B1789882 – FLOWRATER PISTON (.082) (4T, R22)
Goodman .082″ fixed orifice piston for 4-ton systems (R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 101–110 of 1617 results

Goodman .082″ fixed orifice piston for 4-ton systems (R-22). Controls refrigerant flow in Goodman and Amana condensers. OEM part.

Victor 2-W-J torch tip for J Series light-duty torches. Mid-range tip for general brazing and soldering on copper. Controlled heat output.

Goodman B1086775SP condenser fan blade — 22″, 3-blade, 25° pitch, CCW rotation, hub on intake side. OEM replacement for Goodman and Amana condensers.

22V DC SPST relay for electric heaters in ICP/Heil/Tempstar units. Rated 30A at 28V DC and 40A at 277V AC. Direct replacement for ICP furnaces.

TurboTorch AR-B acetylene regulator, factory part number 0386-0725. It mounts to a CGA-520 "B" acetylene cylinder and is the regulator TurboTorch specifies for its air-acetylene torch kits and swirl handles.

Packard EC Max electronically commutated direct-drive blower motor, 3/4 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.

Carrier/Bryant/Payne rectifier board. Converts AC to DC for relay control in electric heat systems. OEM part HK61EA033, replaces older HK61EA003.

6′ electrical whip with #10 gauge wire and 1/2″ liquid-tight non-metallic conduit. Connects your AC disconnect to the condenser. Pre-wired and ready to install.

Trane CNT07737 OEM control board for furnaces with constant torque motors. Replaces CNT04711. Fits TUD1C series and similar Trane/American Standard models.

C&D CD1454/2 brass fitting, 2-pack. 1/4″ female flare to 1/4″ male flare with installed valve core. Adds a Schrader core to a port that doesn’t have one.