Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit
Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.
¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 241–250 of 1617 results
White-Rodgers 36J Series two-stage, slow-opening combination gas valve for 24 VAC furnaces using hot surface ignition (HSI) or direct spark ignition (DSI). Pipe size is 1/2" x 1/2" NPT straight through with inlet and outlet pressure taps, and both an LP conversion kit and reducer bushing kit are included.
Supco low-pressure switch — opens at 35 PSI, closes at 60 PSI. 1/4″ SAE flare fitting, auto-reset. Protects compressor from low refrigerant pressure.
Silicon nitride ignitor for Trane/American Standard furnaces. 120V. Replaces IGN00152 and IGN00146. Direct replacement SSN087KS.
Draft inducer motor for Carrier, Bryant and Payne gas furnaces, recorded internally as 1183450. The inducer motor drives the combustion blower that purges the heat exchanger and pulls flue products through the vent, and its operation is what the furnace pressure switch proves before ignition.
CT-122 service ratchet wrench by Everwell. Four sizes in one chrome-plated tool with reversible ratchet. Built for HVAC valve and fitting work.
R-8 fiberglass duct wrap, 3″ thick, 4′ x 48′ roll with foil backing. Wraps around metal ductwork to insulate it. Required for ductwork in attics and unconditioned spaces.
45 MFD 440V round run capacitor. Powers a single motor — compressor or fan. American-made by Titan HD with 60,000-hour rated life.
Goodman B1809913S control board (50T35-743 / ICM280 aftermarket). Fits GMP and GMT series Goodman furnaces. Direct OEM replacement for older B18099 revisions.
McDaniel Metals DHZECNJ3672 horizontal economizer for 3-6 ton Daikin and Goodman package units. Honeywell JADE control, factory wired.
C&D CD1454/2 brass fitting, 2-pack. 1/4″ female flare to 1/4″ male flare with installed valve core. Adds a Schrader core to a port that doesn’t have one.