62-24164-01 – SPARK IGNITOR (ROUND PIN, RHEEM)
Rheem OEM direct spark ignitor with round pin connector. Part 62-24164-01. For Rheem/Ruud furnaces with spark ignition (not hot surface).
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 61–70 of 1291 results

Rheem OEM direct spark ignitor with round pin connector. Part 62-24164-01. For Rheem/Ruud furnaces with spark ignition (not hot surface).

55+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.

9″ x 7″ x 7″ galvanized duct wye. Reduces a 9″ trunk into two 7″ branch ducts. Standard fitting for residential HVAC ductwork.

Rheem RA14AZ30AJ1NA 2.5-ton AC condenser. 14.3 SEER2, R-410A, single-stage scroll compressor. Pre-charged refrigerant. 10-year registered warranty.

TurboTorch TDLX2003MC self-lighting torch kit for brazing and soldering. Works with 10 cu ft acetylene tanks. Includes regulator, hose, handle, and tip — ready to use out of the box.

Insulated galvanized register boot, 14×6 opening with 8″ round duct connection. Internally lined to reduce condensation and noise. Larger size for high-airflow rooms.

Goodman B1796630 / BT1369063 90-degree stub elbow fitting. Connects the piston assembly to the refrigerant line. OEM Goodman/Amana part.

UEi ATL55 test leads, 42-inch, CAT III 1000V rated. Right-angle banana plugs with screw-on insulated alligator clips. Replacement leads for multimeters and clamp meters.

20″W x 14″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

8″ galvanized round duct coupling. Connects two pieces of flex duct together or joins flex duct to a metal collar. Standard slip-fit connection.