STC4468 – TEMPERATURE FUSE LINK (L468°, 15A)
Temperature fuse link, opens at 468°F (242°C). 15 Amp rated. One-time-use thermal safety device — if it’s blown, the system overheated and needs the fuse link replaced.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 311–320 of 1291 results

Temperature fuse link, opens at 468°F (242°C). 15 Amp rated. One-time-use thermal safety device — if it’s blown, the system overheated and needs the fuse link replaced.

C&D CD2028 brass adapter. 1/4″ male flare to 1/2″ female Acme swivel with depressor. Adapts R-134a automotive fittings to standard 1/4″ HVAC connections.

Aftermarket inducer motor assembly for ICP/Heil/Tempstar furnaces. 115V, 1.6A. Replaces 1013833. Complete assembly with motor, housing, and wheel.

1/3-1/5 HP 2-speed condenser fan motor, 825 RPM, 208-230V, 7.5 MFD cap. Reversible rotation with thermal overload protection.

#8 x 1/2″ hex head sheet metal screws, 1/4″ hex drive, 1000-pack. Zinc-plated self-piercing screws for HVAC sheet metal work.

Supco SHL518 high limit switch, 3-inch insertion, opens at 250°F, closes at 210°F. Auto reset. Crosses to Carrier HH12ZB250. Universal furnace replacement.

12″W x 8″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

Rheem RCFZ4821STANMC evaporator coil, 4-ton, R-410A, 21″ cabinet width. Cased coil for upflow/downflow applications. SEER2 compliant.

30″W x 8″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

1/2″ straight liquid-tight fitting. Connects liquid-tight conduit to a junction box or disconnect. Non-metallic, weatherproof.