☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (546 reviews) | ¿Hablas español? | Get Directions
Low Stock349336-763 - INDUCER MOTOR ASSEMBLY (CARRIER, 2-STAGE, DIRECT REPLACEMENT, P326628-763)
Carrier

349336-763 – INDUCER MOTOR ASSEMBLY (CARRIER, 2-STAGE, DIRECT REPLACEMENT, P326628-763)

SKU P326628-763·Replaces P326628-763, 349336-763
$232.31
In-store price · paid at counter
Low Stock at our Dallas counter
Tested before you leave. Free at the counter.
In-Store Only — We Don’t Ship
Every part is sold in person at our Dallas counter. No shipping, no online orders. Solo venta en tienda — no hacemos envíos.
Visit our Dallas counter to purchase
10226 Plano Rd, Suite 104 · Dallas TX 75238
Call (214) 340-9421 Get directions
Open now · Closes 7pm·Mon–Fri 10am–7pm · Sat 10am–3pm
Free part testingBench-tested at the counter
27,000+ in stockToday, on the shelf
4.9 · 546 reviewson Google
Since 199828 years on Plano Rd
Free Part Testing
27,000+ In Stock
4.9 Stars · 546+ Reviews
Since 1998
🏪 In-Store Pickup Only — We do not offer shipping or online ordering. Visit our Dallas location to purchase.
In Stock

Visit our Dallas store to purchase

Call (214) 340-9421Get Directions
In Stock — Pick Up at Our Dallas Store

10226 Plano Rd, Suite 104, Dallas TX 75238

Questions? Call or text (214) 340-9421

Mon–Fri 10 am – 7 pm  |  Sat 10 am – 3 pm

Symptoms of failure

  • Furnace will not light and you hear nothing before ignition
  • Inducer whines, rattles or grinds on start-up
  • Board flashes a pressure switch fault
  • Furnace tries to start, runs a few seconds and shuts down
  • Inducer runs but the burners never light
  • Rumbling or vibration from the flue side of the furnace

Seeing these does not always mean this part is the culprit. Bring the old one in and we will meter it at the counter, free, before you buy.

The draft inducer motor assembly pulls combustion gases out of your furnace and vents them safely outside. This is a two-speed motor for two-stage Carrier furnaces. If your furnace won’t ignite, shows a pressure switch error, or the inducer is noisy or won’t start on either stage, this is the replacement.

Specs: 115V, 3000 RPM, two-speed shaded pole motor. Complete assembly includes motor, bracket, wheel, and hardware. Packard 66763.

Replaces: 1183504, 20503, 310AAV066110ADJA, 310AAV066110AGJA, 326628-703, 326628-763, 326628-764, 326628-765, 347822-763, 347822-764, 347822-765, 349336-763, 349336-764, 58PHB110-10120, 58STA110-13122, 58STA11010122, 58STA11013122, 66763, HC21ZE127, P326628-763, PG8MAA066110ADJA

Fits: Carrier: 310AAV066110ADJA, 310AAV066110AGJA, 58PHB110-10120, 58STA110-13122, 58STA110; Bryant and Payne two-stage furnaces.

Need help? See our Furnace Not Heating Guide.

In stock at Open To Public HVAC Parts in Dallas. We test parts at the counter before you buy. Call or text (214) 340-9421.

Specs

  • TypeDraft inducer motor assembly
  • OEM CompatibilityCarrier
  • Voltage115V (nameplate may read 110V or 120V)
  • Stages2-stage

Installing it yourself

Difficulty 3/5Typical time 45-60 minutes

  1. Shut off gas and power at the furnace switch and confirm 0V.
  2. Photograph the wiring, the pressure switch hose routing and the mounting orientation.
  3. Disconnect the pressure switch hose and the motor leads.
  4. Unbolt the assembly from the heat exchanger collector box.
  5. Scrape the old gasket cleanly. A leaking gasket makes the new inducer look faulty.
  6. Fit the new assembly with a fresh gasket, in the same orientation as the old one.
  7. Reconnect the hose to the same port, restore gas and power, and watch a full ignition cycle.
  8. Combustion parts are not a place to improvise - if anything does not seat right, stop and bring it in.

Power off at the disconnect first, every time. Not sure partway through? Bring it to the counter and we will walk it with you.

Related inducer motor

View all inducer motor →
$232.31
Low Stock · Dallas counter
Call Directions
Call (214) 340-9421