EDG-2K-20C – CONDENSER WALL MOUNT BRACKET W/ CROSSBAR (1 – 2T)
1-2 ton condenser wall mount bracket with crossbar by Everwell. Galvanized steel, holds mini-split or small condenser off the ground. Includes hardware.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 191–200 of 1617 results

1-2 ton condenser wall mount bracket with crossbar by Everwell. Galvanized steel, holds mini-split or small condenser off the ground. Includes hardware.

Goodman thermostatic expansion valve, 3.5-5 ton, for R-22 systems, with Chatleff connections.

6′ electrical whip with #10 gauge wire and 1/2″ liquid-tight non-metallic conduit. Connects your AC disconnect to the condenser. Pre-wired and ready to install.

Goodman/Amana HKR-series field-installed electric heat kit. Goodman publishes 9.50 kW at 240V (32,400 BTU/h) for the -10 size, and the trailing C denotes a single-phase kit with a factory circuit breaker.

70+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.

Supco SSN2000 universal 120V silicon nitride ignitor. Replaces hundreds of OEM ignitor models. Includes mounting hardware for a wide range of furnace brands.

10 MFD 440V oval run capacitor. Powers a single motor — usually the condenser fan. Budget-friendly TrueLine replacement for any 10 MFD oval cap.

Assorted insulated terminal kit, 330 pieces, for stocking a service truck. Standard insulation colour codes apply: red 22-18 AWG, blue 16-14 AWG, yellow 12-10 AWG.

Trane FAN06720 condenser fan blade — 23″, 3-blade, 26° pitch, CCW rotation, hub on intake side. OEM replacement. Replaces FAN03127 and FAN04003.

Goodman 0130F00010 flame sensor, factory OEM part. Fits Goodman and Amana furnaces including GMS80805CN and GMVC80805CN series. Also replaces B1172606.