HKR-15C – HEAT KIT (15 KW, 208/230V, HKR/HKA/HKTPD)

Goodman/Amana HKR-series field-installed electric heat kit, 15 size. Goodman’s nomenclature table lists the 15 size at 14.25 to 15.00 kW at 240V, and the trailing C denotes a single-phase kit with a factory circuit breaker. It is a two-circuit kit. Note that Goodman lists HKP-15C as replacing HKR-15C to meet UL1995. Confirm the kit against the air handler electrical data table.

Specifications published by the manufacturer. Source: manufacturer documentation.

Specs

• BrandTUTCO
• Heating Capacity14.25 to 15.00 kW @ 240 V
• Published Output (HKA/HKP-15C equivalent)14.25 kW / 48,600 BTU/h @ 240 V
• Voltage / Phase208/240 V / 1 Ph
• Internal ProtectionCircuit breaker (C suffix)
• CircuitsTwo
• FitsGoodman/Amana AVPTC, ASPT, ARUF, MBVC, MBR air handlers and GPC/GPH packaged units
• SupersessionHKP-15C replaces HKR-15C (UL1995)
• FeaturesSequencers, plug-in harness, nickel chromium elements, ETL listed
• Sold AsTUTCO-built kit, OEM equivalent

Cross-reference numbers

This part replaces the following OEM and aftermarket numbers:

• HKA-15C
• HKR-15
• HKR15
• HKA15C
• HKTAD151
• ARUF364216BA
• 81-0303-05
• 81-0303-04
• 81-0303-03
• HKP-15C
• HKTPD151

Not sure if your number matches? Call (214) 340-9421 or bring the old part in — bench-testing is free.

Fits these models

• Goodman and Amana air handlers
• Goodman and Amana modular blowers
• Goodman and Amana packaged units
• Goodman lists the matching HKP-series kit as the replacement for the HKR series
• Approval is model-specific - check the heat kit table for your air handler and the unit nameplate before ordering

How do I size a heat kit for my air handler?

Match the kW rating to your air handler's tonnage: - 10 kW -- fits 1.5, 2, or 2.5 ton air handlers - 15 kW -- fits 3, 3.5, or 4 ton air handlers - 20 kW -- fits 5 ton air handlers

Can I add electric heat to my heat pump system?

Yes -- heat pumps almost always use electric strips as backup ("auxiliary heat" or "emergency heat"). The thermostat energizes the strips when outdoor temps drop below balance point (typically 35-40 degrees F in DFW). Match the heat kit to your air handler model.

What does the suffix on the part number mean?

The suffix typically indicates breaker configuration: - BRK = factory breaker included - BR = breakerless (you provide the disconnect) - Other suffixes = circuit count, voltage taps, or thermostat compatibility

How long does an electric heat kit last?

20+ years typical for the kit itself; individual heating elements (sheath heaters) may fail in 8-15 years from cycling. Most kits have replaceable elements -- you don't have to replace the whole kit for one bad strip.

Why is my heat kit tripping the high-limit?

Restricted airflow is the #1 cause: clogged filter, dirty blower wheel, undersized return, closed-off supplies. The strips overheat when air doesn't move across them fast enough. Diagnose airflow before condemning the heat kit or limit switch.