47-104990-04 – HIGH TEMPERATURE LIMIT SWITCH (3″, ODD BASE, L150°)
Rheem 47-104990-04 high limit switch, 3-inch insertion, odd base, opens at 150°F. Auto reset. OEM replacement for Rheem and Ruud furnaces.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 451–460 of 1291 results

Rheem 47-104990-04 high limit switch, 3-inch insertion, odd base, opens at 150°F. Auto reset. OEM replacement for Rheem and Ruud furnaces.

18″ aluminum 4-blade condenser fan blade. 27° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

240V condensate pump with built-in overflow safety switch. Pumps condensate away from your AC or furnace when gravity drain isn’t possible. For 240V systems.

1 HP Genteq Evergreen variable-speed ECM blower motor. 120/240V dual voltage, 4-pin control. Direct drop-in for Genteq model 3.0 ECMs. Largest HP in the Evergreen VS line.

270-324 MFD 330V start capacitor with bleed resistor. Gives the compressor an extra boost on startup. Resistor is built in — no separate wiring needed.

Carrier HH18HA507 auto reset limit switch, opens at 185°F, closes at 145°F. Large base, micro size. OEM replacement for Carrier, Bryant, and Payne furnaces.

1-1/8″ to 7/8″ ACR copper reducer bushing (FTG x C). Steps down from 1-1/8″ fitting to 7/8″ copper pipe. Wrot copper for brazing.

Aftermarket 213BOX replacement for Aprilaire 213. MERV 13, 20x25x4. Same filtration as the OEM filter at a lower price. Fits Aprilaire 2210, 3210, and 4200.

1/2″ 90-degree liquid-tight elbow fitting. Makes a clean turn where conduit enters a junction box or disconnect. Non-metallic, weatherproof.

36″ x 36″ x 3″ plastic equipment pad for outdoor AC condensers and heat pumps. Blow-molded, UV-resistant, and lightweight. Keeps your unit level and off the ground.