LS2538-14X38 – MINISPLIT LINE SET (FLARED, 25FT)
Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 301–310 of 1291 results

Mini-split line set — 25 ft, 1/4″ liquid x 3/8″ suction, pre-flared ends. Insulated suction line. Fits most 9,000 BTU ductless systems.

R-6 ductboard sheet, 1.5″ thick, 4’x10′. Fiberglass board with foil facing for building or repairing duct systems. Higher insulation than R-4 for attics and unconditioned spaces.

QuickSling QSTD1000 air handler stand. Adjustable height, holds up to 500 lbs, includes anti-vibration pads and secondary drain pan shelf. For attic and closet installs.

Carrier flame sensor replacement (LH680534). Aftermarket direct fit with 73-degree bend and Kanthal rod. Replaces LH33WZ515, LH33WZ517, LH33WZ521, and more.

70+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly Supco replacement for residential AC.

Carrier HH18HA498 auto-reset limit switch. Micro size with large base, opens at 210°F. Shuts off the furnace burner if the heat exchanger gets too hot.

8″ round ceiling diffuser with 360-degree airflow. Steel with white powder coat. Mounts in 8″ round duct opening. Great for bedrooms, hallways, and offices.

Fieldpiece DR82 infrared refrigerant leak detector. Detects leaks as small as 0.03 oz/yr. 10-year sensor life and 10-hour rechargeable battery. No false alarms from common gases.

14″W x 6″T 3-way supply register with stamped steel face. White powder coat. Built-in multi-shutter damper for airflow control. Wall or ceiling mount.

3/4 to 1/5 HP furnace blower motor, 115V, 1075 RPM, multi-speed reversible. Requires 15 MFD capacitor. Fits Trane, Carrier, and other 115V furnaces.