PE44 – PIN EXTRACTOR TOOL
ESP PE44 pin extractor tool. Removes and reinserts AMP and Molex pins from HVAC wire harness connectors without cutting or splicing wires.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 1191–1200 of 1617 results

ESP PE44 pin extractor tool. Removes and reinserts AMP and Molex pins from HVAC wire harness connectors without cutting or splicing wires.

30″W x 20″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

Carrier HK61EA034 rectifier control board. Converts AC to DC for electronic components in Carrier, Bryant, and Payne air handlers. Replaces HK61EA004.

Rheem 10 kW electric heat kit for SEER2 air handlers. Part #RXBH-1724A10J-BR. Includes circuit breaker, smart plug, and legacy board adapter.

Galvanized metal line set cover, 4″ x 4″ x 4″, 10 feet long. Covers and protects refrigerant copper lines running along the outside of the house. Includes flange mounts and cap.

Lennox / Allied Air ECB45-series electric heat section, 10 kW at 208/240V single phase, 60 Hz, with factory-installed circuit breaker protection (one 60 A breaker). Lennox lists it for CBK45 and CBA25 series air handlers.

Rheem Endeavor Line Select Series WA14AY outdoor condensing unit, 3.5 ton nominal (42,000 BTU/h), 208/230V single phase.

Galvanized secondary drain pan, 14″ x 44″, with drain on the 14″ side. Sits under your indoor coil or air handler to catch overflow if the primary drain clogs.

Rheem Endeavor Line Classic Series RA14AY outdoor condensing unit, 4 ton nominal (48,000 BTU/h), 208/230V single phase.

80V silicon nitride ignitor for Amana furnaces. Replaces 11111701S. Part 768A-842. Direct fit — check that your furnace uses 80V, not 120V.