FG1625 – FILTER GRILLE (16″W x 25″T)
16″W x 25″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 1521–1530 of 1617 results

16″W x 25″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.

Lennox / Allied Air ECB45-series electric heat section, 15 kW at 208/240V single phase, 60 Hz, with factory-installed circuit breaker protection (one 60 A and one 25 A breaker). Lennox lists it for CBK45 and CBA25 series air handlers.

20″ aluminum 3-blade condenser fan blade. 28° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

Insulated female quick-disconnect terminals in yellow, the standard colour code for 12-10 AWG wire.

TurboTorch PL-12A self-lighting torch tip assembly. Brazes 7/8″ to 1-5/8″ copper with Extreme Swirl Technology for faster heat-up. No striker needed — built-in ignition.

Nu-Calgon EasySeal 4050-11 refrigerant leak sealant with UV dye. Treats 2 to 7.5 ton systems. Works with all refrigerant types. Direct-inject installation.

Uniweld Ez-Turn anti-blowback mini split adapter. Converts a 1/4 in. male flare service port to the 5/16 in. (1/2-20) female fitting used on R-410A mini split service valves, and the gas-retaining design holds charge while you connect.

Ceramic temperature fuse link (straight), opens at 257°F (125°C). 15 Amp. Ceramic body for higher heat environments. Straight terminal orientation.

30″W x 8″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

Rheem 47-22861-03 manual reset limit switch, opens at 250°F. Wide mount, micro size. OEM flame rollout switch for Rheem and Ruud furnaces.