RG3006 – RETURN GRILLE (30″W x 6″T)
30″W x 6″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 351–360 of 1617 results

30″W x 6″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

Temperature fuse link, opens at 257°F (125°C). 15 Amp rated. One-time-use thermal safety device — if it’s blown, the system overheated and needs the fuse link replaced.

Double-sided duct knife with serrated and straight edges. Ergonomic handle and puncture-resistant sheath included. Cuts duct board, insulation, and flex duct.

Hydro-Balance H-SG25 Sludge Gun flushing tool kit. Includes canister, hose, and handle — flush solvent sold separately (H-SG16). Reusable for multiple jobs.

One-shot thermal fuse link – backup overheat protection in electric furnaces and air handlers.

Honeywell 624775R single-stage standard-opening gas valve. 24 VAC. VR8215S series. Consider the 36G22 — it’s the same valve for less money.

1/3-1/6 HP 2-speed condenser motor, 825 RPM, 208-230V. Trane mounting configuration. Replaces Trane and other brand condenser fan motors.

120V condensate pump with built-in overflow safety switch. Pumps condensate away from your AC or furnace when gravity drain isn’t possible. Standard 120V plug-in.

Packard EC Max electronically commutated direct-drive blower motor, 3/4 HP, 115/230 V dual voltage, 1075 RPM, 4 speeds.

Uniweld Ez-Turn anti-blowback mini split adapter. Converts a 1/4 in. male flare service port to the 5/16 in. (1/2-20) female fitting used on R-410A mini split service valves, and the gas-retaining design holds charge while you connect.