COILBRUSH – COIL BRUSH
3″ nylon coil brush for cleaning condenser and evaporator coils. Loosens dirt, dust, and debris between fins without bending them. Basic HVAC maintenance tool.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 811–820 of 1291 results

3″ nylon coil brush for cleaning condenser and evaporator coils. Loosens dirt, dust, and debris between fins without bending them. Basic HVAC maintenance tool.

MC-size acetylene refill, 10 cu.ft. of gas contents. Bring in your empty MC acetylene bottle and exchange it for a full one. For small HVAC brazing jobs.

12″ x 9″ x 9″ galvanized duct wye. Reduces a 12″ trunk into two 9″ branch ducts. Standard fitting for residential HVAC ductwork.

Hydro-Balance H-401 green evaporator coil cleaner, 1-gallon concentrate. Non-foaming formula for indoor coils. Mix with water — one gallon makes multiple batches.

36″ x 36″ x 3″ plastic equipment pad for outdoor AC condensers and heat pumps. Blow-molded, UV-resistant, and lightweight. Keeps your unit level and off the ground.

Insulated return air box, 20×25 opening with ductboard top. Connects return grilles to round ductwork — cut the top on-site to match your duct size. Galvanized steel.

Supco SF3813 valve core tool with 3 replacement cores. 3-inch all-brass body with textured grip. Removes and installs Schrader valve cores on AC service ports.

PF20252 pleated air filter. MERV 8, 20″ x 25″ x 2″. Fits standard residential HVAC systems. Replace every 60-90 days for best airflow and filtration.

10″ x 10″ return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

Supco low-pressure switch — opens at 50 PSI, closes at 90 PSI. 1/4″ SAE flare fitting, auto-reset. Protects compressor from low refrigerant pressure.