Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit
Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.
¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 671–680 of 1617 results
Yellow Jacket 19041 SealRight 1/4″ complete overhaul kit. Rebuilds your low-loss quick couplers with new seals, springs, and o-rings. Cheaper than replacing the whole coupler.
25″W x 20″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.
Supco SHL517 high limit switch, 3-inch insertion, opens at 220°F, closes at 180°F. Auto reset. Crosses to Carrier HH12ZB220 and Lennox 29M75.
14″W x 6″T 3-way supply register with stamped steel face. White powder coat. Built-in multi-shutter damper for airflow control. Wall or ceiling mount.
Genuine PROTECH single-pole contactor with a 24 VAC coil, listed by Rheem as "Contactor – 40A 1-Pole (24V coil)" and manufactured by Zettler.
1/2″ x 36″ yellow flex gas connector with MIP fittings. Epoxy-coated stainless steel. Connects furnaces, water heaters, dryers, and ranges to your gas line.
LG compressor wiring harness. Molded plug connects to the compressor terminals. Rheem OEM part 45-107231-02. Also cross-references 104162-03 and 13U63.
Foster FDS181 fiber-reinforced mastic, 1 gallon. Water-based duct sealant. UL 181 A-M and B-M listed. For sealing metal, fiberglass, and flex duct connections.
Aftermarket inducer assembly for Carrier furnaces. 208-230V, 3450 RPM. Replaces 50DK406815. Complete assembly with motor, housing, and wheel. Packard 66649.
3/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/8″ copper pipe in a straight line. Wrot copper for brazing.