Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit
Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.
¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 701–710 of 1617 results
![CD9601/2 - TEE FITTING ([1] 1/4F to [2] 1/4M) (PACK OF 2)](https://otp-hvac.com/wp-content/uploads/2024/11/CD9601_SERVICE_VALVE_TEE_FITTING-300x300.png)
C&D CD9601/2 brass tee fitting, 2-pack. 1/4″ female flare with depressor to two 1/4″ male flare ports (one with valve core). Adds a branch access point to refrigerant lines.
POE oil (polyol ester), 1 quart. ISO 32 viscosity, synthetic. Required when adding oil to systems using R-410A, R-407C, and other HFC refrigerants.
3/4 in. refrigeration copper 45 degree elbow, long radius, cup x cup. Used for 45 degree offsets on larger suction lines where a gentle turn is preferred over a hard 90. Sized by tube OD, the standard convention for ACR fittings.
Rheem Endeavor Line RCFY cased indoor coil rated by Rheem at 36,000 BTU/H nominal on R-454B with a factory-installed TXV.
Supco ATP1 Attic Pro utility lift. Safely lifts up to 250 lbs into attics or elevated spaces. 20 ft cable with adjustable length and locking hook. One-person operation.
Fieldpiece SR47 wireless refrigerant scale. 252 lb capacity with remote control. Connects to Job Link app for wireless monitoring during charging and recovery.
Manual reset micro limit switch, opens at 240°F. Push-button reset after trip. Universal replacement for Supco SRL240 and Packard PRL240. Fits most furnaces and heaters.
16″W x 20″T return air filter grille. Holds a standard 1″ filter. Removable hinged face for easy filter changes. White steel, mounts on wall or ceiling.
Inline fuse holder for low-voltage HVAC control circuits. It splices into the 24 V control wiring and holds a replaceable cartridge fuse, so a short in the thermostat or control circuit blows the fuse instead of damaging the transformer or control board.
Malco FG1 fiberglass duct board hole cutter. Cuts 4″ to 20″ diameter holes in 1″ thick duct board. Includes utility knife blade and compass. For duct fabrication.