📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (512 reviews) | ¿Hablas español? | Get Directions

SHEET METAL

This is where you can browse products in this store.

Product images are representative. Always verify compatibility with your model number before visiting us in store.

Need help finding the right part?

We test parts at the counter and match the right replacement. Walk in or call ahead.

☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7 | Sat 10–3

In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.

All parts 1,291 Equipment & Systems 67 Filters & Air Quality 83 Air Distribution 259 Furnace & Heating 39 Refrigeration 67 Thermostats & Zone Controls 17 Switches & Sensors 132 Electrical Components 224 Motors & Blower Parts 129 Tools & Supplies 276

REFINEFILTER BASE 17 REGISTER BOOT 17 REDUCER 17 START COLLAR 11 FLEX DUCT COUPLING 11 DAMPER 10 WYE 10 PLENUM 9 SECONDARY DRAIN PAN 5 FILTER PLENUM 4 HANGING STRAP 2 DUCT SADDLE 2 LINE SET COVER 2 BOOT RAIL 1

Showing 1–48 of 119 results

In Stock
FLEX DUCT COUPLING
FDC06 – DUCT COUPLING
SKU · 5856
$3.61
6″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
Low Stock
FILTER BASE
EAFHE2020-2 – FILTER BASE (20″ x 20″ – 1″ FILTER, ELECTRIC)
SKU · EZ-2020-FC
$84.23
EAFHE2020-2 filter base for electric air handlers, 20×20 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.
In Stock
DAMPER
30014 – DAMPER (14″ W/ KEY)
SKU · SHMD2H14
$10.79
14″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.
In Stock
DAMPER
30007 – DAMPER (7″ W/ KEY)
SKU · SHMD2HW
$5.09
7″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.
In Stock
SHEET METAL
FS7 – START COLLAR
SKU · 5257
$3.18
7″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
Low Stock
REDUCER
4000706 – REDUCER
SKU · 40067
$10.24
Galvanized duct reducer, 7″ to 6″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
Low Stock
PLENUM
16X21X36R6 – PLENUM
SKU · 08726162136
$111.38
16″ x 21″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Lined with fiberglass insulation to reduce noise and condensation.
In Stock
SHEET METAL
WYE977
SKU · 850977
$22.43
9″ x 7″ x 7″ galvanized duct wye. Reduces a 9″ trunk into two 7″ branch ducts. Standard fitting for residential HVAC ductwork.
In Stock
DUCT SADDLE
FDS20 – FLEX DUCT SADDLE (20″)
SKU · 072620
$2.18
20″ galvanized flex duct saddle. Supports and cradles round flex duct to prevent sagging and kinking. Simple strap design for quick installation.
In Stock
SHEET METAL
WYE1088
SKU · 8501088
$22.43
10″ x 8″ x 8″ galvanized duct wye. Reduces a 10″ trunk into two 8″ branch ducts. Standard fitting for residential HVAC ductwork.
In Stock
REDUCER
4000605 – REDUCER
SKU · 40056
$9.09
Galvanized duct reducer, 6″ to 5″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
Low Stock
FILTER BASE
0511625 – REX RACK
SKU · 0511625
$69.89
Rex Rack filter rack, 16×25. Mounts between ductwork and your air handler or furnace for horizontal installations. Holds a standard 16×25 filter. Built-in duct flange.
In Stock
REDUCER
4001410 – REDUCER
SKU · 4001014
$14.96
Galvanized duct reducer, 14″ to 10″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
In Stock
SHEET METAL
WYE444
SKU · 800040404
$20.31
4″ x 4″ x 4″ galvanized duct wye. Splits one 4″ round duct into two equal 4″ branches. Standard fitting for residential HVAC ductwork.
Low Stock
FILTER BASE
EAFHE2020-6 – FILTER BASE (20″ x 20″ -1″, 2″, or 4″ FILTER, ELECTRIC)
SKU · EZ-2020-FCS
$94.91
EAFHE2020-6 filter base for electric air handlers, 20×20 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
In Stock
SHEET METAL
FS18 – START COLLAR
SKU · 52518
$6.18
18″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
Low Stock
PLENUM
24X21X36R6 – PLENUM
SKU · 08726212436
$123.56
24″ x 21″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to reduce condensation and duct noise.
Low Stock
FILTER BASE
F100F2020/U – FILTER RACK (20″ x 20″)
SKU · F100F2020/U
$132.00
Honeywell F100F2020/U media air cleaner, 20×20. MERV 11 rated, captures particles down to 0.3 microns. 1,400 CFM capacity. Whole-house filtration upgrade.
In Stock
FLEX DUCT COUPLING
FDC14 – DUCT COUPLING
SKU · 58514
$5.45
14″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
In Stock
DAMPER
30005 – DAMPER (5″ W/ KEY)
SKU · SHMD2HS
$6.43
5″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.
Out of Stock
PLENUM
25X22X36R6 – PLENUM
SKU · 08726252236
$123.56
25″ x 22″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to reduce condensation and noise.
Out of Stock
PLENUM
16.5X11.5X36R6 – PLENUM
SKU · 0872611416436
$95.70
16.5″ x 11.5″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to reduce condensation and noise.
Low Stock
FILTER BASE
EAFHE1620-2 – FILTER BASE (16″W x 20″D – 1″ FILTER, ELECTRIC)
SKU · EZ-1620-FC
$82.71
EAFHE1620-2 filter base for electric air handlers, 16×20 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.
In Stock
FLEX DUCT COUPLING
FDC20 – DUCT COUPLING
SKU · FDC20
$9.16
20″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
Low Stock
PLENUM
23.5X11.5X36R – PLENUM
SKU · 0872611423436
$103.63
23.5″ x 11.5″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to cut noise and prevent sweating.
In Stock
DAMPER
30016 – DAMPER (16″ W/ KEY)
SKU · SHMD2H16
$12.83
16″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.
In Stock
FILTER BASE
EAFHG1425-6 – FILTER BASE (14″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
SKU · EZ-1425S
$91.56
EAFHG1425-6 filter base for gas furnaces, 14×25 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
Low Stock
REGISTER BOOT
RABOX-1625 – RETURN AIR BOX – DUCT BOARD TOP
SKU · RABOX-1625
$43.34
Insulated return air box, 16×25 opening with ductboard top. Connects return grilles to round ductwork — cut the top on-site to match your duct size. Galvanized steel.
In Stock
SHEET METAL
FS6 – START COLLAR
SKU · 5256
$3.08
6″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
In Stock
SHEET METAL
FS14 – START COLLAR
SKU · 52514
$5.09
14″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
In Stock
REGISTER BOOT
BOOT1288 – INSULATED REGISTER BOOT (12X8-8)
SKU · 641R8128
$24.65
Insulated galvanized register boot, 12×8 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Fits standard 12×8 floor or wall registers.
Low Stock
FILTER BASE
EAFHG2025-6 – FILTER BASE (20″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
SKU · EZ-2025S
$94.91
EAFHG2025-6 filter base for gas furnaces, 20×25 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
In Stock
REGISTER BOOT
BOOT845 – INSULATED REGISTER BOOT (8X4-5)
SKU · 641R485
$16.60
Insulated galvanized register boot, 8×4 opening with 5″ round duct connection. Internally lined to reduce condensation and noise. Compact size for smaller registers.
In Stock
FLEX DUCT COUPLING
FDC09 – DUCT COUPLING
SKU · 5859
$4.25
9″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
Low Stock
REDUCER
4000705 – REDUCER
SKU · 40057
$10.28
Galvanized duct reducer, 7″ to 5″. Transitions between two different round duct sizes in a supply or return run. Crimped end for easy connection.
In Stock
FLEX DUCT COUPLING
FDC10 – DUCT COUPLING
SKU · 58510
$4.45
10″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.
In Stock
SHEET METAL
FS12 – START COLLAR
SKU · 52512
$4.26
12″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
In Stock
DAMPER
30012 – DAMPER (12″ W/ KEY)
SKU · SHMD2H12
$8.39
12″ round duct damper with key handle. Controls airflow to individual rooms by opening or closing the damper blade. Galvanized steel.
In Stock
REGISTER BOOT
BOOT1489 – INSULATED REGISTER BOOT (14X8-9)
SKU · 641R8149
$26.29
Insulated galvanized register boot, 14×8 opening with 9″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.
In Stock
FILTER BASE
EAFHE1620-6 – FILTER BASE (16″W x 20″D – 1″, 2″, or 4″ FILTER, ELECTRIC)
SKU · ACE1620-6
$91.56
EAFHE1620-6 filter base for electric air handlers, 16×20 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
In Stock
REGISTER BOOT
BOOT101010 – UNINSULATED BOOT
SKU · BOOT101010
$27.67
Uninsulated galvanized register boot, 10×10 opening with 10″ round duct connection. Solid galvanized steel construction for unconditioned spaces or commercial applications.
Low Stock
FILTER BASE
EAFHG1625-6 – FILTER BASE (16″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
$91.56
The EAFHG1625-6 Filter Base securely houses 16″ x 25″ filters in 1″, 2″, or 4″ thicknesses for gas furnaces up to 5 tons, improving air quality and system efficiency.
Low Stock
FILTER PLENUM
DFP1625 – FILTER PLENUM
SKU · DFP1625
$128.12
Insulated filter plenum, 16″ x 25″ opening, 30″ long. Attaches to your furnace or air handler and holds up to a 4″ filter. R-6 lined interior.
In Stock
FILTER BASE
0512025 – REX RACK (DOOR ON 20″)
SKU · 0512025 (20" ACCESS)
$69.62
Rex Rack filter rack, 20×25 with access door on the 20″ side. Mounts between ductwork and your air handler for horizontal installations. Holds a standard 20×25 filter.
In Stock
HANGING STRAP
RD-HS3/4 – METAL STRAP (PERFORATED, 3/4″X100′)
SKU · 99034
$14.98
Perforated galvanized metal strap (plumber’s strap), 3/4″ wide x 100-foot roll. Pre-punched holes for easy fastening. Used to hang ductwork and piping.
In Stock
SHEET METAL
FS16 – START COLLAR
SKU · 52516
$5.09
16″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
Low Stock
FILTER PLENUM
DFP2020 – FILTER PLENUM
SKU · DFP2020
$127.20
Insulated filter plenum, 20″ x 20″ opening, 30″ long. Attaches to your furnace or air handler and holds up to a 4″ filter. R-6 lined interior.
In Stock
SHEET METAL
FS5 – START COLLAR
SKU · 5255
$2.97
5″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.

Showing 48 of 119 parts

Call (214) 340-9421