☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (546 reviews) | ¿Hablas español? | Get Directions

Uncategorized

Need help finding the right part?
We test parts at the counter and match the right replacement. Walk in or call ahead.
☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7  |  Sat 10–3
In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.

Showing 529–576 of 1291 results

  • In StockBOOT1468 - INSULATED REGISTER BOOT (14X6-8)
    UNIVERSAL

    BOOT1468 – INSULATED REGISTER BOOT (14X6-8)

    SKU · 641R6148
    $25.27

    Insulated galvanized register boot, 14×6 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.

  • In StockBOOT1489 - INSULATED REGISTER BOOT (14X8-9)
    UNIVERSAL

    BOOT1489 – INSULATED REGISTER BOOT (14X8-9)

    SKU · 641R8149
    $26.29

    Insulated galvanized register boot, 14×8 opening with 9″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.

  • In StockBOOT845 - INSULATED REGISTER BOOT (8X4-5)
    UNIVERSAL

    BOOT845 – INSULATED REGISTER BOOT (8X4-5)

    SKU · 641R485
    $16.60

    Insulated galvanized register boot, 8×4 opening with 5″ round duct connection. Internally lined to reduce condensation and noise. Compact size for smaller registers.

  • In StockBOOTRAIL - EACH
    UNIVERSAL

    BOOTRAIL – EACH

    SKU · BOOT RAILS
    $0.96

    Galvanized steel boot rail, sold individually. Used to mount register boots to floor joists in HVAC duct installations. Simple L-shaped support bracket.

  • Low StockBP18-8 - THERMOSTAT WIRE ROLL (18G, 8W, 250)
    UNIVERSAL

    BP18-8 – THERMOSTAT WIRE ROLL (18G, 8W, 250′)

    SKU · TWR188
    $164.18

    18/8 thermostat wire, 250-foot roll. Eight conductors for multi-stage or heat pump systems with accessories. UV-resistant PVC jacket. Covers most residential runs.

  • In StockBPV21 - PIERCING VALVE (1/2, 5/8)
    UNIVERSAL

    BPV21 – PIERCING VALVE (1/2″, 5/8″)

    SKU · QTM-2
    $8.12

    Supco BPV21 Bullet piercing valve for 1/2″ and 5/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.

  • In StockBPV31 - PIERCING VALVE (1/4, 5/16, 3/8)
    UNIVERSAL

    BPV31 – PIERCING VALVE (1/4″, 5/16″, 3/8″)

    SKU · BPV31
    $8.11

    Supco BPV31 Bullet piercing valve for 1/4″, 5/16″, and 3/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.

  • Low StockBRD05765 - CONTROL BOARD (AMERISTAR)
    AMERICAN STANDARD

    BRD05765 – CONTROL BOARD (AMERISTAR)

    SKU · BRD5765
    $197.59

    Ameristar BRD05765 control board. OEM replacement for Ameristar air handlers. Replaces BRD04300, BRD4300, and BRD5765. Controls blower and system functions.

  • In StockBRK3 - RESETABLE FUSE (3 AMP)
    UNIVERSAL

    BRK3 – RESETABLE FUSE (3 AMP)

    SKU · BRK3
    $21.66

    Supco BRK3 resettable 3 Amp diagnostic fuse for HVAC low-voltage circuits. Built-in light shows when circuit is active. Resets instead of blowing — saves time troubleshooting.

  • Low StockBRK5 - RESETABLE FUSE (5 AMP)
    UNIVERSAL

    BRK5 – RESETABLE FUSE (5 AMP)

    SKU · BRK5
    $21.66

    Supco BRK5 resettable 5 Amp diagnostic fuse for HVAC low-voltage circuits. Built-in light shows circuit activity. Trips and resets without blowing — great for troubleshooting.

  • In StockBTG-54VL - LOCKING THERMOSTAT COVER (SOLID, METAL)
    UNIVERSAL

    BTG-54VL – LOCKING THERMOSTAT COVER (SOLID, METAL)

    SKU · BTG-54VL
    $26.61

    Metal thermostat guard with keyed lock and louvered cover. Prevents tampering in offices, rentals, and commercial spaces. Mounts over existing thermostat.

  • In StockBTG-UN - LOCKING THERMOSTAT COVER (CLEAR, PLASTIC)
    UNIVERSAL

    BTG-UN – LOCKING THERMOSTAT COVER (CLEAR, PLASTIC)

    SKU · BTG-UN
    $30.83

    Clear plastic universal thermostat guard with lock. See-through cover fits thermostats up to 7.3″ x 5.25″ x 1.8″. Vented for proper airflow.

  • In StockBW45015 - BLOWER WHEEL (1010, CW, CVX)
    UNIVERSAL

    BW45015 – BLOWER WHEEL (10″ x 10″, CW, CONVEX)

    SKU · BW45015
    $113.38

    10″ x 10″ clockwise blower wheel with convex blades and 1/2″ bore. Direct replacement for Goodman B1368047A and Rheem RBW10215. Galvanized steel construction.

  • Low StockBW54202 - BLOWER WHEEL (119, CW, CONCAVE)
    UNIVERSAL

    BW54202 – BLOWER WHEEL (11″ x 9″, CW, CONCAVE)

    SKU · 701306
    $168.79

    11″ x 9″ clockwise blower wheel with concave blades and 1/2″ bore. Cross-references Morrison BW54202. Galvanized steel construction.

  • Low StockCAP-1-AM - CEILING ACCESS PANEL (25% RESTOCKING FEE)
    UNIVERSAL

    CAP-1-AM – CEILING ACCESS PANEL (25% RESTOCKING FEE)

    SKU · CAP-1
    $127.41

    Goodman CAP-1-AM ceiling access panel. Provides access to ceiling-mounted HVAC equipment, plumbing, and electrical. Flush-mount design. 25% restocking fee applies.

  • In StockCAP-2-AM - CEILING ACCESS PANEL (25% RESTOCKING FEE)
    UNIVERSAL

    CAP-2-AM – CEILING ACCESS PANEL (25% RESTOCKING FEE)

    SKU · CAP-2
    $132.31

    Goodman CAP-2-AM ceiling access panel. Heavy-gauge galvanized steel with white epoxy coating. Surface-mount with hinged door. 25% restocking fee applies.

  • Out of StockCAP-3-AM - CEILING ACCESS PANEL (25% RESTOCKING FEE)
    UNIVERSAL

    CAP-3-AM – CEILING ACCESS PANEL (25% RESTOCKING FEE)

    SKU · CAP-3
    $136.99

    Goodman CAP-3-AM ceiling access panel. Heavy-gauge galvanized steel with white epoxy coating. Surface-mount with hinged door. Largest size. 25% restocking fee.

  • Low StockCD1454/2 - FITTING (1/4F to 1/4M WITH CORE) (2-PACK)
    UNIVERSAL

    CD1454/2 – FITTING (1/4″F to 1/4″M WITH CORE) (2-PACK)

    SKU · CD1454
    $14.44

    C&D CD1454/2 brass fitting, 2-pack. 1/4″ female flare to 1/4″ male flare with installed valve core. Adds a Schrader core to a port that doesn’t have one.

  • Low StockCD2012 - FITTING (1/4F to 1/2M)
    UNIVERSAL

    CD2012 – FITTING (1/4″F to 1/2″M)

    SKU · cd2012
    $15.23

    C&D CD2012 brass coupler. 1/4″ female flare swivel to 1/2″ male Acme with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.

  • Low StockCD2028 - FITTING (1/4M to 1/2F)
    UNIVERSAL

    CD2028 – FITTING (1/4″M to 1/2″F)

    SKU · CD2028
    $15.09

    C&D CD2028 brass adapter. 1/4″ male flare to 1/2″ female Acme swivel with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.

  • In StockCD2245 - BRASS CAP (1/4, 6/PKG)
    UNIVERSAL

    CD2245 – BRASS CAP (1/4″, 6/PKG)

    SKU · BC6
    $3.95

    C&D CD2245 brass flare caps, 6-pack. 1/4″ with neoprene O-ring seal. Replace missing or damaged caps on refrigerant service valve ports to prevent leaks.

  • Low StockCD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)
    UNIVERSAL

    CD9601/2 – TEE FITTING ([1] 1/4″F to [2] 1/4″M) (PACK OF 2)

    SKU · CD9601
    $19.20

    C&D CD9601/2 brass tee fitting, 2-pack. 1/4″ female flare with depressor to two 1/4″ male flare ports (one with valve core). Adds a branch access point to refrigerant lines.

  • Low StockCESO110057-02 - CONTROL BOARD (CARRIER, AFTERMARKET, DIRECT, ICM281)
    UNIVERSAL

    CESO110057-02 – CONTROL BOARD (CARRIER, AFTERMARKET, DIRECT, 50M56D-751)

    SKU · CESO110057-00, CESO110057-01, CESO110057-02
    $199.92

    Carrier CESO110057-02 control board (ICM281C / 50M56D-751 aftermarket). Fits Carrier single-stage furnaces. Replaces all CESO110057 revisions.

  • In StockCHIPBRUSH2 - DISPOSABLE CHIP BRUSH (2 BRISTLE)
    UNIVERSAL

    CHIPBRUSH2 – DISPOSABLE CHIP BRUSH (2″ WIDE, SHORT)

    SKU · CHIPBRUSH2
    $1.04

    2″ disposable chip brush with natural bristles and wood handle. Use it to apply PVC glue, clean coils, brush away debris, or spread sealant. Single-use and cheap.

  • In StockCIT3434 - COATED LINE INSULATION (3/4 ID x 3/4 WALL x 6 T, VELCRO UV JACKET)
    UNIVERSAL

    CIT3434 – COATED LINE INSULATION (3/4″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)

    SKU · CIT3434
    $16.38

    UV-coated pipe insulation, 3/4″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 3/4″ copper line.

  • In StockCIT7834 - COATED LINE INSULATION (3/4 ID x 3/4 WALL x 6 T, VELCRO UV JACKET)
    UNIVERSAL

    CIT7834 – COATED LINE INSULATION (7/8″ ID x 3/4″ WALL x 6′ T, VELCRO UV JACKET)

    SKU · CIT7834
    $19.00

    UV-coated pipe insulation, 7/8″ ID x 3/4″ wall, 6-foot stick with Velcro seam. UV-resistant jacket for outdoor use. Fits 7/8″ copper line.

  • In StockCNT03797 - CONTROL BOARD (TRANE, 120V, AFTERMARKET, DIRECT, 50A55-3797)
    UNIVERSAL

    CNT03797 – CONTROL BOARD (TRANE, 120V, AFTERMARKET, DIRECT, 50A55-3797)

    SKU · CNT03797
    $195.26

    Trane CNT03797 control board (50A55-3797 aftermarket). 120V integrated furnace control for Trane and American Standard systems. Replaces dozens of CNT numbers.

  • Low StockCNT05001 - DEFROST CONTROL BOARD (OEM, TRANE)
    TRANE

    CNT05001 – DEFROST CONTROL BOARD (OEM, TRANE)

    SKU · CNT05001
    $150.77

    Trane CNT05001 defrost control board for heat pumps. Controls defrost cycle timing to prevent frost buildup on outdoor coil. OEM Trane part.

  • In StockCNT05165 - CONTROL BOARD (TRANE, 80V HSI, AFTERMARKET, DIRECT, 50A65-5165)
    UNIVERSAL

    CNT05165 – CONTROL BOARD (TRANE, 80V HSI, AFTERMARKET, DIRECT, 50A65-5165)

    SKU · CNT05165
    $195.70

    Trane CNT05165 control board (50A65-5165 aftermarket). 80V HSI integrated furnace control for Trane and American Standard systems. Replaces CNT03076 and more.

  • Low StockCNT05482 - DEFROST CONTROL BOARD (OEM, TRANE)
    TRANE

    CNT05482 – DEFROST CONTROL BOARD (OEM, TRANE)

    SKU · CNT5482
    $149.63

    Trane CNT05482 defrost control board for heat pumps. Controls defrost cycle timing to prevent frost buildup on outdoor coil. OEM Trane part.

  • Low StockCNT07737 - CONTROL BOARD (OEM, TRANE, CONSTANT TORQUE)
    TRANE

    CNT07737 – CONTROL BOARD (OEM, TRANE, CONSTANT TORQUE)

    SKU · CNT7737
    $220.14

    Trane CNT07737 OEM control board for furnaces with constant torque motors. Replaces CNT04711. Fits TUD1C series and similar Trane/American Standard models.

  • Low StockCNT07639 - CONTROL BOARD (OEM, TRANE, S8X1 SERIES)
    TRANE

    CNT09646 – CONTROL BOARD (OEM, TRANE, S8X1 SERIES)

    SKU · CNT07639
    $207.23

    Trane CNT09646 (replaces CNT07639, CNT07872) OEM control board for S8X1 series furnaces. Manages ignition, blower, and system safety for Trane furnaces.

  • Low StockCNT07940 - CONTROL BOARD (OEM, TRANE, A801X)
    TRANE

    CNT09648 – CONTROL BOARD (OEM, TRANE, A801X)

    SKU · CNT09648
    $179.88

    Trane CNT09648 OEM control board for A801X series furnaces. Replaces earlier CNT07940 revision. Full system management with LED diagnostic codes.

  • In StockCO-1 - ZOOM SPOUT LUBRICATING OIL (4 OZ)
    UNIVERSAL

    CO-1 – ZOOM SPOUT LUBRICATING OIL (4 OZ)

    SKU · MO98
    $8.78

    DiversiTech CO-1 Zoom Spout lubricating oil, 4 oz. Telescoping spout extends up to 14 inches for hard-to-reach spots. General-purpose lubricant for HVAC and mechanical work.

  • Low StockCOIL-SHF-FA4 - SOLENOID COIL
    UNIVERSAL

    COIL-SHF-FA4 – SOLENOID COIL

    SKU · COIL-SHF-FA4
    $33.05

    24VAC solenoid coil for Sanhua SHF-series reversing valves. Controls the reversing valve on heat pump systems to switch between heating and cooling. Spade terminals.

  • In StockCOILBRUSH - COIL BRUSH
    UNIVERSAL

    COILBRUSH – COIL BRUSH

    SKU · COILBRUSH
    $4.00

    3″ nylon coil brush for cleaning condenser and evaporator coils. Loosens dirt, dust, and debris between fins without bending them. Basic HVAC maintenance tool.

  • In StockCOSOOS - UV FLASHLIGHT
    UNIVERSAL

    COSOOS – UV FLASHLIGHT

    SKU · FLASH LIGHT
    $19.95

    COSOOS UV flashlight with 6 light modes. USB-rechargeable, aluminum body, telescoping focus lens. UV mode finds refrigerant leaks and mold fast.

  • Low StockCP-ID7825 - INSULATED METAL SHEET (30x48)
    UNIVERSAL

    CP-ID7825 – INSULATED METAL SHEET (30″x48″)

    SKU · CP-ID7825
    $62.13

    30″x48″ insulated metal sheet, 26-gauge steel with 1/2″ insulation liner (R-2). Use for building or patching plenums and ductwork. Cut to size with tin snips.

  • Out of StockCP-MWP - MINISPLIT WEDGE CONDENSATE PUMP
    UNIVERSAL

    CP-MWP – MINISPLIT WEDGE CONDENSATE PUMP

    SKU · CP-MWP
    $91.01

    Everwell mini-split condensate pump with wedge design for tight spaces. Quiet operation, 65-foot max lift. Made specifically for ductless mini-split installations.

  • In StockCT-122 - SERVICE RATCHET WRENCH
    UNIVERSAL

    CT-122 – SERVICE RATCHET WRENCH

    SKU · CT-122
    $10.95

    CT-122 service ratchet wrench by Everwell. Four sizes in one chrome-plated tool with reversible ratchet. Built for HVAC valve and fitting work.

  • In StockCT-14516 - MINISPLIT ADAPTOR (5/16F to 1/4M)
    UNIVERSAL

    CT-14516 – MINISPLIT ADAPTOR (5/16″F to 1/4″M)

    SKU · ADAPTER410
    $14.43

    Mini-split adapter — 5/16″ female to 1/4″ male. Connects standard 1/4″ gauge hoses to R-410A mini-split service ports. Brass with quick coupler and depressor pin.

  • In StockCT-501 - INSPECTION MIRROR
    UNIVERSAL

    CT-501 – INSPECTION MIRROR

    SKU · CT-501
    $7.86

    Everwell CT-501 telescopic inspection mirror with 360° swivel and chrome finish. Extends to see behind equipment and inside ductwork. Pocket-sized for field use.

  • In StockCT-503 - MAGNETIC TELESCOPING RETRIEVAL TOOL
    UNIVERSAL

    CT-503 – MAGNETIC TELESCOPING RETRIEVAL TOOL

    SKU · CT-503
    $6.71

    Everwell CT-503 telescoping magnetic retrieval tool. Extends up to 25″ with a strong magnetic head for grabbing dropped screws, bolts, and small parts. Pocket clip included.

  • Low StockD258 - DOUBLE SHAFT BLOWER MOTOR (1/5-1/10 HP, 1550RPM, 230V)
    UNIVERSAL

    D258 – DOUBLE SHAFT BLOWER MOTOR (1/5-1/10 HP, 1550 RPM, 230V)

    SKU · D258
    $189.72

    Fasco D258 double-shaft blower motor. 1/5 to 1/10 HP, 1550 RPM, 208-230V. 5-inch diameter with resilient ring mount, sleeve bearings, and auto overload protection.

  • Low StockD337 - DOUBLE SHAFT BLOWER MOTOR (1/8, 1550, 4SPD, 115V, M5)
    UNIVERSAL

    D337 – DOUBLE SHAFT BLOWER MOTOR (1/8 HP, 1550 RPM, 4-SPD, 115V, M5)

    SKU · D337
    $235.34

    Fasco D337 double-shaft blower motor. 1/8 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount. Fits wall heaters, fan coils, and small units.

  • Low StockD338 - DOUBLE SHAFT BLOWER MOTOR (1/6, 1550, 4SPD, 115V)
    UNIVERSAL

    D338 – DOUBLE SHAFT BLOWER MOTOR (1/6 HP, 1550 RPM, 4-SPD, 115V)

    SKU · D338
    $226.58

    Fasco D338 double-shaft blower motor. 1/6 HP, 4-speed, 1550 RPM, 115V. 4.4-inch diameter with resilient ring mount and auto overload protection. Fits fan coils and PTACs.

  • Low StockD6723311S - BLOWER WHEEL (1110, CW, CONVEX)
    UNIVERSAL

    D6723311S – BLOWER WHEEL (11×10, CW, CONVEX)

    SKU · D6723311S
    $137.22

    11″ x 10″ clockwise blower wheel with convex blades and 1/2″ bore. OEM Goodman part. Also replaces B1368000S and Carrier LA22ZA127.

  • In StockDB-R4 - DUCTBOARD (4'X10 - 1)
    UNIVERSAL

    DB-R4 – DUCTBOARD (4’X10′ – 1″)

    SKU · 90005697
    $73.73

    R-4 ductboard sheet, 1″ thick, 4’x10′. Fiberglass board with foil facing used to build or repair duct systems. Owens Corning 703-type. Cut and fold to make your own ductwork.

Showing 576 of 1291 parts
Call (214) 340-9421