3/8CC – REFRIGERATION COPPER FITTING (3/8″ COUPLING WITH STOP)
3/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/8″ copper pipe in a straight line. Wrot copper for brazing.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 1–10 of 1291 results

3/8″ ACR copper coupling with rolled stop (C x C). Joins two pieces of 3/8″ copper pipe in a straight line. Wrot copper for brazing.

Supco SF8408 Stinger line service valve. 1/8″ OD with 2″ copper tubing extension and plain cap. Braze-on access point for small refrigerant lines.

1 HP ECM X13 constant-torque blower motor, 115/208-230V dual voltage. Replaces multiple Goodman, Trane, and Lennox X13 motors. Preprogrammed with harness included.

18″ aluminum 3-blade condenser fan blade. 33° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

Hydro-Balance ZipFoam ZC-01 condenser coil cleaner, 18 oz aerosol. Non-acidic foaming spray for outdoor coils. Ready to use — no mixing needed. Rinse with hose.

York S1-02532606000 high limit switch, 3-inch insertion, odd base, opens at 210°F, closes at 180°F. OEM auto-reset limit for York furnaces.

EAFHG1425-2 filter base for gas furnaces, 14×25 filter size. Accepts a 1″ thick filter. Insulated housing with magnetic door latch. Up to 5 tons.

18″ aluminum 4-blade condenser fan blade. 34° pitch, CCW rotation, hub on intake side. Replacement for HVAC condenser and heat pump units.

24″ x 21″ x 36″ R6 insulated galvanized plenum. Connects your air handler or cased coil to the ductwork. Fiberglass lined to reduce condensation and duct noise.

24V heat sequencer with 1 DPST and 1 SPST relay in series. Handles up to 25 amps. Replaces Nordyne 621678 and HS24A345. Common electric furnace part.