NTCK194 – CERAMIC FUSE LINK
Ceramic one-shot thermal fuse link – backup overheat protection in electric furnaces and air handlers.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 1321–1330 of 1617 results

Ceramic one-shot thermal fuse link – backup overheat protection in electric furnaces and air handlers.

Gates A45 Hi-Power II classical V-belt, an A-section belt for blower and fan drives. The listing does not publish the belt’s length or top width, so measure the belt you are replacing before ordering.

First Company 9-115-34-1 thermal fuse link assembly. 25 Amp, opens at 300°F. Ceramic body with stake-on terminals. Safety device for First Company HX coil units.

Carrier OEM inducer motor gasket kit. Seals the inducer motor housing to prevent exhaust gas leaks. Use when replacing the inducer motor or if you smell exhaust fumes near the furnace.

Aftermarket inducer motor assembly for Rheem/Ruud furnaces. 115V, 3000 RPM. Replaces 70-101087-81 and 70-24175-01. Complete assembly with motor, housing, and wheel.

Fieldpiece SDMN5 dual-port manometer. Measures -60″ to 60″ WC for gas pressure and duct static readings. Includes adapters, magnetic hanger, and auto power-off.

Lennox 80M29 aftermarket ignitor replacement. 120V hot surface ignitor for Lennox, Armstrong, and Ducane furnaces. Supco SSN2901 — direct drop-in.

Carrier HK50AA051 terminal board (also listed as 1183618). Provides terminal connections for wiring inside commercial and residential Carrier/Bryant/Payne equipment.

Fieldpiece 3-port analog refrigerant manifold with piston valves and Class 1A gauges rated to +/-1% of full scale.

Three-blade hubless axial condenser fan blade, 22 in. diameter, 33 degree pitch, clockwise rotation.