EAFHG1425-6 – FILTER BASE (14″W x 25″D – 1″, 2″, or 4″ FILTER, GAS)
EAFHG1425-6 filter base for gas furnaces, 14×25 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 41–50 of 1617 results

EAFHG1425-6 filter base for gas furnaces, 14×25 filter size. Accepts 1″, 2″, or 4″ thick filters. Insulated housing with magnetic door latch. Up to 5 tons.

7″ x 5″ x 5″ galvanized duct wye. Reduces a 7″ trunk into two 5″ branch ducts. Standard fitting for residential HVAC ductwork.

16″W x 6″T 3-way supply register with stamped steel face. White powder coat. Built-in multi-shutter damper for airflow control. Wall or ceiling mount.

ICM275C control board for Carrier furnaces. Replaces HH84AA001, HH84AA003, HH84AA005, HH84AA009, HH84AA014, HH84AA015, HH84AA021. Aftermarket direct fit.

Supco FSC10 flame sensor cleaner. Compact, durable tool cleans flame sensor rods in seconds. Fixes the most common cause of furnace short-cycling.

Goodman 0130F00505 furnace pressure switch, -0.70″ WC. Fits Goodman GMS80905CN series and others. Also replaces B1370158, 10727923, and 632432R.

Universal replacement high-limit control from SUPCO’s CAMSTAT L59 series, with a 3 in bimetal element extension.

10 MFD 440V oval run capacitor. Powers a single motor — usually the condenser fan. Budget-friendly TrueLine replacement for any 10 MFD oval cap.

10″ x 10″ 4-way supply register with stamped steel face. White powder coat. Built-in multi-shutter damper for airflow control. Wall or ceiling mount.

R-4 ductboard sheet, 1″ thick, 4’x10′. Fiberglass board with foil facing used to build or repair duct systems. Owens Corning 703-type. Cut and fold to make your own ductwork.