42-101233-81 – FURNACE PRESSURE SWITCH (-0.35PF)
$56.59Rheem 42-101233-81 furnace pressure switch, -0.35″ WC. OEM for Rheem/Ruud RGPJ series furnaces. Also replaces 42-24194-01 and 42-24194-01K.
Showing 241–288 of 1291 results
-
-
42-105583-04 – FURNACE PRESSURE SWITCH (-0.40PF)
$34.21Rheem 42-105583-04 furnace pressure switch, -0.40″ WC. OEM replacement for Rheem and Ruud gas furnaces. Verifies inducer draft before ignition.
-
42-105601-29 – FURNACE PRESSURE SWITCH (-0.20PF)
$34.21Rheem 42-105601-29 furnace pressure switch, -0.20″ WC. OEM Rheem part that also cross-references to Carrier HK06WC090. Works in both Rheem and Carrier furnaces.
-
42-107430-03 – CIRCUIT BREAKER (60A, DIN RAIL, LUG/LUG)
$43.88Rheem 42-107430-03 circuit breaker, 60A, 2-pole, 230V, DIN rail mount, lug/lug connections. Provides overcurrent protection inside the HVAC equipment cabinet.
-
42-22692-06 – DOOR INTERLOCK SWITCH (RHEEM, YORK)
$21.99Rheem 42-22692-06 furnace door safety switch. SPST normally open, push-button style. Shuts off the furnace when the access panel is removed. Also fits York.
-
42-23114-06 – RELAY (24 VAC COIL)
$19.81Rheem 42-23114-06 fan relay. 24V SPDT. OEM replacement for Rheem and Ruud furnaces and air handlers. Controls blower fan on/off switching.
-
42-23116-01 – HEAT SEQUENCER (SPST)
$38.2624V SPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Single-pole single-throw configuration for staging one heating element.
-
42-23116-06 – HEAT SEQUENCER (DPST)
$36.9224V DPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Double-pole single-throw for controlling two circuits simultaneously.
-
42-23116-07 – HEAT SEQUENCER (TPST)
$37.1624V TPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Triple-pole single-throw for staging three circuits on timed delay.
-
42-23116-08 – HEAT SEQUENCER (DPST)
$31.0224V DPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Double-pole single-throw configuration. Different timing than 42-23116-06.
-
42-23116-09 – HEAT SEQUENCER (TPST)
$40.2724V TPST heat sequencer. OEM Rheem/Ruud part for electric furnaces. Triple-pole single-throw for staging three circuits. Different timing than 42-23116-07.
-
42-24194-82 – FURNACE PRESSURE SWITCH (-0.30PF)
$56.73Rheem 42-24194-82 furnace pressure switch, -0.30″ WC. OEM for Rheem and Ruud furnaces. Also listed as 42-106257-01. Monitors inducer draft for safe operation.
-
42004 – REFRIGERANT MANIFOLD GAUGES (R404A/R22/R410A, BRASS, 5′ HOSE SET)
$175.55Yellow Jacket 42004 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-404A, R-22, and R-410A.
-
42036 – REFRIGERANT MANIFOLD GAUGES (R32/R454B/R410A, BRASS, 5′ HOSE SET)
$193.10Yellow Jacket 42036 Series 41 manifold gauge set with 60″ PLUS II hoses. Brass body, 3-1/8″ gauges. Rated for R-32, R-454B, and R-410A — ready for next-gen refrigerants.
-
425097K – CIRCUIT BREAKER (LINE – LUG/LOAD – QUICK CONNECT, DIN RAIL, 60A)
$60.02Rheem 425097 circuit breaker, 60A, 2-pole, DIN rail mount, lug-to-quick-connect terminals. Internal equipment breaker for Rheem/Ruud heat pumps and air handlers.
-
42511 – INSULATION TAPE (2″X30′)
$8.992″ x 30′ self-adhesive insulation tape. Foam tape that prevents condensation on cold pipes and ducts. For HVAC, plumbing, and refrigeration lines.
-
43004A – MECHANICAL THERMOSTAT (HORIZONTAL)
$38.99Supco 43004A mechanical thermostat. Horizontal mount. For 4 or 5-wire 24V systems and single-stage heat pumps. Adjustable heat anticipator. No batteries needed.
-
45-100834-80 – COMPRESSOR PLUG (COPELAND, 10 AWG, 6′)
$35.33Copeland compressor wiring harness, 10 AWG, 6-foot lead. Molded plug connects to the compressor terminals. Rheem OEM part 45-100834-80.
-
45-102303-01 – COMPRESSOR PLUG (BRISTOL/DANFOSS)
$38.44Bristol/Danfoss compressor wiring harness. Molded plug connects to the compressor terminals. Rheem OEM part 45-102303-01.
-
45-107231-02 – COMPRESSOR PLUG (LG)
$36.76LG compressor wiring harness. Molded plug connects to the compressor terminals. Rheem OEM part 45-107231-02. Also cross-references 104162-03 and 13U63.
-
45/10/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$42.7145+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
-
45/440 – CAPACITOR (ROUND, MADE IN USA)
$28.7845 MFD 440V round run capacitor. Powers a single motor — compressor or fan. American-made by Titan HD with 60,000-hour rated life.
-
45/5/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$38.3245+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
-
45/7.5/440 – DUAL CAPACITOR (ROUND, MADE IN USA)
$38.4845+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Fits most residential AC systems. American-made by Titan HD.
-
45+10X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$29.4545+10 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
45+5X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$29.2545+5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
45+7.5X440 – DUAL CAPACITOR (ROUND, MADE OVERSEAS)
$29.2545+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.
-
46-TLT40 – TRANSFORMER (120/208/240 to 24V, 40VA)
$31.99Multi-tap transformer, 120/208/240V to 24V, 40VA. Universal foot-mount design fits most residential and light commercial HVAC systems. Replaces Jard 4031OEM and Mars 44517.
-
46010 – REFRIGERANT MANIFOLD GAUGES (4 VALVE, ALUMINUM, NO HOSES)
$265.89Yellow Jacket 46010 BRUTE II 4-valve manifold — aluminum body, 3/8″ bore, no hoses. Full-size 3-1/8″ gauges. Faster vacuum and charging than 2-valve manifolds.
-
47-100436-02 – CONTROL BOARD – X13 ECM (RHEEM, AIR HANDLER)
$80.10Rheem 47-100436-02 control board for air handlers with X13 ECM motors. OEM replacement — also cross-references 47-102077-02, 47-102077-05, and 48X21-811.
-
47-100436-05 – CONTROL BOARD – PSC MOTOR (RHEEM, AIR HANDLER)
$76.92Rheem 47-100436-05 control board for air handlers with PSC motors. OEM replacement for Rheem and Ruud air handlers. Manages blower motor speed and timing.
-
47-100436-08 – CONTROL BOARD (RHEEM)
$55.28Rheem 47-100436-08 control board for Rheem and Ruud air handlers. OEM replacement with motor control and diagnostic capabilities.
-
47-100436-84J – CONTROL BOARD (RHEEM)
$85.80Rheem 47-100436-84J blower control board for Rheem and Ruud air handlers. OEM replacement — also listed as 47-100436-04. Controls blower motor speed and airflow.
-
47-102684-204 – DEFROST CONTROL BOARD
$107.95Rheem 47-102684-204 defrost control board for heat pumps. Manages defrost timing to prevent ice buildup on outdoor coil. OEM Rheem/Ruud replacement.
-
47-102684-83 – DEFROST CONTROL BOARD WITH SENSORS (RHEEM)
$113.38Rheem 47-102684-83 defrost control board kit with sensors. Manages defrost timing on Rheem/Ruud heat pumps. Includes defrost sensors.
-
47-104990-04 – HIGH TEMPERATURE LIMIT SWITCH (3″, ODD BASE, L150°)
$34.19Rheem 47-104990-04 high limit switch, 3-inch insertion, odd base, opens at 150°F. Auto reset. OEM replacement for Rheem and Ruud furnaces.
-
47-22860-01 – AUTO LIMIT SWITCH WITH ANTICIPATOR (RHEEM, L105°)
$34.34Rheem 47-22860-01 auto reset limit switch with built-in anticipator, opens at 105°F. OEM for Rheem and Ruud furnaces. Low-temp cutoff for heat pump applications.
-
47-22860-02 – AUTO LIMIT SWITCH WITH ANTICIPATOR (RHEEM, L110°)
$28.60Rheem 47-22860-02 auto reset limit switch with built-in anticipator, opens at 110°F. Replaces 47-22860-06. OEM for Rheem and Ruud furnaces.
-
47-22861-03 – LIMIT SWITCH (RHEEM, MICRO, WIDE MOUNT, L250°)
$15.93Rheem 47-22861-03 manual reset limit switch, opens at 250°F. Wide mount, micro size. OEM flame rollout switch for Rheem and Ruud furnaces.
-
47-25349-01K – HIGH TEMPERATURE LIMIT SWITCH (3″, ODD BASE, L160°)
$27.90Rheem 47-25349-01 high limit switch, 3-inch insertion, odd base, opens at 160°F. Auto reset. Kit version (47-25349-01K). OEM for Rheem and Ruud furnaces.
-
47-25349-03 – HIGH TEMPERATURE LIMIT SWITCH (3″, ODD BASE, L150°)
$29.48Rheem 47-25349-03 high limit switch, 3-inch insertion, odd base, opens at 150°F. Auto reset. OEM replacement for Rheem and Ruud furnaces.
-
4711 – 18/5 THERMOSTAT WIRE (250′)
$101.6618/5 thermostat wire, 250-foot roll. Five conductors for standard heating/cooling systems. UV-resistant PVC jacket. Run new wire for a thermostat upgrade or replacement.
-
48-32-4803 – BIT HOLDER
$2.99Milwaukee 48-32-4803 magnetic bit holder. 3-inch impact-duty design locks bits tight during high-torque driving. Fits all standard 1/4″ hex shank bits.
-
49100 – REPLACEMENT CRYSTAL (3-1/8″)
$10.24Yellow Jacket 49100 replacement gauge crystal, 3-1/8″ (80mm). Polycarbonate. Fits BRUTE II manifolds and other 3-1/8″ dry gauges. Clear view, impact resistant.
-
49190 – GAUGE BOOTS (3-1/8″ PROTECTIVE RUBBER COVERS)
$25.47Yellow Jacket 49190 protective gauge boot set — red and blue rubber covers for 3-1/8″ manifold gauges. Cushion against drops and impacts without blocking the gauge face.
-
4C1827CCW – FAN BLADE (4, 18″, 27°, CCW, HUBLESS)
$92.92Lau 60558201 (4C1827CCW) condenser fan blade — 18″, 4-blade, 27° pitch, CCW rotation, hubless. Fits Revcor R41804 cross-reference.
-
4C2227CCW – FAN BLADE (4, 22″, 27°, CCW, HUBLESS)
$104.42Fasco 4C2227CCW condenser fan blade — 22″, 4-blade, 27° pitch, CCW rotation, hubless. Cross-references Revcor R42207 and Lau 60559401.
-
5/32ALLEN – WRENCH
$9.88Malco WT9532G T-handle hex key, 5/32″ size, 9″ long. Vinyl cushion grip and alloy steel. Common size for HVAC setscrews and motor mount bolts.
