FS6 – START COLLAR
6″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.
Walk in. We test every part free at the counter. Open to homeowners, contractors, and multifamily — no account or minimum order.
Popular: 45/5 capacitor ECM blower Honeywell ignitor 24V contactor Hard start kit

Ten departments, organized the way our counter is. Every category is on the shelf today.
Bring your old part. We'll diagnose it, find the replacement, and bench-test the new one at the counter before you leave — so you only make one trip.

¿Buscas partes de HVAC en Dallas?
Visita nuestra página en español — mismas partes, mismo mostrador, atendido en español.
Ver página en español →Showing 1–10 of 1291 results

6″ galvanized start collar for connecting round duct to a sheet metal or ductboard plenum. Crimped end for easy duct attachment. Standard residential HVAC ductwork fitting.

1/2″ x 1.5″ black steel gas pipe nipple. Male NPT threads on both ends. For natural gas and propane piping in HVAC and plumbing systems.

OEM Carrier/Bryant/Payne gas valve. EF32CW210 direct ignition, 24V, natural gas, 3.5″ WC, 1/2″ NPT. Replaces EF32CW206 and 36G24-618.

20″ aluminum 3-blade condenser fan blade. 30° pitch, CW rotation, hubless (no hub). Replacement for HVAC condenser and heat pump units.

2″ x 30′ self-adhesive insulation tape. Foam tape that prevents condensation on cold pipes and ducts. For HVAC, plumbing, and refrigeration lines.

30′ insulated mini-split line set with pre-flared 1/4″ and 3/8″ copper lines. 1/2″ insulation. Longer run for installs where the condenser is far from the wall unit.

Temperature fuse link, opens at 438°F (228°C). 15 Amp rated. One-time-use thermal safety device — if it’s blown, the system overheated and needs the fuse link replaced.

30″W x 10″T return air grille with fixed louver blades. White powder-coated steel. Mounts on wall or ceiling over your return duct opening.

35+7.5 MFD 440V dual run capacitor. Powers both the compressor and condenser fan motor. Budget-friendly TrueLine replacement for residential AC.

7/8″ ACR copper 90° long radius street elbow (FTG x C). One end fits inside a fitting, the other accepts pipe. Wrot copper for brazing.