MINISPLIT ACCESSORIES

This is where you can browse products in this store.

Product images are representative. Always verify compatibility with your model number before visiting us in store.

Need help finding the right part?

We test parts at the counter and match the right replacement. Walk in or call ahead.

☎ Call (214) 340-9421 📍 Get Directions Mon–Fri 10–7 | Sat 10–3

In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.

All parts 1,617 Equipment & Systems 119 Filters & Air Quality 106 Air Distribution 276 Furnace & Heating 51 Refrigeration 90 Thermostats & Zone Controls 23 Switches & Sensors 168 Electrical Components 277 Motors & Blower Parts 161 Tools & Supplies 349

Showing all 18 results

In Stock
UNIVERSAL
U-58 – FLARE UNION
SKU · U58
$5.44
5/8″ brass flare union by Everwell. Connects two flared copper lines together. Common for larger mini-split suction lines and AC refrigerant tubing.
In Stock
EVERWELL
F017C – CONDENSER WALL MOUNT BRACKET (1 & 1.5T)
SKU · F017C
$36.12
1-1.5 ton condenser wall mount bracket by Everwell. Heavy-duty steel with rust-resistant coating and vibration absorbers. For mini-split outdoor units.
In Stock
UNIVERSAL
U-12 – FLARE UNION
SKU · U-12
$5.01
1/2″ brass flare union by Everwell. Connects two flared copper lines together. Used in mini-split, refrigeration, and HVAC line set connections.
In Stock
SOUTHWIRE
PWT14450 – MINISPLIT CONTROL WIRE (14/4, 50′)
SKU · PWT14450
$80.36
50′ mini-split control wire, 14-gauge 4-conductor. Connects the indoor unit to the outdoor condenser for power and communication. Stranded copper.
In Stock
EVERWELL
LSCMS2 – MINI SPLIT LINE SET COVER (2 & 3T, CDS3, 4″x2.75″x13′)
SKU · CDS-3
$81.48
Everwell CDS-3 mini-split line set cover for 2-3 ton systems. 4″ x 2.75″ x 13′ length. Protects refrigerant lines from weather and UV damage.
Low Stock
EVERWELL
LS2538-14X58 – MINISPLIT LINE SET (FLARED, 25FT)
SKU · ls14581225dmsf
$182.64
Everwell 25 ft insulated twin tube mini split line set with 1/4" OD liquid tubing and 5/8" OD suction tubing.
In Stock
EVERWELL
LSCMS – MINI SPLIT LINE SET COVER (1 & 1.5T, CDS-2)
SKU · CDS-2
$63.53
Everwell CDS-2 mini-split line set cover for 1-1.5 ton systems. Protects refrigerant lines and wiring from weather and UV. Clean, professional look.
Low Stock
EVERWELL
LS1538-14X38 – INSULATED MINISPLIT LINE SET (FLARED, 15′)
SKU · ls14381215dmsf
$96.80
15′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Ready to install — no flaring tool needed.
In Stock
SHURTAPE
LS300 – LINE SET TAPE (1.88″ x 180′)
SKU · 102666
$15.82
Shurtape LS 300 UV-resistant line set tape. Built from OPP polypropylene film with acrylic adhesive so it will not delaminate, it conforms to the curves of a line set and holds up outdoors from -35 F to 210 F. Roll size per our stock record is 1.88 in. x 180 ft.
Low Stock
EVERWELL
LS2538-14X12 -MINISPLIT LINE SET (25FT, FLARED)
SKU · ls14121225dmsf
$144.10
Mini-split line set — 25 ft, 1/4″ liquid x 1/2″ suction, pre-flared ends. Insulated suction line. Ready to install on most 9,000-12,000 BTU ductless systems.
Out of Stock
GOODMAN
LS14381230DMSF – MINISPLIT LINE SET (FLARED, 30FT)
SKU · LS14381230DMSF
$133.25
30′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Longer run for installs where the condenser is far from the wall unit.
In Stock
UNIVERSAL
U-38 – FLARE UNION
SKU · U38
$4.88
3/8″ brass flare union by Everwell. Connects two flared copper lines together. Common for mini-split suction lines and refrigerant tubing.
Low Stock
ICOOL
B145812025F – MINISPLIT LINE SET
SKU · B145812025F
$177.15
Insulated mini split line set, 25 ft, with a 1/4 in. liquid line and a 5/8 in. suction line, pre-flared with flare nuts and jacketed in 1/2 in. closed-cell insulation.
In Stock
UNIVERSAL
U-14 – FLARE UNION
SKU · U14
$4.38
1/4″ brass flare union by Everwell. Connects two flared copper lines together. Common for mini-split liquid lines and small refrigeration tubing.
Low Stock
EVERWELL
EDG-2K-20C – CONDENSER WALL MOUNT BRACKET W/ CROSSBAR (1 – 2T)
SKU · EDG-2K-20C
$59.59
1-2 ton condenser wall mount bracket with crossbar by Everwell. Galvanized steel, holds mini-split or small condenser off the ground. Includes hardware.
Out of Stock
EVERWELL
CP-MWP – MINISPLIT WEDGE CONDENSATE PUMP
SKU · CP-MWP
$91.01
Everwell mini-split condensate pump with wedge design for tight spaces. Quiet operation, 65-foot max lift. Made specifically for ductless mini-split installations.
In Stock
EVERWELL
F019C – CONDENSER WALL MOUNT BRACKET (2 & 3T)
SKU · F019C
$36.60
2-3 ton condenser wall mount bracket by Everwell. Heavy-duty galvanized steel with epoxy coating and vibration absorbers. Pre-assembled with hardware.
Low Stock
EVERWELL
LS2538-14X38 – MINISPLIT LINE SET (FLARED, 25FT)
SKU · ls14381225dmsf
$131.55
Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.