIN PAN

    SKU · 0603636
    $47.59

    Galvanized secondary drain pan, 36″ x 36″. Sits under your indoor coil or air handler to catch overflow if the primary drain clogs. Fits 3- to 4-ton units.

  • Low StockDP6030 - DRAIN PAN (DRAIN ON 60)
    UNIVERSAL

    DP6030 – DRAIN PAN (DRAIN ON 60″)

    SKU · DP6030
    $54.88

    Galvanized secondary drain pan, 60″ x 30″, with drain on the 60″ (long) side. Catches overflow under your indoor coil or air handler. Fits 4- to 5-ton units.

  • Low StockDW34NC - FLUE PIPE (3 to 4)
    UNIVERSAL

    DW34NC – FLUE PIPE (3″ to 4″)

    SKU · DW34NC
    $20.12

    3-inch to 4-inch double-wall flue pipe increaser for Type B gas vent. Transitions from a 3″ appliance outlet to a 4″ vent run. ECCO Manufacturing 200358.

  • In StockDW45NC - FLUE PIPE (4 to 5)
    UNIVERSAL

    DW45NC – FLUE PIPE (4″ to 5″)

    SKU · 200458
    $18.42

    4-inch to 5-inch double-wall flue pipe increaser for Type B gas vent. Transitions from 4″ to 5″ vent pipe. ECCO Manufacturing 200458. Aluminum/galvanized construction.

  • Low StockDW46NC - FLUE PIPE (4 to 6)
    UNIVERSAL

    DW46NC – FLUE PIPE (4″ to 6″)

    SKU · 200459
    $19.36

    4-inch to 6-inch double-wall flue pipe increaser for Type B gas vent. Transitions from 4″ to 6″ vent pipe. ECCO Manufacturing 200459. Aluminum/galvanized construction.

  • In StockDW490 - FLUE PIPE (4 ELBOW)
    UNIVERSAL

    DW490 – FLUE PIPE (4″ ELBOW)

    SKU · 200414
    $23.99

    4-inch double-wall 90-degree elbow for Type B gas vent. Changes vent direction by 90 degrees. ECCO Manufacturing 200414. Aluminum inner, galvanized outer.

  • In StockDW4AFLASH - FLASHING (1/12 to 7/12)
    UNIVERSAL

    DW4AFLASH – FLASHING (4″, 1/12 to 7/12)

    SKU · 200408-EC
    $16.66

    4-inch adjustable roof flashing for Type B gas vent. Fits roof pitches from 1/12 to 7/12 (low to moderate slope). ECCO Manufacturing 200408. Keeps water out at the penetration.

  • In StockDW4CAP - ROOF CAP (4)
    UNIVERSAL

    DW4CAP – ROOF CAP (4″)

    SKU · 200406
    $16.84

    4-inch double-wall rain cap for Type B gas vent. Keeps rain, debris, and animals out of the vent termination. ECCO Manufacturing 200406. Galvanized steel.

  • In StockDW4DHC - FLUE PIPE (4 DRAFT HOOD CONNECTOR)
    UNIVERSAL

    DW4DHC – FLUE PIPE (4″ DRAFT HOOD CONNECTOR)

    SKU · 200415
    $9.25

    4-inch double-wall draft hood connector for Type B gas vent. Connects the appliance draft hood to the vent system. ECCO Manufacturing 200415.

  • Low StockDW4FAD - FLUE PIPE (4 ADAPTOR)
    UNIVERSAL

    DW4FAD – FLUE PIPE (4″ ADAPTOR)

    SKU · DW4FAD
    $21.67

    4-inch double-wall female sleeve adapter for Type B gas vent. Connects B-vent pipe to appliances. ECCO Manufacturing 200473. Also listed as 4M6AF.

  • In StockDW4HPFLASH - FLASHING (4, 8/12 to 12/12)
    UNIVERSAL

    DW4HPFLASH – FLASHING (4″, 8/12 to 12/12)

    SKU · 200428-EC
    $21.70

    4-inch adjustable roof flashing for Type B gas vent. Fits roof pitches from 8/12 to 12/12 (steep slope). ECCO Manufacturing 200428. For steep roofs only.

  • In StockDW4SC - STORM COLLAR (4)
    UNIVERSAL

    DW4SC – STORM COLLAR (4″)

    SKU · 4SSC
    $4.66

    4-inch double-wall storm collar for Type B gas vent. Seals the gap where the vent pipe passes through the roof. ECCO Manufacturing 200490. Galvanized steel.

  • In StockDW4X12 - SOLID FLUE PIPE (4x12) *NOT ADJUSTABLE*
    UNIVERSAL

    DW4X12 – SOLID FLUE PIPE (4″ x 12″) *NOT ADJUSTABLE*

    SKU · 200404
    $9.60

    4-inch x 12-inch solid (non-adjustable) Type B gas vent pipe. Double-wall with aluminum inner liner and galvanized outer. ECCO Manufacturing 200404. Fixed 12″ length.

  • In StockDW4X12ADJ - FLUE PIPE (4x12) *NOT SOLID*
    UNIVERSAL

    DW4X12ADJ – FLUE PIPE (4″ x 12″) *NOT SOLID*

    SKU · 200405
    $12.26

    4-inch adjustable Type B gas vent pipe, extends 4 to 10 inches. Double-wall with aluminum inner and galvanized outer. ECCO Manufacturing 200405. Telescopes to fit.

  • In StockDW4X24 - SOLID FLUE PIPE (4 to 24)
    UNIVERSAL

    DW4X24 – SOLID FLUE PIPE (4″ x 24″)

    SKU · 200452
    $14.90

    4-inch x 24-inch solid Type B gas vent pipe. Double-wall with aluminum inner liner and galvanized outer. ECCO Manufacturing 200452. Fixed 24″ length.

  • In StockDW4X36 - SOLID FLUE PIPE (4 x 36)
    UNIVERSAL

    DW4X36 – SOLID FLUE PIPE (4″ x 36″)

    SKU · 200402
    $20.50

    4-inch x 36-inch solid Type B gas vent pipe. Double-wall with aluminum inner liner and galvanized outer. ECCO Manufacturing 200402. Fixed 3-foot length.

  • In StockDW4X36CON - FLEXIBLE FLUE PIPE (4 x 36)
    UNIVERSAL

    DW4X36CON – FLEXIBLE FLUE PIPE (4″ x 36″)

    SKU · 200493
    $53.80

    4-inch x 36-inch flexible gas vent connector. Double-wall with aluminum inner and galvanized outer. ECCO Manufacturing 200493. Bends to fit tight spaces.

  • In StockDW4X48 - SOLID FLUE PIPE (4 x 48)
    UNIVERSAL

    DW4X48 – SOLID FLUE PIPE (4″ x 48″)

    SKU · 200450
    $26.77

    4-inch x 48-inch solid Type B gas vent pipe. Double-wall with aluminum inner liner and galvanized outer. ECCO Manufacturing 200450. Fixed 4-foot length.

  • In StockDW4X60 - SOLID FLUE PIPE (4 x 60)
    UNIVERSAL

    DW4X60 – SOLID FLUE PIPE (4″ x 60″)

    SKU · 200401
    $34.72

    4-inch x 60-inch solid Type B gas vent pipe. Double-wall with aluminum inner liner and galvanized outer. ECCO Manufacturing 200401. Fixed 5-foot length.

  • Low StockDW4X60CON - FLEXIBLE FLUE PIPE (4 x 60)
    UNIVERSAL

    DW4X60CON – FLEXIBLE FLUE PIPE (4″ x 60″)

    SKU · 200495
    $83.87

    4-inch x 60-inch flexible gas vent connector. Double-wall with aluminum inner and galvanized outer. ECCO Manufacturing 200495. Extra length for difficult runs.

  • Low StockDW56NC - FLUE PIPE (5 to 6 INCREASER)
    UNIVERSAL

    DW56NC – FLUE PIPE (5″ to 6″ INCREASER)

    SKU · DW56NC
    $26.52

    5-inch to 6-inch double-wall flue pipe increaser for Type B gas vent. Transitions from 5″ to 6″ vent pipe. ECCO Manufacturing 210558. Aluminum/galvanized construction.

  • Low StockEAFHE1620-2 - FILTER BASE (16W x 20D - 1 FILTER, ELECTRIC)
    UNIVERSAL

    EAFHE1620-2 – FILTER BASE (16″W x 20″D – 1″ FILTER, ELECTRIC)

    SKU · EZ-1620-FC
    $82.71

    EAFHE1620-2 filter base for electric air handlers, 16×20 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.

  • In StockEAFHE1620-6 - FILTER BASE (16W x 20D - 1, 2, or 4 FILTER, ELECTRIC)
    UNIVERSAL

    EAFHE1620-6 – FILTER BASE (16″W x 20″D – 1″, 2″, or 4″ FILTER, ELECTRIC)

    SKU · ACE1620-6
    $91.56

    EAFHE1620-6 filter base for electric air handlers, 16×20 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.

  • Low StockEAFHE2020-2 - FILTER BASE (20 x 20 - 1 FILTER, ELECTRIC)
    UNIVERSAL

    EAFHE2020-2 – FILTER BASE (20″ x 20″ – 1″ FILTER, ELECTRIC)

    SKU · EZ-2020-FC
    $84.23

    EAFHE2020-2 filter base for electric air handlers, 20×20 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.

Showing 96 of 259 parts
Call (214) 340-9421