☀️ AC Season Is Here — Capacitors, Contactors & Motors In Stock. Browse Parts or Call (214) 340-9421
📞 (214) 340-9421 | Mon–Fri 10–7 • Sat 10–3 | ⭐ 4.9 (546 reviews) | ¿Hablas español? | Get Directions

Stocked Inventory Catalog

Catalog · Dallas, TX

HVAC Parts Catalog. 27,000+ on the shelf.

Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.

Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Open To Public HVAC Parts founder Danny Sides at the counter holding a blower wheel motor
Open today Mon–Fri 10am–7pm · Sat 10am–3pm | 10226 Plano Rd, Suite 104, Dallas | (214) 340-9421 | ★★★★★ 4.9 · 512 reviews
★★★★★
4.9 · 512 reviewson Google
27,000+ parts in stock1,500+ unique part numbers
Free bench testingCapacitors · motors · ignitors
Walk-in welcomeNo account · No minimums
Browse the counter

Shop parts by category

Ten departments, organized the way our counter is. Every category is on the shelf today.

We carry parts for every major brand — OEM & aftermarket
Rheem HVAC brand logo
Trane HVAC brand logo
Carrier HVAC brand logo
Goodman HVAC brand logo
Lennox HVAC brand logo
Ruud HVAC brand logo
York HVAC brand logo
American Standard HVAC brand logo
Amana HVAC brand logo
Plan your visit

Walk in. We'll help you match it.

Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

Address
10226 Plano Rd, Suite 104Dallas, TX 75238
Hours
Mon–Fri 10am–7pmSat 10am–3pm · Closed Sun
Call or text
(214) 340-9421We'll look up your part before you drive over
Free at the counter
Bench testingCapacitors · motors · ignitors · boards
Open To Public HVAC Parts storefront at 10226 Plano Rd Suite 104 in Dallas TX

¿Buscas partes de HVAC en Dallas?

Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.

Ver página en español →
In-Store Pickup Only — Browse our catalog below, then visit us in Dallas or call (214) 340-9421 to purchase.

Showing 901–910 of 1617 results

  • In StockSWRD10 - ROUND DIFFUSER (10 HOLE)
    VENTI

    SWRD10 – ROUND DIFFUSER (10″ HOLE)

    SKU · SWRD10
    $16.65

    10″ round ceiling diffuser with 360-degree airflow. Steel with white powder coat. Mounts in 10″ round duct opening. Great for bedrooms, hallways, and offices.

  • In StockBPV21 - PIERCING VALVE (1/2, 5/8)
    SUPCO

    BPV21 – PIERCING VALVE (1/2″, 5/8″)

    SKU · QTM-2
    $8.12

    Supco BPV21 Bullet piercing valve for 1/2″ and 5/8″ OD tubing. Clamps onto sealed lines to add a service access port — no brazing needed. Patented gasket seal.

  • Low Stock6852-20 - GAUGE SHEER
    MILWAUKEE

    6852-20 – GAUGE SHEER

    SKU · 6852-20
    $129.99

    Milwaukee 18 gauge shear for cutting sheet metal and ductwork, driven by a 6.8 amp motor with variable speed to 2,500 strokes per minute.

  • In StockTURBO200X - CAPACITOR
    AMRAD

    FLEXCAP200X – CAPACITOR (5-97.5MFD)

    SKU · TURBO200X
    $109.43

    Turbo 200X universal capacitor — adjustable from 5 to 97.5 MFD at 370/440V. Replaces virtually any single or dual run capacitor. Made in the USA with CPT protection.

  • Low StockRH2TY4821STANNJ - AIR HANDLER (4 TON, R454B, 21
    RHEEM

    RH2TY4821STANNJ – AIR HANDLER (4 TON, R454B, 21″, SEER2)

    SKU · RH2TY4821STANNJ
    $1,619.60

    Rheem Endeavor Line RH2TY multipurpose air handler, 48,000 BTU/H nominal on R-454B with a factory TXV and non-communicating controls.

  • Low StockQT1105 - CAN TAP
    QWIK PRODUCTS

    QT1105 – FLUSH CAN ACCESS VALVE

    SKU · QT1105
    $36.10

    QwikProducts QT1105 can tap valve for HVAC system flush cans. Built-in pressure relief valve for safe refrigerant-line flushing. Reusable tool — pairs with flush solvent cans.

  • In Stock6THW8X2R25 - SCREWS (QTY - 250, TAPER POINT, #8, 2 LONG, 1/4 WHITE HEX)
    VENTI

    6THW8X2R25 – SCREWS (QTY – 250, TAPER POINT, #8, 2″ LONG, 1/4″ WHITE HEX)

    SKU · 6THW8X2R25
    $25.92

    #8 x 2″ white hex head taper point screws, 250-pack. Self-piercing with 1/4″ white painted hex head. Used for registers and grilles.

  • In StockRG1608 - RETURN GRILLE (16W x 8T)
    PROGRILLE

    RG1608 – RETURN GRILLE (16″W x 8″T)

    SKU · rg1608
    $14.30

    16″W x 8″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

  • Out of StockR32210 - FAN BLADE (3, 22, 27°, CCW, HUBLESS)
    REVCOR

    R32210 – FAN BLADE (3, 22″, 27°, CCW, HUBLESS)

    SKU · R32210
    $96.02

    22″ aluminum 3-blade condenser fan blade. 27° pitch, CCW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

  • Low StockRXBH-1724A15J-BR - HEAT KIT (RHEEM, 15 KW, SEER2)
    RHEEM

    RXBH-1724A15J-BR – HEAT KIT (RHEEM, 15 KW, SEER2)

    SKU · RXBH-1724A15J-B
    $303.44

    Rheem 15 kW electric heat kit for SEER2 air handlers. Part #RXBH-1724A15J-BR. Includes circuit breaker, smart plug, and legacy board adapter.

Showing 910 of 1617 parts
Call (214) 340-9421