☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (512 reviews) | ¿Hablas español? | Get Directions

Stocked Inventory Catalog

Catalog · Dallas, TX

HVAC Parts Catalog. 27,000+ on the shelf.

Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.

Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Open To Public HVAC Parts founder Danny Sides at the counter holding a blower wheel motor
Open today Mon–Fri 10am–7pm · Sat 10am–3pm | 10226 Plano Rd, Suite 104, Dallas | (214) 340-9421 | ★★★★★ 4.9 · 512 reviews
★★★★★
4.9 · 512 reviewson Google
27,000+ parts in stock1,500+ unique part numbers
Free bench testingCapacitors · motors · ignitors
Walk-in welcomeNo account · No minimums
Browse the counter

Shop parts by category

Ten departments, organized the way our counter is. Every category is on the shelf today.

We carry parts for every major brand — OEM & aftermarket
Rheem HVAC brand logo
Trane HVAC brand logo
Carrier HVAC brand logo
Goodman HVAC brand logo
Lennox HVAC brand logo
Ruud HVAC brand logo
York HVAC brand logo
American Standard HVAC brand logo
Amana HVAC brand logo
Plan your visit

Walk in. We'll help you match it.

Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

Address
10226 Plano Rd, Suite 104Dallas, TX 75238
Hours
Mon–Fri 10am–7pmSat 10am–3pm · Closed Sun
Call or text
(214) 340-9421We'll look up your part before you drive over
Free at the counter
Bench testingCapacitors · motors · ignitors · boards
Open To Public HVAC Parts storefront at 10226 Plano Rd Suite 104 in Dallas TX

¿Buscas partes de HVAC en Dallas?

Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.

Ver página en español →
In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.

Showing 561–570 of 1291 results

  • In StockFS10 - START COLLAR
    UNIVERSAL

    FS10 – START COLLAR

    SKU · 52510
    $3.59

    10″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.

  • Low StockCNT07737 - CONTROL BOARD (OEM, TRANE, CONSTANT TORQUE)
    TRANE

    CNT07737 – CONTROL BOARD (OEM, TRANE, CONSTANT TORQUE)

    SKU · CNT7737
    $220.14

    Trane CNT07737 OEM control board for furnaces with constant torque motors. Replaces CNT04711. Fits TUD1C series and similar Trane/American Standard models.

  • Low StockS1-37319801821 - INDUCER MOTOR (AFTERMARKET, DIRECT, 65475)
    UNIVERSAL

    S1-37319801821 – INDUCER MOTOR (AFTERMARKET, DIRECT, 65475)

    SKU · S1-37319801821
    $138.15

    Aftermarket inducer motor for Coleman/York furnaces. 1/150 HP, 115V, 3315 RPM. Direct replacement for S1-37319801821. Ball bearing motor for longer life.

  • In StockB1370133 - FURNACE PRESSURE SWITCH (-0.35PR)
    UNIVERSAL

    B1370133 – FURNACE PRESSURE SWITCH (-0.35PR)

    SKU · B1370133
    $49.06

    Goodman B1370133 furnace pressure switch, -0.35″ WC. OEM replacement for Goodman gas furnaces. Monitors inducer draft for safe ignition.

  • In StockFDS181 - MASTIC (1 GALLON, FIBER-REINFORCED)
    UNIVERSAL

    FDS181 – MASTIC (1 GALLON, FIBER-REINFORCED)

    SKU · FDS181GRAY
    $18.59

    Foster FDS181 fiber-reinforced mastic, 1 gallon. Water-based duct sealant. UL 181 A-M and B-M listed. For sealing metal, fiberglass, and flex duct connections.

  • In Stock140221 - ZONE CONTROL (2 ZONE)
    UNIVERSAL

    140221 – ZONE CONTROL (2 ZONE, 2 HEAT/1 COOL)

    SKU · REPLACEMENT FOR HZ211
    $136.15

    Braeburn 140221 zone control panel — 2 zones, 2 heat/1 cool. Controls two thermostats and zone dampers for independent comfort in two areas. Replaces HZ211.

  • In StockBOOT845 - INSULATED REGISTER BOOT (8X4-5)
    UNIVERSAL

    BOOT845 – INSULATED REGISTER BOOT (8X4-5)

    SKU · 641R485
    $16.60

    Insulated galvanized register boot, 8×4 opening with 5″ round duct connection. Internally lined to reduce condensation and noise. Compact size for smaller registers.

  • In StockFG1010 - FILTER GRILLE (10 x 10)
    UNIVERSAL

    FG1010 – FILTER GRILLE (10″ x 10″)

    SKU · FG1010
    $27.95

    10″ x 10″ return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

  • Low Stock42-101225-81 - FURNACE PRESSURE SWITCH (-0.35PF)
    UNIVERSAL

    42-101225-81 – FURNACE PRESSURE SWITCH (-0.35PF)

    SKU · 42-101225-81
    $89.45

    Rheem 42-101225-81 furnace pressure switch, -0.35″ WC. OEM replacement for Rheem and Ruud gas furnaces. Monitors inducer draft for safe ignition.

  • In Stock70/10/440 - CAPACITOR (MADE IN USA)
    UNIVERSAL

    70/10/440 – DUAL CAPACITOR (ROUND, MADE IN USA)

    SKU · C47010R
    $50.84

    70+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.

Showing 570 of 1291 parts
Call (214) 340-9421